 |
≫ |
|
|
|
パッチ名: PHCO_33171
パッチ摘要: s700_800 11.23 auto_parms/set_parms/dhcpdb2conf
作成日: 05/07/25
公開日: 05/09/09
警告: 05/11/17 - これは、当社からの警告("Non-Critical"レベル)です。
- PHCO_33171をインストールすると、xntpd(1M)が起動されないか、正しく構
成されないことがあります。DHCPを使用可能にすると、NPTがDHCPサーバー
の指示どおりに構成されます。そのため、DHCPサーバーがNTP構成情報を戻
さないと、NTPが使用不能になり、DHCPサーバーが一部のNTPサーバーしか戻
さないと、/etc/ntp.confに追加したNTPサーバーエントリが削除される可能
性があります。また、PHCO_33171をインストーすると、
/etc/rc.config.d/netdaemons内の"XNTPD"変数が不正に"0"に設定されたり、
手動で追加した"NTPDATE_SERVER"変数がブート時に削除されることもありま
す。
- この問題の詳細は、サービス要求8606419977(JAGaf79807)を参照してくださ
い。
- DHCPサーバーが一部のNTP構成情報しか提供しない場合は、この問題を回避
するために、DHCPクライアントとしてブートするシステムからPHCO_33171を
削除するようお勧めします。
- この問題は、まもなくリリースする予定のPHCO_34014で解決されます。
警告: 07/02/06 - これは、当社からの警告(Non-Criticalレベル)です。
- PHCO_33171をインストールすると、PHCO_31848で導入した拡張機能(サービ
ス要求8606330912(JAGae92033)を参照)が失われます。この拡張機能の目的
は、一時ファイルがルートファイルシステム上に累積しないように、ルート
ファイルシステム上の/tmp内に作成した一時ファイルを、/tmpファイルシス
テムをマウントする前に削除することです。
- 後継パッチPHCO_34014およびPHCO_34838でも同じ問題が起きます。
- この問題の詳細は、サービス要求8606475421(JAGag29772)を参照してくださ
い。
- サイズが500バイト未満で、名前がsh$$.[0-9]*という形式の一時ファイルが
/tmpマウントポイントの下に残る場合は、特に問題はないので、アクション
を取る必要はありません。テストしたところでは、システムをリブートする
たびに、そのような4個のファイルが、/tmpファイルシステムをマウントす
る前に、ルートファイルシステム上の/tmpディレクトリ内に作成されます。
- この問題を回避するには、システムをシングルユーザーモードにして/tmpフ
ァイルシステムをアンマウントし、次に、ルートファイルシステム上の/tmp
内のファイルを削除します。
ハードウェアプラットフォームおよびOSリリース:
s700: 11.23
s800: 11.23
現象:
PHCO_33171:
1. (SR:8606410690 DTS:JAGaf70572)
セグメンテーション違反により、dhcpdb2confでコアダンプが取られることが
あります。
2. (SR:8606405117 DTS:JAGaf65037)
/etc/default/tzの内容は時間帯を表わしています。ところが、set_parmsがこ
のファイルのデフォルトの内容(EST5EDT)を変更しません。
3. (SR:8606404494 DTS:JAGaf64416)
IPアドレスを変更する場合、set_parmsは/sbin/ch_hostname.d内にある多数の
ホスト名変更プログラムも実行する必要があります。そうでないと、それらの
変更がこれらの外部プログラムに通知されません。
4. (SR:8606404500 DTS:JAGaf64422)
DHCPサーバーが複数の経路を戻しても、デフォルトの経路が1つしか構成され
ません。
5. (SR:8606401644 DTS:JAGaf61581)
先頭の数字は許されないため実際にはエラーになっているのに、あたかも先頭
の数字を許容するようなメッセージが表示されます。
6. (SR:8606378358 DTS:JAGaf38616)
システムのシャットダウン時にも、/etc/fstab内にリストされているファイル
システムをすべてマウントするため、無駄な時間がかかります。
7. (SR:8606382158 DTS:JAGaf42369)
set_parms/auto_parmsを実行すると、/etc/resolv.conf内で指定した新たな
ネットワーク構成情報が消失することがあります。変更済みの構成が以前の構
成で上書きされてしまいます。
8. (SR:8606391190 DTS:JAGaf51335)
この製品アップデートは、システムのノード名とホスト名の最大長を拡張する
機能を事前に使用可能にします。実際の拡張機能は、今後リリースされるHP-
UXノード名およびホスト名拡張製品で提供されます。
9. (SR:8606391359 DTS:JAGaf51503)
ロングホスト名を使用すると、set_parmsが紛らわしいメッセージを生成しま
す。
10.(SR:8606391360 DTS:JAGaf51504)
set_parmsを使ってロングホスト名を設定することができません。
11.(SR:8606391847 DTS:JAGaf51979)
set_parms/auto_parmsを実行すると、/etc/resolv.conf内で指定した新たな
ネットワーク構成情報が消失することがあります。新たな構成が以前の構成で
上書きされてしまいます。
12.(SR:8606401511 DTS:JAGaf61448)
DHCPのブート後NTPサーバーが提供されないと、/etc/rc.config.d/netdaemons
内に"export XNTPD=1"が設定されるため、xntpdが無効なサーバーアドレス
"0.0.0.0"で始まります。
13.(SR:8606400640 DTS:JAGaf60589)
set_parmsが使用する/sbin/set_parms.utilでは、PATHに
/sbin:/usr/sbin:/usr/bin/X11:/usr/vue/bin:/usr/bin:/usr/lbinを設定すべ
きです。通常は、/usr/binを/usr/sbinや/sbinitの前に置くことになっていま
すが、この特殊なスクリプトでは、パスを設計方針どおりに設定すべきです。
問題点の説明:
PHCO_33171:
1. (SR:8606410690 DTS:JAGaf70572)
使用する前に、あるポインタが適切に初期化されていないことがありました。
2. (SR:8606405117 DTS:JAGaf65037)
時間帯の変更時に、set_parmsは/etc/default/tzを変更できませんでした。
3. (SR:8606404494 DTS:JAGaf64416)
set_parmsプログラムは、外部プログラムがIPアドレスの変更に応答する方法
を提供していました。つまり、IPアドレスの変更時に、/sbin/ch_hostname.d
ではなく/sbin/ch_ip_address.d内のプログラムを実行していました。
4. (SR:8606404500 DTS:JAGaf64422)
dhcpdb2confプログラムの当初の設計では、DHCPが複数のデフォルト経路を戻
す可能性があることを想定していませんでした。
5. (SR:8606401644 DTS:JAGaf61581)
実際のコードには新たな制限が組み込まれているのに、メッセージが旧いまま
でした。
6. (SR:8606378358 DTS:JAGaf38616)
システムのシャットダウン時にはauto_parmsが実行されますが、そのたびにす
べてのファイルシステムがマウントされていました。この動作は、システムの
起動時には正常ですが、シャットダウン時には不適切です。
7. (SR:8606382158 DTS:JAGaf42369)
ネットワーク構成を一時的に変更する必要がある場合、set_parmsは現在の構
成を保存します。ところが、保存済みの構成がある場合にユーザーがネット
ワークパラメータを変更すると、保存済みの構成が復元され、ユーザーが変更
した構成が消失していました。ユーザーが構成変更を行った場合は、保存済み
の構成は無効なので削除する必要があります。
8. (SR:8606391190 DTS:JAGaf51335)
この製品アップデートには、今後リリースされるHP-UXノード名およびホスト
名拡張製品バンドル(NodeHostNameXpnd)を事前に使用可能にするために必要な
一部の拡張機能が含まれています。
この機能を使うと、ホスト名とそのコンポーネントの最大長を、それぞれ255
文字、63文字にすることができますが、全HP-UXソフトウェアとの互換性を維
持するために、できるだけ、ホスト名の最大長を63文字(コンポーネントの場
合は8文字)のままにされるようお勧めします。
9. (SR:8606391359 DTS:JAGaf51503)
set_parmsに新たなシステム機能を導入しました。
10.(SR:8606391360 DTS:JAGaf51504)
set_parmsはロングホスト名を適切にサポートしていませんでした。
11.(SR:8606391847 DTS:JAGaf51979)
ネットワーク構成を一時的に変更する必要がある場合、set_parmsは現在の構
成を保存します。ところが、保存済みの構成がある場合にユーザーがネット
ワークパラメータを変更すると、保存済みの構成が復元され、ユーザーが変更
した構成が消失していました。ユーザーが構成変更を行った場合は、保存済み
の構成は無効なので削除する必要があります。
12.(SR:8606401511 DTS:JAGaf61448)
DHCPサーバーは有効なNTPサーバーアドレスを提供していないのに、
dhcpdb2confが不正に/etc/rc.config.d/netdaemons内にXNTPD=1を設定してい
ました。
13.(SR:8606400640 DTS:JAGaf60589)
スクリプトの設計方針どおりにPATH変数を設定しました。これが意図的なもの
であることがわかるように、このパス順序の理由を説明するコメントを追加し
ました。
-----------------------------------------------------------------------------
Patch Name: PHCO_33171
Patch Description: s700_800 11.23 auto_parms/set_parms/dhcpdb2conf
Creation Date: 05/07/25
Post Date: 05/09/09
Warning: 05/11/17 - This Non-Critical Warning has been issued by HP.
- PHCO_33171 introduced behavior that can result in xntpd(1M)
not being started or being configured incorrectly. If DHCP
is enabled, NTP is configured as directed by the DHCP server.
This can result in NTP being disabled if the DHCP server does
not return NTP configuration information and NTP server
entries which have been added to /etc/ntp.conf being removed
if the DHCP server does not return all NTP servers. Also,
the 'XNTPD' variable in /etc/rc.config.d/netdaemons may be
incorrectly set to '0' and manually added 'NTPDATE_SERVER'
variable lines may be removed at boot time if PHCO_33171 is
installed.
- Additional information on this behavior may be found in
Service Request 8606419977 (JAGaf79807).
- To avoid this behavior, HP recommends removing PHCO_33171
from systems booted as DHCP clients if all NTP configuration
information is not provided by the DHCP server.
- This behavior will be corrected in PHCO_34014, which will be
released as soon as possible.
Warning: 07/02/06 - This Non-Critical Warning has been issued by HP.
- PHCO_33171 introduced behavior that breaks the enhancement
documented in Service Request 8606330912 (JAGae92033) that
was introduced in PHCO_31848. The purpose of the enhancement
was to remove temporary files created in /tmp on the root
file system before the /tmp file system is mounted so that
the files did not accumulate over time on the root file
system.
- The same behavior is experienced with superseding patches
PHCO_34014 and PHCO_34838.
- Additional information on this behavior may be found in
Service Request 8606475421 (JAGag29772).
- If temporary files with names of the form sh$$.[0-9]*, each
with a size less than 500 bytes, remaining under the /tmp
mount point is not a problem, then no action is required. As
tested, each reboot of the system results in four such files
being created in the /tmp directory on the root file system
before the /tmp file system is mounted.
- To work around the behavior, the files can be manually
removed by bringing the system into single-user mode, which
unmounts the /tmp filesystem, and simply removing the files
in /tmp on the root file system.
Hardware Platforms - OS Releases:
s700: 11.23
s800: 11.23
Products: N/A
Filesets:
SystemAdmin.FIRST-BOOT,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP
Automatic Reboot?: No
Status: General Superseded With Warnings
Critical:
Yes
PHCO_33171: CORRUPTION ABORT
8606382158 JAGaf42369:
In some cases set_parms or auto_parms may lose new
networking configuration information specified in
/etc/resolv.conf. The modified configuration is
overwritten with the prior configuration.
PHCO_31848: HANG
8606286645 JAGae50584: Moving a system using DHCP
from one subnet to another subnet without this patch
may result in a networking hang during system boot.
Category Tags:
defect_repair hardware_enablement enhancement
general_release critical halts_system corruption
Path Name: /hp-ux_patches/s700_800/11.X/PHCO_33171
Symptoms:
PHCO_33171:
SR:8606410690 DTS:JAGaf70572
dhcpdb2conf may coredump from a segmentation violation.
SR:8606405117 DTS:JAGaf65037
The contents of /etc/default/tz indicate the timezone.
The default contents of this file (EST5EDT) is not
modified by set_parms.
SR:8606404494 DTS:JAGaf64416
Many of the hostname change programs in
/sbin/ch_hostname.d also need to run when set_parms
changes the IP address. There is no way for these external
programs to be aware of set_parms IP address changes.
SR:8606404500 DTS:JAGaf64422
Only one default route will be configured, even if the DHCP
server returned more than one route.
SR:8606401644 DTS:JAGaf61581
A message implies that a leading digit is permitted when
in fact it is disallowed and results in an error.
SR:8606378358 DTS:JAGaf38616
All filesystems listed in /etc/fstab are mounted during
system shutdown, resulting in unnecessary delays.
SR:8606382158 DTS:JAGaf42369
In some cases set_parms or auto_parms may lose new
networking configuration information specified in
/etc/resolv.conf. The modified configuration is
overwritten with the prior configuration.
SR:8606391190 DTS:JAGaf51335
This product update provides pre-enablement for future
expansion of the maximum length of the system nodename
and hostname. Any actual expansion capability may be
provided in a future HP-UX nodename and hostname
expansion product.
SR:8606391359 DTS:JAGaf51503
A misleading message was issued by set_parms when a long
hostname is used.
SR:8606391360 DTS:JAGaf51504
Cannot use set_parms to set a longer hostname.
SR:8606391847 DTS:JAGaf51979
In some cases set_parms or auto_parms may lose new
networking configuration information specified in
/etc/resolv.conf. The new configuration is overwritten
with the prior configuration.
SR:8606401511 DTS:JAGaf61448
After booting with DHCP, if an NTP server was not supplied,
"export XNTPD=1" was set in /etc/rc.config.d/netdaemons,
resulting in xntpd being started with an invalid server
address of "0.0.0.0".
SR:8606400640 DTS:JAGaf60589
In /sbin/set_parms.util used by set_parms) sets PATH to
/sbin:/usr/sbin:/usr/bin/X11:/usr/vue/bin:/usr/bin:/usr/lbin
In general, it is preferable to have /usr/bin ahead of
/usr/sbin and /sbin. However, for this particular script,
the path is set as it is in an intentional design decision.
PHCO_31848:
SR:8606167180 DTS:JAGad36466
When /etc/rc.config.d/netconf contains entries which
skip an index value, dhcpclient negotiation may be
attempted using a zero-length lan interface name. This
will result in a dhcpclient usage error message.
SR:8606368081 DTS:JAGaf28645
If set_parms is run with file systems that contain
critical commands unmounted, a number of error messages
and set_parms messages may be generated. These messages
may cause the original root cause failure message to
scroll off the screen and make problem diagnosis
difficult.
SR:8606339993 DTS:JAGaf00914
This product update provides pre-enablement for future
expansion of the maximum length of the system nodename and
hostname. Any actual expansion capability may be provided
in a future HP-UX nodename and hostname expansion product.
Upon installation, the nodename and hostname expansion
bundle (NodeHostNameXpnd) will install the full set of
product updates (including this one) needed to enable the
expansion.
If the nodename and hostname expansion bundle is not
installed, this product update will have no affect on your
system.
SR:8606193195 DTS:JAGad62407
The dhcpdb2conf command does not support multiple NIS
servers on a domain for fallback.
SR:8606186632 DTS:JAGad55842
Support for Dynamic DNS (DDNS) is missing.
SR:8606286645 DTS:JAGae50584
When a system configured for DHCP is moved to a new subnet
the system may hang on reboot when attempting to renew a
lease for an IP address not valid on the new subnet.
SR:8606136258 DTS:JAGad05384
A number of timezones in Asia and other parts of the world
are missing from set_parms. The timezone in South Africa
is incorrectly set to the wrong timezone and incorrectly
includes daylight savings.
SR:8606286648 DTS:JAGae50587
The auto_parms command may be allowed to execute other
than at initial boot when it should not.
SR:8606296843 DTS:JAGae60395
If the file /-r (a file named "-r" in the root directory)
exists on a system the system will boot into single user
mode rather than the correct multi-user mode.
SR:8606364587 DTS:JAGaf25226
When using the set_parms command to set the date with
values such as "8" or "9" the following error message is
generated "The specified number is not valid for this
command."
SR:8606200076 DTS:JAGad69260
The set_parms command considers IP addresses with values
that start with 0 (zero) as octal. For example, the IP
address 010.035.130.196 would be the same as the IP
address 8.29.130.196.
SR:8606330912 DTS:JAGae92033
If a file system is mounted at /tmp, after a number of
reboots the /tmp directory being hidden "under" the mount
point fills with temp files.
SR:8606187344 DTS:JAGad56551
When auto_parms is run on systems with many disks
"Input line _hp_hide_other_disks cannot be longer
than 3,000 bytes" error messages may be generated.
SR:8606172677 DTS:JAGad41937
On 11.11 systems with hyperfabric and/or atm cards,
the list of lans available for selection is inconsistent.
SR:8606172165 DTS:JAGad41427
Unable to change ip-address using set_parms.
SR:8606187199 DTS:JAGad56407
When using "set_parms timezone" it is not possible to
select the "Middle European daylight saving time" option.
Defect Description:
PHCO_33171:
SR:8606410690 DTS:JAGaf70572
In certain circumstances a pointer was not
properly initialized prior to use.
SR:8606405117 DTS:JAGaf65037
set_parms failed to modify /etc/default/tz when changing
the timezone.
SR:8606404494 DTS:JAGaf64416
The set_parms program did provide a means of having
external programs respond to IP address changes
Programs in /sbin/ch_ip_address.d will be run when
the IP address changes.
SR:8606404500 DTS:JAGaf64422
The original design of the dhcpdb2conf program did not
anticipate the possibility of DHCP returning more than one
default route.
SR:8606401644 DTS:JAGaf61581
Older message does not agree with newer and more restrictive
code.
SR:8606378358 DTS:JAGaf38616
auto_parms is run during system shutdown, and was mounting
all filesystems every time it was run. This is appropriate
for system startup, but not shutdown.
SR:8606382158 DTS:JAGaf42369
When set_parms needs to temporarily change networking
configuration the current configuration is saved. If a saved
configuration existed and the user changed networking
parameters the saved configuration could be restored and the
users changes would be lost. When user changes are made the
saved configuration becomes invalid and should be removed.
SR:8606391190 DTS:JAGaf51335
This product update contains some minor enhancements
required to pre-enable a future HP-UX nodename and
hostname expansion product bundle (NodeHostNameXpnd).
Hostname length may be up to 255 characters and
components of hostnames may be up to 63 characters. A
maximum hostname length of 63 characters (8 character
component length) is still recommended to maintain
compatibility with all HP-UX software.
SR:8606391359 DTS:JAGaf51503
A new system feature was not implemented in set_parms.
SR:8606391360 DTS:JAGaf51504
set_parms did not correctly support long hostnames.
SR:8606391847 DTS:JAGaf51979
When set_parms needs to temporarily change networking
configuration the current configuration is saved. If a saved
configuration existed and the user changed networking
parameters the saved configuration could be restored and the
users changes would be lost. When user changes are made the
saved configuration becomes invalid and should be removed.
SR:8606401511 DTS:JAGaf61448
dhcpdb2conf was incorrectly setting XNTPD=1 in
/etc/rc.config.d/netdaemons even when the DHCP server did
not supply a valid NTP server address.
SR:8606400640 DTS:JAGaf60589
An intentional decision was made to set the PATH variable as
it is in the script. To clarify that this is intentional, a
comment explaining the reason for this path ordering has
been added.
PHCO_31848:
SR:8606167180 DTS:JAGad36466
The auto_parms program sequences through each index
value instead of checking for values correctly defined
in /etc/rc.config.d/netconf. The program assumes index
values will be sequentially used. As a result, DHCP
negotiation may be attempted for index values not
correctly defined.
SR:8606368081 DTS:JAGaf28645
The set_parms command relys on a number of commands in
directories, such as /usr, that may be located on mounted
file systems. This command sometimes runs early in the
boot process. Any issues related to incorrect
configuration become hard to diagnose when missing
command error messages are pushed off the screen by
other messages.
SR:8606339993 DTS:JAGaf00914
This product update contains some minor enhancements
required to pre-enable a future HP-UX nodename and
hostname expansion product bundle (NodeHostNameXpnd).
Hostname length may be up to 255 characters and components
of hostnames may be up to 63 characters. A maximum
hostname length of 63 characters (8 character component
length) is still recommended to maintain compatibility with
all HP-UX software.
SR:8606193195 DTS:JAGad62407
The dhcpdb2conf command only processes the first IP
address in the dhcpclient.data file.
CR:8606186632 DTS:JAGad55842
Lack of support for the dhcpclient -N option in auto_parms
command means the hostname is not added to the DNS
database.
CR:8606286645 DTS:JAGae50584
A system configured for DHCP that is moved to a new subnet
attempts to renew the lease for the IP address on the old
subnet an unlimited number of times.
CR:8606136258 DTS:JAGad05384
The set_parms command has not kept up with the world-wide
expansion of technology. The South Africa timezone was
incorrectly encoded. Many timezones in Asia and other
parts of the world were not included.
SR:8606286648 DTS:JAGae50587
A script test was coded as SUCCESS instead of $SUCCESS
since the 10.20 version of auto_parms.
SR:8606296843 DTS:JAGae60395
If a file named "-r" is present in the directory
where "who -r" is executed the who command operates on
that file.
SR:8606364587 DTS:JAGaf25226
The shell (sh-posix) has had a number of versions. Octal
number handling has changed in different versions. Date
values such as "09" appear like invalid octal values to
the shell.
SR:8606200076 DTS:JAGad69260
The shell (sh-posix) interprets numbers that start with 0
(zero) as octal values. The set_parms warning message is
not enough protection. Unexpected IP address configuration
needs to be prevented.
SR:8606330912 DTS:JAGae92033
Mounting a file system over /tmp hides temp files so the
shell (sh-posix) is unable to remove them. These files
must be explicitly removed prior to file system mount.
SR:8606187344 DTS:JAGad56551
The H/W Path of each device is hidden from install
is saved in _hp_hide_other_disks. This list may be
longer than the 3,000 byte awk string editing buffer.
SR:8606172677 DTS:JAGad41937
Starting with 11.11 the set_parms command gives the user
the choice of which lan card to configure. To create the
list of lan interfaces to select from, set_parms uses both
ioscan and lanscan. There are some devices that show up
in ioscan -kFC lan that are not lan cards (fclan) and
cards that are lans that do not show up in lanscan (atm).
So the lan list indexing fails.
SR:8606172165 DTS:JAGad41427
When "set_parms ip_address" command is issued, the GUI
window pops up asking for the new IP address. When the new
IP address is entered, the command hangs and finally times
out.
SR:8606187199 DTS:JAGad56407
When using "set_parms timezone" it is not possible to
set the "Middle European daylight saving time" option.
Enhancement:
No (superseded patches contained enhancements)
PHCO_31848:
Support added for future maximum length expansion of
nodename and hostname.
SR:
8606167180 8606368081 8606193195 8606186632 8606286645
8606136258 8606286648 8606296843 8606364587 8606200076
8606330912 8606187344 8606172677 8606172165 8606187199
8606339993 8606404494 8606404500 8606401644 8606378358
8606382158 8606391190 8606391359 8606391360 8606391847
8606401511 8606400640 8606405117 8606410690
Patch Files:
SystemAdmin.FIRST-BOOT,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,
v=HP:
/sbin/auto_parms
/sbin/set_parms
/sbin/set_parms.util
/sbin/set_parms.d/05_hostname
/sbin/set_parms.d/10_timezone
/sbin/set_parms.d/12_date_time
/sbin/set_parms.d/15_root_passwd
/sbin/set_parms.d/20_ip_address
/sbin/set_parms.d/25_addl_netwrk
/usr/lbin/dhcpdb2conf
what(1) Output:
SystemAdmin.FIRST-BOOT,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,
v=HP:
/sbin/auto_parms:
$Revision: 10.62 $ $Date: 2005/05/31 23:43:26 $
/sbin/set_parms:
$Revision: 10.35 $ $Date: 2005/05/13 20:52:00 $
/sbin/set_parms.util:
$Revision: 10.38 $ $Date: 2005/06/02 20:59:59 $
/sbin/set_parms.d/05_hostname:
$Revision: 10.30 $ $Date: 2005/05/13 20:51:55 $
/sbin/set_parms.d/10_timezone:
$Revision: 10.14 $ $Date: 2005/06/13 18:49:59 $
/sbin/set_parms.d/12_date_time:
$Revision: 10.11 $ $Date: 2005/04/22 23:40:50 $
/sbin/set_parms.d/15_root_passwd:
$Revision: 10.7 $ $Date: 2005/04/22 23:40:51 $
/sbin/set_parms.d/20_ip_address:
$Revision: 10.29 $ $Date: 2005/05/13 20:51:59 $
/sbin/set_parms.d/25_addl_netwrk:
$Revision: 10.22 $ $Date: 2005/05/13 20:52:00 $
/usr/lbin/dhcpdb2conf:
dhcpdb2conf $Revision: 10.31 $ $Date: 2005/07/27 21:
46:21 $
cksum(1) Output:
SystemAdmin.FIRST-BOOT,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,
v=HP:
1381319412 47227 /sbin/auto_parms
3917140814 30970 /sbin/set_parms
2503959046 61412 /sbin/set_parms.util
3620808120 30260 /sbin/set_parms.d/05_hostname
3118558187 17314 /sbin/set_parms.d/10_timezone
3795004004 11383 /sbin/set_parms.d/12_date_time
2990534603 2322 /sbin/set_parms.d/15_root_passwd
750103493 13116 /sbin/set_parms.d/20_ip_address
1540683660 36300 /sbin/set_parms.d/25_addl_netwrk
3150808359 57344 /usr/lbin/dhcpdb2conf
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes:
PHCO_31848
Equivalent Patches:
PHCO_33170:
s700: 11.11
s800: 11.11
Patch Package Size: 140 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHCO_33171
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHCO_33171.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHCO_33171. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHCO_33171.text file is
available in the product readme:
swlist -l product -a readme -d @ /tmp/PHCO_33171.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHCO_33171.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions: None
|
