 |
≫ |
|
|
|
パッチ名: PHCO_34974
パッチ摘要: s700_800 11.23 累積SAMパッチ
作成日: 07/03/15
公開日: 07/03/20
ハードウェアプラットフォームおよびOSリリース:
s700: 11.23
s800: 11.23
現象:
PHCO_34974:
01)JAGaf89974
SAMは、新たなRoHS PCI muxカードをサポートする必要があります。
02)JAGag00289
SAMの"Disks and File Systems"の下にある"Disk Devices"サブ領域の応答時
間が長すぎます。
03)JAGag04946
複数のプリンタを同時に削除すると、SAMがプリントスプーラを再使用可能に
しません。
04)JAGag24810
SAMと/usr/contrib/bin/machinfoコマンド(現在使用できるのはIntegrityサー
バーの場合のみ)が表示するCPUクロック周波数が異なることがあります。
05)JAGag13171
SAMが、ユーザーの追加時に/etc/skel内のディレクトリをコピーしません。
06)JAGaf98895
SAMが、11.23 0603バージョンに付属しているOnlineJFSバージョン3.5を正し
く検出しません。
07)JAGaf95076
ログインイベントの監査を有効にする際に、SAMが/etc/rc.config.d/auditing
ファイル内に不正なエントリを作成します。
08)JAGag11000
SAMがIGELANドライバの正しい最小MTUを表示しません。
09)JAGag10997
SAMがIETHERドライバの正しい最小MTUを表示しません。
10)JAGag18919
SAMが不正にread-mostlyファイルシステムを構成します。
11)JAGaf94483)
SAMがautomounterファイルを正しく解析できません。
12)JAGag30161
SAMのネットワークサービスが、使用可能なftpを使用不可と表示します。
問題点の説明:
PHCO_34974:
01)JAGaf89974
SAMは、pci_mux1ドライバを使用する新たなPCI muxカードをサポートする必要
があります。
解決方法:
pci_mux1ドライバを使用する新たなmuxカードをサポートするようにSAMを修正
しました。
02)JAGag00289
複数のパスで構成された大規模ディスクアレイに接続されている場合、SAMの
"Disks and File Systems"の下にある"Disk Devices"サブ領域の応答時間が長
すぎました。
解決方法:
複数のパスをより速く検出できるアルゴリズムを使ってSAMの"Disk Devices"
の応答時間を約40%短縮しました。
03)JAGag04946
SAMを使って複数のプリンタを同時に削除すると、削除後、SAMはプリントスプ
ーラを再使用可能にしていませんでした。
解決方法:
この問題の原因である競合をなくすことによってプリントスプーラを再使用可
能にするようにSAMのコードを修正しました。
04)JAGag24810
SAMと/usr/contrib/bin/machinfoコマンド(現在使用できるのはIntegrityサー
バーの場合のみ)が表示するCPUクロック周波数が異なることがありました。
デュアルコアItanium 2ベースマシンには、ITC周波数とコア周波数という2つ
の周波数があります。 パッチPHCO_33751が適用されている場合、machinfo(1)
は、ITC周波数ではなくコア周波数を表示します。ところが、SAMはITC周波数
だけを表示していました。
解決方法:
/usr/contrib/bin/machinfoがインストールされたマシンでは、machinfo(1)が
報告するCPUコア周波数も表示するようにSAMのコードを修正しました。
05)JAGag13171
SAMはファイルだけしかコピーできないプログラムを使用していたため、
/etc/skel内のディレクトリがコピーされませんでした。
解決方法:
/etc/skel内のファイルとディレクトリを両方ともコピーするようにSAMのコー
ドを修正しました。
06)JAGaf98895
Online JFS 3.5の検出方法が不適切だったため、SAMは、11.23 0603バージョ
ンに付属しているOnlineJFSバージョン3.5を正しく検出しませんでした。
解決方法:
Online JFSがライセンスされているかチェックするために実行していたコマン
ドを修正しました。
07)JAGaf95076
フィルタを使ってログオフを/usr/sbin/audeventコマンドの出力から除去して
いなかったため、成功および失敗ログインイベントの監査を有効にする際に、
SAMは/etc/rc.config.d/auditingファイル内に不正なエントリを作成していま
した。
解決方法:
フィルタを使ってログオフを/usr/sbin/audeventコマンドの出力から除去する
ようにSAMのコードを修正しました。
08)JAGag11000
IGELANドライバは、1024バイトではなく、もっと小さい257バイトのMTUをサポ
ートするようにアップデートされています。したがって、新たな最小値を表示
するようにSAMを修正する必要があります。
解決方法:
MTUの新たな最小値をサポートするようにSAMのコードを修正しました。
09)JAGag10997
IETHERドライバは、1024バイトではなく、もっと小さい257バイトのMTUをサポ
ートするようにアップデートされています。したがって、新たな最小値を表示
するようにSAMを修正する必要があります。
解決方法:
MTUの新たな最小値をサポートするようにSAMのコードを修正しました。
10)JAGag18919
SAMは不正に、read-mostlyファイルシステムを構成していました。エクスポー
トファイルシステムの読み取り書き込みリスト内と読み取り専用リスト内の両
方にエントリがあると、SAMは読み取り専用リスト内のエントリを削除してい
ました。
解決方法:
両リスト内の既存のエントリを維持するようにSAMのコードを修正しました。
11)JAGaf94483
automounterファイル内に、次の行が継続行であることを示す"\"と改行文字と
の間に空白文字のある行が含まれていると、SAMはそのautomounterファイルを
正しく解析できませんでした。
解決方法:
"\"と改行文字との間に空白文字のある行を正しく処理するようにSAMのコード
を修正しました。
12)JAGag30161
/etc/servicesファイル内にftp-dataポートが指定されていないと、SAMのネッ
トワークサービスは、使用可能なftpを使用不可と表示していました。
解決方法:
ftp-dataポートを使用不可にしても、ftpのステータスを正しく表示するよう
にSAMのコードを修正しました。
-----------------------------------------------------------------------------
Patch Name: PHCO_34974
Patch Description: s700_800 11.23 cumulative SAM patch
Creation Date: 07/03/15
Post Date: 07/03/20
Hardware Platforms - OS Releases:
s700: 11.23
s800: 11.23
Products: N/A
Filesets:
InternetSrvcs.INETSVCS-BOOT,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP
OS-Core.UX-CORE,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP
SystemAdmin.SAM,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP
SystemAdmin.SAM-ENG-A-MAN,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP
SystemAdmin.SAM-HELP,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP
Automatic Reboot?: No
Status: General Release
Critical:
No (superseded patches were critical)
PHCO_32870: ABORT
This is critical as SAM gives a core dump in
the Auditing and Security -> Audited Events screen
as mentioned in the CR JAGaf75338.
PHCO_31820: ABORT
This is critical as SAM exits the current
functional area it is present at and reports a
coredump as mentioned in JAGae78372, JAGaf06223 and
JAGaf14390.
Category Tags:
defect_repair hardware_enablement enhancement
general_release critical halts_system manual_dependencies
Path Name: /hp-ux_patches/s700_800/11.X/PHCO_34974
Symptoms:
PHCO_34974:
JAGaf89974) SAM needs to support the new
RoHS PCI mux card.
JAGag00289) The response time of SAM's Disk
Devices sub-area under Disks and
File Systems is too long.
JAGag04946) SAM does not re-enable the print
spooler when multiple printers are
removed simultaneously.
JAGag24810) CPU clock frequency displayed by SAM
can differ from what is displayed by the
command /usr/contrib/bin/machinfo (currently
available on Integrity Servers only).
JAGag13171) While adding a user through SAM,
any directories in /etc/skel are
not copied.
JAGaf98895) SAM does not properly detect OnlineJFS
version 3.5 which comes with 11.23 0603
version.
JAGaf95076) SAM makes incorrect entries into the file
/etc/rc.config.d/auditing while enabling
auditing for login event.
JAGag11000) SAM doesn't display correct minimum MTU for
IGELAN driver.
JAGag10997) SAM doesn't display correct minimum MTU for
IETHER driver.
JAGag18919) SAM configures read-mostly file systems
incorrectly.
JAGaf94483) SAM is unable to parse the automounter files
properly.
JAGag30161) Network services in SAM shows ftp disabled
when ftp is enabled.
PHCO_34208:
JAGaf52052) SAM added a duplicate line to the /etc/ntp.conf
file in the following scenario:
A local clock is added from SAM -> Time -> NTP
Network Time Sources -> Actions -> Configure
NTP Local Clock and "Local Clock" is chosen.
The local clock is removed from Actions ->
Configure NTP Local Clock and "No clock" is
chosen and again the local clock is added.
JAGaf71084) On entering the SAM -> Disks and Filesystems
-> Filesystem subarea, SAM failed to parse the
master automounter file /etc/auto_master.
JAGaf79629) When trying to extend a filesystem with SAM and
OnlineJFS B.11.23.0505, the following error
message is displayed:
=============================================
Executing the following command:
\C/usr/sbin/vxlicense -p >/dev/null 2>&1 && (
/sbin/fs/vxfs/vxenablef | /usr/bin/fgrep -i
Full_VxFS )\C
Command completed with exit status 1.
=============================================
JAGaf89626) SAM needs to support EVA GL active/active arrays
which identify themselves as HSV101 and HSV111.
JAGaf91728) SAM does not warn users about temporary
passwords in trusted system.
JAGaf90309) SAM does not recognize VxFS4.1 file systems.
JAGaf96179) Previous 11iv2 patch PHCO_32870 is not DRD
friendly.
PHCO_32870:
JAGaf78558) SAM does not support HP StorageWorks MSA1000
storage device.
JAGaf34478) After the new user is added using SAM with
password option set to "Normal Behavior (No
Restrictions)" and password set to null, a new
user is forced to change the password when the
user logs on to the system.
JAGaf36625) In the ObAM description file
/usr/sam/lib/C/ts.ui, there is a nested
comment, which may result in a abnormal
termination of the trusted system subarea.
JAGaf48418) The samreg script kills processes other than
samd.
JAGaf55627) SAM cannot be used to configure auditing in the
standard mode.
JAGaf56145) The HP LTO448 tape drive reports itself to the
HP-UX operating system as "HP Ultrium 2-SCSI"
in response to the SCSI inquiry. SAM then
incorrectly reports the drive as "HP Ultrium
460 External Drive".
JAGaf60231) If the nodename and hostname are different, SAM
does not allow users to enter the "Hosts"
functional area, and does not even display a
warning message.
JAGaf67078) On entering the SAM -> Networking and
Communications -> Name Service Switch subarea,
on selecting the passwd service, and selecting
the Configure Name Service Switch action item,
the Configure Name Service Switch screen is
displayed. In that screen, on modifying the
"+/- Syntax", SAM does not update the
/etc/nsswitch.conf file properly.
JAGaf70085) On entering the SAM -> Networking and
Communications -> Name Service Switch subarea,
and while modifying the name service switch
settings for any service in the Configure Name
Service Switch screen, SAM does not display
the current settings of that service properly.
JAGaf73579) SAM's postinstall scripts remove files from
the filesystem.
JAGaf74254) SAM must be enhanced to support the XP12000
disk array.
JAGaf74406) On entering the SAM -> Printers and Plotters
subarea, SAM displays the following error
message and the printers are not listed in
SAM:
===========================================
An unexpected error has occurred retrieving
information about printers ...
===========================================
JAGaf74954) On entering the SAM -> Disks and File Systems
subarea each time, SAM leaves a temporary
device file transformer_dev in the /var/sam
directory when the HP-UX system is attached to
the transformer device.
JAGaf75335) SAM must be enhanced to support the VxVM
enclosure-based naming scheme.
JAGaf75336) SAM fails to extend the volume group while
vgextend(1m) succeeds.
JAGaf75338) On a trusted system, SAM dumps core in the
SAM -> Auditing and Security -> Audited
Events screen.
JAGaf76270) On entering the SAM -> Disks and File Systems
-> Disk Devices subarea, SAM does not correctly
detect multiple paths for EVA XL arrays.
JAGaf76271) SAM man pages are not clear about the
restricted SAM user's user and group
privileges.
PHCO_31926:
JAGaf37581) Enhance SAM to support configuration of IP
address and driver parameters for the
10GBASE-SR card in the SAM -> Networking and
Communications -> Network Interface Cards
subarea.
JAGaf37986) The sub-areas under SAM Auditing and Security's
Authenticated Commands functional area are not
accessible in 11.23.0409.
JAGaf42475) SAM does not support long hostname.
JAGaf51210) The Networking and Communications sub area of
SAM needs to support long hostname with length
upto 255 characters.
PHCO_31628:
JAGaf16710) The TUI feature for kernel configuration
functional area and "Cards and Devices" subarea
in the peripheral devices functional area is
not documented in the SAM manpage. Also, shadow
mode support from SAM "Users and Groups"
functional area is not documented in the sam.1m
manpage.
PHCO_31820:
JAGae78372) On entering "SAM -> Networking and
Communications -> Bootable Devices -> DHCP
Device Group Booting from this Server" subarea,
SAM exits with the following error message:
----------------------------------------------
UNEXPECTED EXIT: process LANG=C LC_ALL=C
/usr/sam/lbin/samx -c -n -p
4560 -s bootp_sa_dhcp_groups
/usr/sam/lib//boot.us exited with a non-
zero exit status.
sh: 4643 memory fault(coredump)
----------------------------------------------
When SAM is used to manage DHCP pools, one can
specify IP addresses or ranges of IP addresses
to exclude from the pool. The error message is
displayed if the exclusion list is more than
4096 bytes.
JAGae84402) Enhance SAM to support password aging and
account lifetime features in SAM -> Account for
Users and Groups -> Users area when the system
is shadow mode.
JAGae86120) When the FC60 LUNs report the world wide
identifier of NAA16 disks, SAM does not display
the number of paths and LUNs correctly in the
"SAM -> Disks and File Systems -> Disk Devices"
subarea.
JAGae89490) On a system with Securepath software installed,
"SAM -> Disk and FileSystems -> Disk Devices"
subarea does not display the number of paths
for EVA HSV110 disk array correctly.
JAGae98452) When the FC60 LUNs report the world wide
identifier of NAA16 disks, SAM does not display
the number of paths and LUNs correctly in the
"SAM -> Disks and File Systems -> Disk Devices"
subarea.
JAGae98694) On a system that has active and inactive volume
groups, creation of a new volume group, say
vgtest1, intermittently displays an error
message like:
-----------------------------------------------
vgcreate: Minor number of /dev/vgtest1/group is
not unique.
/dev/vgtest2/group has the same minor number.
-----------------------------------------------
JAGaf06223) On entering "SAM -> Networking and
Communications -> Hosts -> Local Hosts File"
subarea, SAM exits with the following error
message:
-----------------------------------------------
UNEXPECTED EXIT: process LANG=C LC_ALL=C
/usr/sam/lbin/samx -C -n -p 17908 -s
hosts_init_file /usr/sam/lib//hosts.ui exited
with a non-zero exit status.
sh:18025 Bus error(coredump).
-----------------------------------------------
JAGaf07880) SAM allows the GID of the special system group
"nogroup" to be modified in the following
scenario:
Enter "SAM -> Accounts For Users and groups
-> Groups" subarea and select the group
"nogroup". Choose the "Modify" menu item from
the "Actions" menu and change the value in the
field "Group Id".
JAGaf09893) When the ch_rc(1M) command encounters an
incomplete last line of a file, it removes one
character from the end of the line.
JAGaf10354) When SAM is used to convert a system into
trusted mode with the super user root having a
non-standard primary group, the files and
directories under the trusted database, "/tcb/"
are created with an inappropriate group.
JAGaf12788) SAM displays junk values against the "Configure
Aliases..." button in the "Modify Host in File"
screen. Also, SAM displays an empty "Configure
Aliases" screen on choosing the "Configure
Aliases" button in the following scenario:
Enter "SAM -> Networking and Communications
-> Hosts -> Local Hosts" subarea, select an
entry and choose the "Modify" menu item from
the "Actions" menu.
JAGaf12814) In the following scenarios, SAM does not behave
correctly in the "Accounts for Users and Groups"
functional area:
1. The "Create Home Directory" toggle is
displayed in the "Modify User" screen even
before the home directory entry is modified.
2. While removing a user (on a NIS system with 2
password files), the user's files can be re-
assigned to a user in the other repository.
3. While adding or modifying a user, duplicate
UIDs and Login names across repositories are not
detected on a NIS system with 2 password files.
JAGaf14390) On entering "SAM -> Disk and File systems
-> File systems" and "SAM -> Networking and
Communications -> Network File systems
-> Mounted Remote FileSystems" subareas, SAM
exits with a memory fault. This error occurs
if the size of the automounter map is larger
than 4096 bytes.
JAGaf14809) SAM incorrectly displays the value of the "Flow
Control" field for gelan, igelan and iether
cards as 'ON' in the following scenario:
Enter "SAM -> Networking and Communications
-> Network Interface Cards" subarea. Select an
gelan, igelan or iether card and select the
"Modify" menu item from the "Actions" menu. In
the "Configure LAN Card" screen, select the
"Advanced Options" button. In the "Advanced
Options" screen, set the "Flow Control" field
to OFF, exit the "Advanced Options" screen and
again go to the "Advanced Options" screen.
JAGaf15421) SAM does not allow modification of IP address
and host name in the SAM -> Networking and
Communications -> Hosts subarea.
JAGaf16820) On a system that supports HP OnLineJFS product,
SAM displays the same VxFS Mount Option for a
VxFS filesystem even after modifying the VxFS
mount option through SAM.
JAGaf17971) The following entry is logged in the
/var/adm/sw/swagent.log file while upgrading
upgrading from HP-UX 11.11 release to
HP-UX 11.23 release:
-----------------------------------------------
rm: //usr/sam/lbin/samd not removed.
Text file busy
-----------------------------------------------
JAGaf20017) For a VxFS filesystem, the VxFS Mount Options
visible through SAM should display the option
"Enable/Disable Synchronous-Write Data Logging"
only if HP OnLineJFS product is installed.
JAGaf20420) SAM incorrectly updates the file /etc/dhcptab
if the start and end address for an entry is
the same in the "Reserved Address in Address
Pool" screen in the following scenario:
Enter "SAM -> Networking and Communications
-> Bootable Devices -> DHCP Device Group
Booting from this Server" subarea, select the
"Add DHCP Group" menu item from the "Actions"
menu. In the "Add DHCP Group" screen, select
"Subnet Address Pool -> Reserved Address".
JAGaf22147) SAM must be enhanced to support Large send
feature for iether and igelan cards, and
Interrupt Throttling mode for iether cards.
JAGaf22501) SAM does not set "Force password change upon
next Login" option for user created using
user template with Password Option "Force
Password change upon next Login" when user's
password is NULL. Thus, user is not forced to
change password upon login.
JAGaf23716) The following message appears at the console
after upgrading from HP-UX 11.11 release to
HP-UX 11.23 release:
-----------------------------------------------
INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id:samd "/usr/sam/lbin/samd # system mgmt
daemon"
-----------------------------------------------
JAGaf27185) Enhance SAM to support Virtual LAN management
under SAM -> Networking and Communications.
JAGaf27341) SAM must not display VLAN(Virtual LAN)
interfaces under SAM -> Networking and
Communications-> Network Interface Cards area.
JAGaf26699) Restricted SAM does not operate correctly
when converting system to trusted mode.
JAGaf28870) The "System Properties" functional area of SAM
reports incorrect number of unique users
logged into the system.
JAGaf28881) On a system running in shadow mode, when
a user template created without "Enable
Password Aging" option is being modified,
the range displayed for "Password Expiration
Time" and "Minimum Time Between Password
Changes" is in weeks instead of days.
Also, when a user is added without
selecting "Set Password Option", the "Account
Lifetime" for that user is still being set.
JAGaf29531) SAM displays Speed, Duplex and Auto
negotiation fields in the Modify screen of IP
logical interfaces.
JAGaf30923) The online help of SAM -> Networking and
Communications -> Network Interface Cards
subarea does not capture the information that
while a user is modifying driver parameters for
an interface from SAM, the user must ensure that
IP parameters for that interface is also
configured.
JAGaf30154) The grep command fails while trying to grep
for an IP address from the output of
/usr/sam/lbin/laninfo command.
JAGaf31514) SAM does not display the Auto negotiation field
above Speed, and Duplex fields in the Configure
LAN Card screen of GELAN and IHV cards.
JAGaf32099) For an EVA disk array, SAM -> Disks and
FileSystems -> Disk Devices subarea displays
the alternate path to a disk as a separate
LUN if the device identifier bytes do not
match.
JAGaf32828) Support for enabling or disabling IPv6
tunneling in SAM -> Networking and
Communications -> Network Interface Cards
subarea must be removed.
JAGaf32861) In the following scenarios, SAM does not behave
correctly in the Accounts for Users and Groups
-> Users subarea when system is in shadow mode:
1. The Account Lifetime value is not displayed
in some cases while modifying a user.
2. Account Lifetime is being set in few cases,
even when it is cancelled, during addition
of a user.
PHCO_29666:
JAGaf01237) Enhance SAM to support the IPoIB LAN interface.
JAGaf10166) SAM does not create the SNAP interface in the
following scenario:
Enter the "SAM -> Networking and Communications
-> Network Interface Cards" subarea, select an
interface in disabled state and choose the
"Modify" menu item from the "Actions" menu.
Change the card type (for example,
"Fast Ethernet-Ethernet" to
"Fast Ethernet-SNAP802.3") and click OK.
JAGaf10167) SAM incorrectly updates the file /etc/hosts
with a duplicate IP address even though it
correctly displays an error in the following
scenario:
Enter "SAM -> Networking and Communications
-> Network Interface Cards" subarea, select
an interface; choose the "Modify" menu item
from the "Actions" menu, and enter the IP
address that is already assigned to
Hyperfabric adapter or Auto Port Aggregation
(APA).
Defect Description:
PHCO_34974:
JAGaf89974) SAM needs to support the new RoHS
PCI mux card which uses pci_mux1 driver.
Resolution: Now, SAM supports the new RoHS PCI
mux card which uses the driver pci_mux1.
JAGag00289) The response time of SAM's Disk
Devices sub-area under Disks and File
Systems is too long when connected to a
large Disk array configured with multiple
paths.
Resolution: The response time of SAM's Disk Devices
sub area has been improved by approximately
40 percent by using a better algorithm to
detect multiple paths.
JAGag04946) When using SAM to remove multiple
printers simultaneously, SAM does not re-enable
the print spooler when done.
Resolution: By removing the race condition which caused the
ambiguity, SAM now re-enables the print
spooler.
JAGag24810) CPU clock frequency displayed by SAM
can differ from what is displayed by the
command /usr/contrib/bin/machinfo (currently
available on Integrity Servers only). A Dual-
core Itanium 2 based machine has two
frequencies - ITC frequency
and Core frequency. Machinfo (1) was patched in
PHCO_33751 to display the Core frequency
instead of the ITC frequency whereas SAM was
displaying only the ITC frequency.
Resolution: SAM code has been modified to also display
the CPU Core frequency as reported by machinfo
(1) on machines that have
/usr/contrib/bin/machinfo installed.
JAGag13171) SAM fails to copy any directories in
/etc/skel because the program it uses
can only copy files.
Resolution: SAM code has been modified to copy both
files and directories from /etc/skel.
JAGaf98895) SAM does not properly detect OnlineJFS
version 3.5 which comes with 11.23 0603 version
because the test for detecting Online JFS 3.5
is incorrect.
Resolution: The command executed to verify that
Online JFS is licensed has been corrected.
JAGaf95076) SAM makes incorrect entries into the file
/etc/rc.config.d/auditing while enabling
auditing for login event for both Success and
Failure because logoff is not filtered out of
the output of the /usr/sbin/audevent command.
Resolution: SAM's code has been modified to filter out
logoff from the output of
the /usr/sbin/audevent command.
JAGag11000) IGELAN drivers are updated to support MTU as
low as 257 bytes instead of the 1024 minimum.
SAM needs to be updated to display the new
minimum.
Resolution: SAM code is modified to support the new minimum
value of MTU.
JAGag10997) IETHER drivers are updated to support MTU as
low as 257 bytes instead of the 1024 minimum.
SAM needs to be updated to display the new
minimum.
Resolution: SAM code is modified to support the new minimum
value of MTU.
JAGag18919) SAM configures read-mostly file systems
incorrectly. When there is an entry in
both read-write list and read-only list
of export file systems, SAM removes
the entry from read-only list.
Resolution: SAM code is modified to keep the existing
entries in both the lists.
JAGaf94483) SAM is unable to parse the automounter
files properly when a single line
information is typed in two lines with "\"
followed by whitespace at the end of
first line.
Resolution: SAM code is modified to handle the scenario
if whitespace characters are present between
"\" and new line character.
JAGag30161) Network services in SAM shows ftp
disabled if ftp is enabled when
ftp-data port is not specified in the
/etc/services file.
Resolution: SAM code is modified to handle this
scenario (ftp-data port is disabled)
to describe the status.
PHCO_34208:
JAGaf52052) SAM adds a duplicate line to the /etc/ntp.conf
file in the following scenario:
A local clock is added from SAM -> Time -> NTP
Network Time Sources -> Actions -> Configure
NTP Local Clock and "Local Clock" is chosen.
The local clock is removed from Actions ->
Configure NTP Local Clock and "No clock" is
chosen and again the local clock is added.
Resolution: Now, SAM does not add a duplicate line to the
/etc/ntp.conf file when a local is added,
removed and added again.
JAGaf71084) SAM failed to parse the master automounter file
/etc/auto_master because SAM could not parse
numerically named file systems.
Resolution: SAM code has been modified and it now parses
the master automounter file properly.
JAGaf79629) SAM is not calling the right licence detection
command from the right directory location
regardless of whether VxFS version is 3.5 or
4.1.
Resolution: Now, SAM extends the file system properly with
OnlineJFS B.11.23.05.05.
JAGaf89626) SAM needs to support EVA GL active/active arrays
which identify themselves as HSV101 and HSV111
drivers.
Resolution: Now, SAM supports EVA GL (EVA3000/EVA5000)
active/active arrays.
JAGaf91728) SAM does not warn users about temporary
passwords in trusted system due to insufficient
SAM documentation and warnings.
Resolution: SAM code has been modified to display warning
messages to users about temporary passwords.
SAM online help system has also been updated.
JAGaf90309) SAM does not recognize VxFS4.1 file systems.
Resolution: Now, SAM recognizes VxFs4.1 file systems.
JAGaf96179) Previous 11iv2 patch PHCO_32870 is not DRD
friendly. If another SAM application is
running, then the DRD installation of the SAM
patch does not proceed.
Resolution: In the checkinstall and checkremove script, a
condition has been added to check if it is a
DRD installation, Now the contents of the
script are executed only if it is not a
DRD install.
PHCO_32870:
JAGaf78558) SAM has no support for MSA1000 disk array and
consequently the disk array LUNs with
multipaths are incorrectly displayed.
Resolution: SAM is modified to support MSA1000.
JAGaf34478) When a user created with a null password and
password options set to "Normal Behaviour" logs
into the system, the following message is
emitted:
============================================
Your password has expired. Choose a new one
Changing password for user1
New password:
============================================
Resolution: SAM has been modified such that a new user is
not forced to change the password after a new
user is added with password option set to
"Normal Behavior (No Restrictions)" and
password set to null.
JAGaf36625) In the ObAM description file
/usr/sam/lib/C/ts.ui, there is a nested
comment, which may result in a abnormal
termination of the trusted system subarea.
Resolution: The nested comment has been fixed in the
ObAM description file /usr/sam/lib/C/ts.ui.
JAGaf48418) The samreg script matches any string containing
"samd" and kills other programs.
Resolution: The samreg script has been modified such that
only the samd process is killed.
JAGaf55627) As user cannot use aud* commands in standard
mode, SAM cannot be used to configure auditing
in the standard mode.
Resolution: SAM has been modified such that if the
TrustedMigration product is installed, users
can configure auditing in the standard mode for
Audited Events and Audited System Calls.
When the system is converted into standard mode
from trusted, the location of the audit logs
will be lost. Also the audit log data is lost
if the audit logs are located in the
"/.secure" directory. If TrustedMigration
Product is installed, Auditing can be restored
on the system by reconfiguring audit log
parameters and turning auditing on again after
conversion.
JAGaf56145) SAM incorrectly reports the LTO 448 tape drive
because the description string that SAM
displays for LTO 448 tape drive is not unique.
Resolution: SAM displays the LTO 448 tape drive correctly.
JAGaf60231) If the hostname and nodename are different in
the system, SAM does not allow the user to
enter the Hosts functional area until both
are same.
Resolution: SAM now displays a warning message and allows
the user to enter the Hosts functional area.
JAGaf67078) The 'passwd: compat' option was entered
correctly in the /etc/nsswitch.conf file by SAM
but there was another syntax added to the file,
which was incorrect, and locked out the local
users from logging in.
Resolution: SAM updates the /etc/nsswitch.conf file
properly.
JAGaf70085) In the Name Service Switch subarea, on
selecting a service and entering the "Configure
Name Service Switch..." screen, the search order
selections displayed do not reflect the current
settings stored for that service in the
/etc/nsswitch.conf file.
Resolution: SAM has been modified to display the search
order selections properly in the "Configure
Name Service Switch..." screen for any service.
JAGaf73579) SAM's postinstall scripts remove files from
the filesystem.
Resolution: SAM's postinstall scripts do not remove files
from the filesystem.
JAGaf74254) SAM must be enhanced to support the XP12000
disk array.
Resolution: SAM has been enhanced to support the XP12000
disk array.
JAGaf74406) SAM displays an error message in the Printers
and Plotters subarea and does not display
printers if a printer is disabled with a -r
option.
Resolution: SAM displays all the printers even if a printer
is disabled with a -r option.
JAGaf74954) On a HP-UX 11.23 v1 superdome system with EMC
8530 disk array attached, and HP StorageWorks
DS2300 (A6490AZ) installed, a temporary device
file transformer_dev is not removed by SAM in
the /var/sam directory.
Resolution: SAM cleans up the temporary transformer
device file on exiting the SAM -> Disks
and File Systems subarea when the HP-UX
system is attached to the transformer device.
JAGaf75335) When using VxVM 3.5, changing the naming
scheme for disks to "enclosure based names"
using the vxdiskadm command option 20 causes
SAM -> Disks and Filesystems area to display
the following error message for each disk:
=============================================
NOTE The Logical Volume Manager shows this
device file, /dev/dsk/Disk_0, with hardware
path, , as belonging to Volume Group, rootdg.
SAM has determined that this hardware path is
not currently active because either the device
is disconnected, or this is not the primary
path to a multiple path physical volume.
==============================================
Resolution: SAM has been enhanced to support VxVM
enclosure-based naming scheme.
JAGaf75336) SAM fails to extend the volume group while
vgextend(1m) succeeds.
Resolution: SAM extends the volume group properly.
JAGaf75338) On a trusted system, SAM dumps core in the
SAM -> Auditing and Security -> Audited
Events screen. Change the open event to
"Audit for Success Only" and change all other
event types to "Audit Neither Success nor
Failure". Go to the "List" menu item change to
"Audited System Calls change execv and execve
to "Audit Both Success and Failure". Go to the
"List" menu item and change to "Audited
Events". The following error message is
displayed:
==============================================
UNEXPECTED EXIT: process LANG=C LC_ALL=C
/usr/sam/lbin/samx -C -p 9538 -s ts_events
/usr/sam/lib//ts.ui exited with a non-zero exit
status.
sh: 9643 Bus error(coredump)
===============================================
Resolution: On a trusted system, SAM works properly in the
SAM -> Auditing and Security -> Audited Events
screen.
JAGaf76270) The Disk Devices screen of SAM incorrectly
collapses LUNs of EVA XL arrays like EVA 4000/
6000.
Resolution: SAM has been changed to correctly detect
all paths for EVA XL arrays.
JAGaf76271) On invoking the "sam -f user_name" command,
where the user "user_name" belongs to a
secondary group that has restricted SAM
privileges, the following error message is
displayed:
===============================================
Could not read the contents of the control file
"/etc/sam/custom/<username>.cf".
===============================================
Resolution: SAM man pages have been modified to correctly
advise how to grant restricted SAM privileges.
PHCO_31926:
JAGaf37581) SAM does not support configuration of IP
address and driver parameters for the
10GBASE-SR card in the SAM -> Networking and
Communications -> Network Interface Cards
subarea.
Resolution: SAM has been enhanced to support the
configuration of IP address and driver
parameters for the 10GBASE-SR card in the
SAM -> Networking and Communications -> Network
Interface Cards subarea.
JAGaf37986) Upon entering SAM -> Auditing and Security ->
Authenticated Commands area and selecting any
of the subareas under it, the following message
is displayed:
"Check the PAM configuration file for
errors..."
Upon pressing OK, the following error message is
displayed:
"At least one entry in the PAM configuration
file (/etc/pam.conf) is invalid. The format for
each entry is:
The command, auth type, control flag and module
fields are all required; the module options
field is optional. Check the SAM log to
determine which PAM configuration file entries
are not valid.
These entries must be corrected or removed
before SAM can be used to manage the file."
Resolution: SAM has been modified to recognize the pam_hpsec
(5) entries.
JAGaf42475) SAM functional areas "Backup and
Recovery", "Printers and Plotters", "Routine
Tasks" and "Performance Monitors -> System
Properties" subarea and samlog_viewer(1) do not
support long hostname.
Resolution: SAM has been modified to support long hostname.
However, due to some system limitations, SAM
truncates the hostname displayed on the title
bars of windows it creates.
JAGaf51210) The Networking and Communications sub area of
SAM does not support long hostname with length
upto 255 characters.
Resolution: The Networking and Communications sub area of
SAM supports long hostname with length upto 255
characters. However, the SNAplus2 Installation
area,the APA area, the HyperFabric area, the
X.25 PAD Services area, and the support for
X.25 and ATM interfaces from the Network
Interface Cards area does not support long
hostname with length upto 255 characters.
PHCO_31628:
JAGaf16710) The TUI feature for kernel configuration
functional area and "Cards and Devices" subarea
in the peripheral devices functional area needs
to be documented in the SAM manpage.
Also, shadow mode support from SAM "Users and
Groups" functional area needs to be documented
in the sam.1m manpage.
Resolution: SAM manpage has been updated to document the
TUI feature for kernel configuration functional
area and "Cards and Devices" subarea in the
peripheral devices functional area. Also,
shadow mode support from SAM "Users and Groups"
functional area is documented in the sam.1m
manpage.
PHCO_31820:
JAGae78372) On entering "SAM-> Networking and
Communications -> Bootable Devices -> DHCP
Device Groups Booting From this Server"
subarea, select the desktops' DHCP Group Name
that is listed, choose the Modify menu item
and click the OK button. If the size of an
entry in the file /etc/dhcptab is more than 4K
(4096 bytes), SAM exits with a memory fault due
to an error in the memory management routine.
Resolution: SAM is modified to handle large /etc/dhcptab
files upto 32768 bytes.
JAGae84402) On entering any area under SAM-> Accounts for
Users and Groups, SAM detects the existence of
/etc/shadow file and displays a message that
shadow mode is not supported. It is not able to
utilize the password aging information present
in /etc/shadow to display and manage the
password aging parameters of a user.
Resolution: SAM has been enhanced to support and manage two
new password aging features present in the
shadow(4) file, /etc/shadow, namely the
warn days and expiration.
JAGae86120) SAM collapses the FC60 LUNs if the LUNs report
the worldwide identifier in Name Address
Authority (NAA) IEEE registered extended
format. The information displayed in the "SAM
-> Disk Devices" screen does not match with the
output of the command /opt/hparray/bin/amdsp -l
Resolution: Now, the FC60 LUNs having the NAA worldwide
identifier are displayed in the SAM -> Disk
Devices screen and the information about the
FC60 LUNs matches with the output of the
command /opt/hparray/bin/amdsp -l.
JAGae89490) On a system with Securepath software installed,
"SAM -> Disk and FileSystems -> Disk Devices"
subarea does not compute the number of paths
for EVA HSV110 disk array correctly.
Resolution: SAM code has been modified to compute the
number of paths for EVA HSV110 disk array
correctly.
JAGae98452) The information about FC60 LUNs shown in the
SAM Disk Devices screen does not match with the
output of /opt/hparray/bin/amdsp -l < serial
number of the FC60 array> command.
Resolution: The information about FC60 LUNs shown in the
SAM Disk Devices screen matches with the output
of /opt/hparray/bin/amdsp -l < FC60 disk array
serial number> command
JAGae98694) SAM uses incorrect parser to obtain a non-
activated volume group information. SAM
incorrectly detects the minor number assigned
to the volume group, vgtest2, as free and uses
it to create the group file for vgtest1. Later,
vgcreate detects the duplicate minor number and
displays the error message.
Resolution: The parsing method in SAM to obtain the
inactive volume group information has been
corrected.
JAGaf06223) On entering "SAM -> Networking and
Communications -> Hosts -> Local Hosts File"
subarea, SAM exits with a memory fault. The
error occurs when /etc/hosts file is larger
than 4096 bytes.
Resolution: SAM is modified to handle large /etc/hosts
files upto 32768 bytes.
JAGaf07880) SAM does not check if the GID to be modified
belongs to the special system group "no group".
Resolution: SAM has been modified to disallow modification
of the GID for a special system group "no
group".
JAGaf09893) If a file has an incomplete last line,
ch_rc(1M) corrupts the contents of the file by
removing one character from the end of the line
Resolution: ch_rc(1M) command does not corrupt the contents
of the file by removing one character from the
end of the line.
JAGaf10354) SAM does not check the primary group of
superuser root during initialization and as a
result, files and directories are created with
the non-standard effective group when
converting a system to trusted mode.
Resolution: SAM has been modified to provide an option to
the user, before the functional area launcher
is displayed, to either change the group to
"sys" which is the standard primary group for
root or proceed with the current non-standard
group for root.
JAGaf12788) SAM is not updating the value for number of
configured hostname aliases correctly. As a
result, a junk value is displayed. Since the
value for the number of configured hostname
aliases is not correct, SAM fails to display
the configured hostname aliases.
Resolution: SAM correctly updates the value for number of
configured aliases.
JAGaf12814) In the following scenarios, SAM does not behave
correctly in the "Accounts for Users and
Groups" functional area:
1. On entering SAM -> Accounts for Users and
Groups functional area, and on choosing one of
the subareas (Users, Local Users, NIS Users),
the "Create Home Directory" toggle appears even
before the home directory entry is changed
while modifying a user.
2. When a Local user or NIS User (in NIS with 2
password files) is being removed, the user's
files could be re-assigned to either Local or
NIS users. The re-assignment must not be
allowed across repositories.
3. Duplicate UID and Login name check is not
being done across repositories while adding or
modifying a user on a NIS system with 2
password files.
Resolution: Now, SAM behaves correctly in the "Accounts for
Users and Groups" functional area in the
following scenarios:
1. The "Create Home Directory" toggle appears
only if the home directory entry is changed
while modifying a user.
2. While removing a user from a NIS system with
2 password files, re-assignment of files only
to a user in the same repository is allowed.
3. Duplicate UID and Login name check is done
across repositories while adding or modifying a
user on a NIS system with 2 password files.
JAGaf14390) Enter "SAM -> Disk and File systems -> File
systems" subarea or "SAM -> Networking and
Communications -> Network File systems
-> Mounted Remote FileSystems" subareas. If
the size of the automounter map is larger than
4096 bytes, SAM exits with a memory fault.
Resolution: SAM is modified to handle large automounter
entries upto 32768 bytes.
JAGaf14809) The checking condition to find out the value
of the Flow control field for gelan, igelan and
iether cards are incorrect. The Flow control
value is wrongly displayed on the "Advanced
Options" screen of gelan, igelan and iether
cards.
Resolution: SAM has been modified to correctly display the
value of the "Flow control" field for gelan,
igelan and iether cards.
JAGaf15421) The Modify screen does not allow modification
of IP address and host name in the SAM ->
Networking and Communications -> Hosts subarea.
Resolution: The Modify screen allows modification of IP
address and host name in the SAM -> Networking
and Communications -> Hosts subarea.
JAGaf16820) SAM used an incorrect parsing algorithm to
detect the VxFS mount options of a VxFS file
system and displayed a wrong highlighted option
while modifying the mount options of such a
file system in a system that supported HP
OnLineJFS.
Resolution: The parsing algorithm in SAM has been corrected
to detect the correct VxFS mount options of a
file system that uses HP OnLineJFS.
JAGaf17971) The file /usr/sam/lbin/samd is obsolete in HP-UX
11.23. The associated daemon samd is not
stopped before removing the file.
Resolution: The daemon samd is stopped before removing the
file /usr/sam/lbin/samd.
JAGaf20017) SAM displayed the "Enable/Disable Synchronous-
Write Data Logging" VxFS mount option without
first checking if HP OnLineJFS product is
installed completely on the system along with
its required licenses.
Resolution: SAM now checks if the HP OnLineJFS is installed
on the system and has valid licenses before
displaying the "Enable/Disable Synchronous-
Write Data Logging" mount option for a VxFS
file system.
JAGaf20420) SAM does not check the start and end address
before updating the /etc/dhcptab file.
Resolution: Now, SAM checks the start and end address
before updating the /etc/dhcptab file.
JAGaf22147) In the SAM -> Networking and Communications ->
Network Interface Cards subarea, SAM needs to
be enhanced to support the Large send feature
for iether and igelan cards, and Interrupt
Throttling mode for iether cards.
Resolution: SAM has been enhanced to support the Large send
feature for iether and igelan cards, and
Interrupt Throttling mode for iether cards in
the SAM -> Networking and Communications ->
Network Interface Cards subarea.
JAGaf22501) Enter SAM-> Accounts for Users and Groups ->
Users subarea . Create a User template with
Password option "Force Password Change upon
Next Login". Select this User Template as the
current template. Add a user using this
template with NULL password. Login as the
newly created user on the system. The user is
not asked to change password upon Login.
Resolution: Now, SAM sets "Force password change upon
next Login" option for user created using
user templates with Password Option "Force
Password change upon next Login" when user's
password is NULL. The user is forced to
change his/her password upon login.
JAGaf23716) The file /usr/sam/lbin/samd is obsolete in
HP-UX 11.23 release. After the upgrade
from HP-UX 11.11 release to HP-UX 11.23
release, the samd daemon is not killed
and the associated samd daemon entry is not
removed from the etc/inittab file.
Resolution: SAM now stops the samd daemon and removes the
samd entry from the file /etc/inittab before
removing the file /usr/sam/lbin/samd.
JAGaf27185) SAM-NNC was not supporting configuration of
VLAN interface.
Resolution: SAM has been modified to support the
configuration of VLAN interfaces.
JAGaf27341) SAM does not check if a network interface is a
VLAN interface before displaying it in
SAM -> Networking and Communications -> Network
Interface Cards area.
Resolution: SAM does not display any VLAN interface under
SAM -> Networking and Communications -> Network
Interface Cards area.
JAGaf26699) When restricted SAM user is converting a system
to trusted mode, the trusted database files are
created with improper permissions.
Resolution: Restricted SAM has been modified so that the
trusted database files are created with the
correct permissions.
JAGaf28870) The number of unique users logged into the
system is reported incorrectly on entering
SAM->System Properties->Operating System.
Resolution: SAM has been modified to display the correct
number of unique users logged into the system
in the "System Properties" functional area.
JAGaf28881) SAM is not properly converting the range
for "Password Expiration Time" and "Minimum
Time Between Password Changes" into days for
all cases and SAM is not initializing the
"Account Life Time" correctly.
Resolution: SAM has been modified to display the range for
the parameters in days while in shadow mode for
all cases and to initialize the "Account Life
Time" correctly.
JAGaf29531) On entering SAM ->Networking and Communications
->Network Interface Cards subarea and
selecting an IP logical interface and
performing the "Modify" action, the fields
Speed, Duplex and Auto Negotiation are
displayed in the Modify screen of IP logical
interface. SAM should not display these fields.
Resolution: Now, SAM does not display Speed, Duplex and
Auto negotiation fields in the Modify screen of
IP logical interfaces.
JAGaf30923) The online help of SAM -> Networking and
Communications ->Network Interface Cards subarea
needs to be updated to capture the information
that while a user is modifying driver parameters
for an interface from SAM, the user must ensure
that IP parameters for that interface is also
configured.
Resolution: The online help of SAM -> Networking and
Communications ->Network Interface Cards subarea
has been updated to capture the information that
while a user is modifying driver parameters for
an interface from SAM, the user must ensure that
IP parameters for that interface is also
configured.
JAGaf30154) When an attempt is made to grep for an IP
address from the output of
/usr/sam/lbin/laninfo command, the grep
command fails.
Resolution: Now, users can grep for an IP address from
the output of /usr/sam/lbin/laninfo command.
JAGaf31514) In the SAM ->Networking and Communications->
Network Interface Cards subarea, select a GELAN
or IHV interface and select Configure/Modify
action item. In the "Configure LAN Card" screen,
SAM must display the Auto Negotiation field
above Speed, and Duplex fields.
JAGaf32099) For an EVA disk array, SAM -> Disks and
FileSystems -> Disk Devices subarea displays
the alternate path to a disk as a separate
LUN if the device identifier bytes returned
by ioscan(1M) do not match.
Resolution: For the EVA disk array, the alternate paths
to a disk are correctly recognized even
if the device identifier bytes do not match.
JAGaf32828) SAM must remove support for enabling or
disabling IPv6 tunneling in SAM -> Networking
and Communications -> Network Interface Cards
subarea.
Resolution: SAM support for enabling or disabling IPv6
tunneling in SAM -> Networking and
Communications -> Network Interface Cards
area is removed.
JAGaf32861) In the following scenarios, SAM does not
behave correctly in the Accounts for Users
and Groups -> Users subarea when system is in
shadow mode:
1. Go to Actions -> Add. Create an user with
Account Lifetime value set. Modify the user
details . Enter [Modify Password Option] and
change account lifetime value and click OK.
Enter the task dialog again by clicking on
[Modify Password Options]. The Lifetime set
is not displayed; instead Lifetime shows
selection "None (Infinite)".
2. Go to Actions -> Add. Enter [Set Password
Option] and specify the Lifetime. Click OK.
Re-enter the password aging task dialog.
Click cancel. Add the user. The lifetime
is being set for that user.
Resolution: Now, SAM behaves correctly in the Accounts for
Users and Groups-> Users subarea when system
is in shadow mode in the following scenarios:
1. Account Lifetime is being displayed
correctly in all cases while a user is
being modified.
2. Account Lifetime is not being set when it
is cancelled during addition of user.
PHCO_29666:
JAGaf01237) SAM must be enhanced to support the IPoIB LAN
interface.
Resolution: SAM has been modified to support the IPoIB LAN
interface.
JAGaf10166) SAM calls the "ifconfig" command only when IP
parameters are modified in the
"Configure/Modify" screen. As a result, when
the card type is changed to create the SNAP
interface, SAM does not call the "ifconfig"
command and the SNAP interface is not created.
Resolution: SAM has been modified to call the "ifconfig"
command when the card type is changed, now the
SNAP interface is created successfully.
JAGaf10167) SAM checks for duplicate IP address before
setting the IP address for an interface in the
"Network Interface Cards" subarea . This
check does not cover Hyperfabric adapter,
and APA areas. As a result, SAM updates the
file /etc/hosts with wrong entries.
Resolution: SAM checks for duplicate IP address
in Hyperfabric adapter and APA areas.
As a result, SAM prevents incorrect
updates to the file /etc/hosts.
Enhancement:
Yes
PHCO_34974:
This patch provides 5 enhancements:
1- improved performance of the disk devices sub area
when the machine is configured with multiple paths
2- support for PCI mux cards using the pci_mux1 driver
3- display of CPU Core frequency as reported by
/usr/contrib/bin/machinfo if the latter is installed
on the system
4- support for the new minimum MTU value for the IETHER
driver
5- support for the new minimum MTU value for the IGELAN
driver.
PHCO_34208:
This is an enhancement to support EVA disk arrays
which identify themselves as HSV101 and HSV111.
PHCO_32870:
This patch has an enhancement to support Auditing
in Standard mode.
PHCO_31926:
This is an enhancement to support
configuration of IP address and driver parameters
for the 10GBASE-SR card. The patch also provides support
for long hostname and uname.
PHCO_29666:
This patch delivers new functionality for
configuration and management of network parameters
for IPoIB interfaces.
SR:
8606340318 8606349345 8606349346 8606315649 8606321934
8606323655 8606327229 8606337445 8606337688 8606345373
8606347056 8606349074 8606349538 8606351983 8606352009
8606353596 8606354015 8606354648 8606356114 8606357271
8606359321 8606359724 8606361457 8606361821 8606363053
8606366621 8606366777 8606366070 8606368308 8606368319
8606368987 8606370501 8606369610 8606371096 8606371681
8606372422 8606372455 8606356004 8606377303 8606377723
8606382264 8606391065 8606415100 8606374091 8606376348
8606388267 8606415481 8606415482 8606414395 8606396153
8606415484 8606395618 8606407172 8606400275 8606410203
8606413719 8606414548 8606416419 8606416420 8606418728
8606391920 8606411202 8606419799 8606430167 8606432286
8606430863 8606438063 8606430515 8606442537 8606447619
8606469623 8606456790 8606441142 8606436829 8606454348
8606454345 8606463117 8606436177 8606475848
Patch Files:
InternetSrvcs.INETSVCS-BOOT,fr=B.11.23,
fa=HP-UX_B.11.23_IA/PA,v=HP:
/usr/sbin/setup_bootp
/usr/sbin/setup_tftp
OS-Core.UX-CORE,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP:
/usr/sbin/ch_rc
SystemAdmin.SAM,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP:
/usr/newconfig/etc/sam/reg_da.db
/usr/newconfig/etc/sam/reg_files.db
/usr/newconfig/etc/sam/reg_tm.db
/usr/newconfig/var/sam/ts/pam_mod.reg
/usr/sam/bin/chdhcptab
/usr/sam/bin/samlog_viewer
/usr/sam/bin/samreg
/usr/sam/lbin/autoopt
/usr/sam/lbin/ch_hostip
/usr/sam/lbin/ch_rhosts
/usr/sam/lbin/ch_xntp
/usr/sam/lbin/chuidacl
/usr/sam/lbin/clrlockdcache
/usr/sam/lbin/dareg
/usr/sam/lbin/get_gr_mems
/usr/sam/lbin/get_sdm_info
/usr/sam/lbin/get_ttydevs
/usr/sam/lbin/ioparser.sh
/usr/sam/lbin/ipconn_load
/usr/sam/lbin/laninfo
/usr/sam/lbin/lp_rd_pstatus
/usr/sam/lbin/lpmgr
/usr/sam/lbin/mkterm.sh
/usr/sam/lbin/nnc_utils
/usr/sam/lbin/pd_ups_parse
/usr/sam/lbin/rsam
/usr/sam/lbin/samx
/usr/sam/lbin/tmgrx
/usr/sam/lbin/tmreg
/usr/sam/lbin/ug_area_vis
/usr/sam/lbin/upgrpfiles
/usr/sam/lbin/upusrfiles
/usr/sam/lbin/vginfo
/usr/sam/lbin/vlaninfo
/usr/sam/lib/C/arch.cat
/usr/sam/lib/C/boot.ui
/usr/sam/lib/C/br.ui
/usr/sam/lib/C/dhcpv6.ui
/usr/sam/lib/C/dns.ui
/usr/sam/lib/C/fal.cat
/usr/sam/lib/C/fs.cat
/usr/sam/lib/C/fs.ui
/usr/sam/lib/C/fs_vg.h
/usr/sam/lib/C/hosts.ui
/usr/sam/lib/C/lfv.ui
/usr/sam/lib/C/lp.ui
/usr/sam/lib/C/mo.cat
/usr/sam/lib/C/netg.ui
/usr/sam/lib/C/nfs_netg.ui
/usr/sam/lib/C/nfs_td.ui
/usr/sam/lib/C/nia.ui
/usr/sam/lib/C/nis.ui
/usr/sam/lib/C/nisp.ui
/usr/sam/lib/C/nisp_2.ui
/usr/sam/lib/C/nnc_alias.ui
/usr/sam/lib/C/nnc_setparm.ui
/usr/sam/lib/C/nntp.ui
/usr/sam/lib/C/nsswitch.ui
/usr/sam/lib/C/pd.cat
/usr/sam/lib/C/pd_devinfo.tx
/usr/sam/lib/C/pd_dfinfo.tx
/usr/sam/lib/C/pd_scr.cat
/usr/sam/lib/C/rt.ui
/usr/sam/lib/C/sam.cb
/usr/sam/lib/C/sam.ui
/usr/sam/lib/C/security.ui
/usr/sam/lib/C/sysname_td.ui
/usr/sam/lib/C/ts.cat
/usr/sam/lib/C/ts.ui
/usr/sam/lib/C/ug.cat
/usr/sam/lib/C/ug.ui
/usr/sam/lib/C/ug.ut.ui
/usr/sam/lib/C/vlan.ui
/usr/sam/lib/C/vlan_tasks.ui
/usr/sam/lib/fal/fal.sl
/usr/sam/lib/fal/fal.tm
/usr/sam/lib/fs/fs.da
/usr/sam/lib/fs/fs.sl
/usr/sam/lib/fs/fs.tm
/usr/sam/lib/fs/fs_com.sl
/usr/sam/lib/libcom.sl
/usr/sam/lib/liblog.sl
/usr/sam/lib/libsam.sl
/usr/sam/lib/lp/lp.sl
/usr/sam/lib/mo/mo.da
/usr/sam/lib/mo/mo.sl
/usr/sam/lib/mo/mo.tm
/usr/sam/lib/nnc/boot.sl
/usr/sam/lib/nnc/nnc.da
/usr/sam/lib/nnc/nnc.sl
/usr/sam/lib/nnc/nnc.tm
/usr/sam/lib/nnc/nnc_da_com.sl
/usr/sam/lib/pd/pd.sl
/usr/sam/lib/pd/pd.tm
/usr/sam/lib/pd/pd_comlib.sl
/usr/sam/lib/rt/rt.sl
/usr/sam/lib/rt/rt.tm
/usr/sam/lib/tm/tm_comlib.sl
/usr/sam/lib/ts/ts.sl
/usr/sam/lib/ts/ts.tm
/usr/sam/lib/ug/ug.da
/usr/sam/lib/ug/ug.sl
/usr/sam/lib/ug/ug.tm
/usr/sam/lib/ug/ug_comlib.sl
SystemAdmin.SAM-ENG-A-MAN,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,
v=HP:
/usr/share/man/man1m.Z/sam.1m
SystemAdmin.SAM-HELP,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP:
/usr/sam/help/C/FALtut.WhatsNewInSAM.sdl
/usr/sam/help/C/FStd.VxFSoptions.sdl
/usr/sam/help/C/PERF_MONtd.SystemProperties.sdl
/usr/sam/help/C/TSactions.AllSubareas.sdl
/usr/sam/help/C/UGUTtd.CreatNonTrstUsrTmplt.sdl
/usr/sam/help/C/UGUTtd.ModifyUserTemplate.sdl
/usr/sam/help/C/UGUTtd.PasswdSpecification.sdl
/usr/sam/help/C/UGfal.IconHelp.sdl
/usr/sam/help/C/UGole.LocalUsers.sdl
/usr/sam/help/C/UGole.NISplusUsers.sdl
/usr/sam/help/C/UGole.NISusers.sdl
/usr/sam/help/C/UGole.Users.sdl
/usr/sam/help/C/UGtd.AddNewUserAccount.sdl
/usr/sam/help/C/UGtd.ModifyUserAccount.sdl
/usr/sam/help/C/UGtd.PasswordOptsNonTrusted.sdl
/usr/sam/help/C/UGtd.RemoveUser.sdl
/usr/sam/help/C/UGtut.ManagingNISusers.sdl
/usr/sam/help/C/UGtut.Users.sdl
/usr/sam/help/C/nnc/nnc.sdl
/usr/sam/help/ja_JP.SJIS/FALtut.WhatsNewInSAM.sdl
/usr/sam/help/ja_JP.SJIS/FStd.VxFSoptions.sdl
/usr/sam/help/ja_JP.SJIS/UGUTtd.CreatNonTrstUsrTmplt.sdl
/usr/sam/help/ja_JP.SJIS/UGUTtd.ModifyUserTemplate.sdl
/usr/sam/help/ja_JP.SJIS/UGUTtd.PasswdSpecification.sdl
/usr/sam/help/ja_JP.SJIS/UGfal.IconHelp.sdl
/usr/sam/help/ja_JP.SJIS/UGole.LocalUsers.sdl
/usr/sam/help/ja_JP.SJIS/UGole.NISplusUsers.sdl
/usr/sam/help/ja_JP.SJIS/UGole.NISusers.sdl
/usr/sam/help/ja_JP.SJIS/UGole.Users.sdl
/usr/sam/help/ja_JP.SJIS/UGtd.AddNewUserAccount.sdl
/usr/sam/help/ja_JP.SJIS/UGtd.ModifyUserAccount.sdl
/usr/sam/help/ja_JP.SJIS/UGtd.PasswordOptsNonTrusted.sdl
/usr/sam/help/ja_JP.SJIS/UGtd.RemoveUser.sdl
/usr/sam/help/ja_JP.SJIS/UGtut.ManagingNISusers.sdl
/usr/sam/help/ja_JP.SJIS/UGtut.Users.sdl
/usr/sam/help/ja_JP.eucJP/FALtut.WhatsNewInSAM.sdl
/usr/sam/help/ja_JP.eucJP/FStd.VxFSoptions.sdl
/usr/sam/help/ja_JP.eucJP/UGUTtd.CreatNonTrstUsrTmplt.sdl
/usr/sam/help/ja_JP.eucJP/UGUTtd.ModifyUserTemplate.sdl
/usr/sam/help/ja_JP.eucJP/UGUTtd.PasswdSpecification.sdl
/usr/sam/help/ja_JP.eucJP/UGfal.IconHelp.sdl
/usr/sam/help/ja_JP.eucJP/UGole.LocalUsers.sdl
/usr/sam/help/ja_JP.eucJP/UGole.NISplusUsers.sdl
/usr/sam/help/ja_JP.eucJP/UGole.NISusers.sdl
/usr/sam/help/ja_JP.eucJP/UGole.Users.sdl
/usr/sam/help/ja_JP.eucJP/UGtd.AddNewUserAccount.sdl
/usr/sam/help/ja_JP.eucJP/UGtd.ModifyUserAccount.sdl
/usr/sam/help/ja_JP.eucJP/UGtd.PasswordOptsNonTrusted.sdl
/usr/sam/help/ja_JP.eucJP/UGtd.RemoveUser.sdl
/usr/sam/help/ja_JP.eucJP/UGtut.ManagingNISusers.sdl
/usr/sam/help/ja_JP.eucJP/UGtut.Users.sdl
what(1) Output:
InternetSrvcs.INETSVCS-BOOT,fr=B.11.23,
fa=HP-UX_B.11.23_IA/PA,v=HP:
/usr/sbin/setup_bootp:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 73.2 $
SAM file editing library $Revision: 72.2 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sbin/setup_tftp:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 73.2 $
SAM file editing library $Revision: 72.2 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
OS-Core.UX-CORE,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP:
/usr/sbin/ch_rc:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 72.14 $
SystemAdmin.SAM,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP:
/usr/newconfig/etc/sam/reg_da.db:
None
/usr/newconfig/etc/sam/reg_files.db:
$Header: /samsrc/fs/data/fs.tm 73.25.1.1.1.1 2002-02
-25 05:13:42-07 shassa Exp $
$Header: pm.tm,v 73.1 97/12/30 12:11:24 hmgr Exp $
$Revision: 73.2 $
/usr/newconfig/etc/sam/reg_tm.db:
None
/usr/newconfig/var/sam/ts/pam_mod.reg:
None
/usr/sam/bin/chdhcptab:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 73.1 $
/usr/sam/bin/samlog_viewer:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
samlog_viewer $Revision: 74.11 $
/usr/sam/bin/samreg:
samreg $Revision: 74.2 $
SAM Infrastructure Version 2.0
/usr/sam/lbin/autoopt:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 73.3 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
SAM Infrastructure Version 2.0 - 01/13/98 23:06:37
SAM file editing library $Revision: 72.2 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/ch_hostip:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 73.7 $
SAM file editing library $Revision: 72.2 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/ch_rhosts:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 73.3 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/ch_xntp:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 73.5 $
SAM file editing library $Revision: 72.2 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/chuidacl:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 72.4 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/clrlockdcache:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
clearlockdcache.c: $Revision: 73.3 $ $Date: 97/08/13
08:04:06 $
/usr/sam/lbin/dareg:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
dareg $Revision: 74.16 $
HP Distributed System Management Infrastructure Vers
ion 3.0
built on date: 07/26/04 11:08:50
/usr/sam/lbin/get_gr_mems:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/get_sdm_info:
None
/usr/sam/lbin/get_ttydevs:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/ioparser.sh:
$Header: /samsrc/pd/execs/ioparser.sh 73.27.1.2 2002
-02-22 09:24:55-07 shassa Exp $
/usr/sam/lbin/ipconn_load:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
SAM - NNC ipconn_load $Revision: 73.2 $
SAM file editing library $Revision: 72.2 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/laninfo:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 73.23.1.1.1.3 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/lp_rd_pstatus:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
$ B11.23_ic71q Jul 12 2004 10:32:37 $
/usr/sam/lbin/lpmgr:
$Header: lpmgr,v 73.5 2001/08/06 18:17:51 fainmj Exp
$
/usr/sam/lbin/mkterm.sh:
$Revision: 73.5 $
/usr/sam/lbin/nnc_utils:
None
/usr/sam/lbin/pd_ups_parse:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/rsam:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/samx:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
/usr/sam/lbin/tmgrx:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
HP aC++ B3910B A.03.33 Standard Components Library
tmgrx: $Revision: 74.8 $ $Date: 98/10/13 12:50:59 $
/usr/sam/lbin/tmreg:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
tmreg $Revision: 74.14 $
HP Distributed System Management Infrastructure Vers
ion 3.0
built on date: 07/26/04 11:08:50
/usr/sam/lbin/ug_area_vis:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
ug_area_vis $Revision: 73.2 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/upgrpfiles:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 73.2 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/upusrfiles:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 73.4 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lbin/vginfo:
None
/usr/sam/lbin/vlaninfo:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
$Revision: 73.23.1.1.1.3 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/C/arch.cat:
None
/usr/sam/lib/C/boot.ui:
None
/usr/sam/lib/C/br.ui:
$Revision: 73.5 $ */
/usr/sam/lib/C/dhcpv6.ui:
None
/usr/sam/lib/C/dns.ui:
None
/usr/sam/lib/C/fal.cat:
None
/usr/sam/lib/C/fs.cat:
None
/usr/sam/lib/C/fs.ui:
$Header: fs.ui,v 73.21 2001/02/05 22:55:18 kcarper E
xp $ */
/usr/sam/lib/C/fs_vg.h:
$Header: fs_vg.h,v 73.6 99/07/22 11:37:09 hmgr Exp $
*/
/usr/sam/lib/C/hosts.ui:
None
/usr/sam/lib/C/lfv.ui:
None
/usr/sam/lib/C/lp.ui:
$Header: lp.ui,v 73.6 99/06/03 13:51:26 hmgr Exp $ *
/
/usr/sam/lib/C/mo.cat:
None
/usr/sam/lib/C/netg.ui:
None
/usr/sam/lib/C/nfs_netg.ui:
None
/usr/sam/lib/C/nfs_td.ui:
None
/usr/sam/lib/C/nia.ui:
None
/usr/sam/lib/C/nis.ui:
None
/usr/sam/lib/C/nisp.ui:
None
/usr/sam/lib/C/nisp_2.ui:
None
/usr/sam/lib/C/nnc_alias.ui:
None
/usr/sam/lib/C/nnc_setparm.ui:
$Header: nnc_setparm.ui,v 73.1 97/12/02 10:41:22 hmg
r Exp $
/usr/sam/lib/C/nntp.ui:
None
/usr/sam/lib/C/nsswitch.ui:
None
/usr/sam/lib/C/pd.cat:
None
/usr/sam/lib/C/pd_devinfo.tx:
None
/usr/sam/lib/C/pd_dfinfo.tx:
None
/usr/sam/lib/C/pd_scr.cat:
None
/usr/sam/lib/C/rt.ui:
None
/usr/sam/lib/C/sam.cb:
None
/usr/sam/lib/C/sam.ui:
SAM 11.23 Patch PHCO_34974 - $Date: 2007/02/05 12:18
:29 $ - Tag PHCO_34974
/usr/sam/lib/C/security.ui:
None
/usr/sam/lib/C/sysname_td.ui:
$Header: sysname_td.ui,v 72.9 96/10/25 16:03:48 hmgr
Exp $
/usr/sam/lib/C/ts.cat:
None
/usr/sam/lib/C/ts.ui:
None
/usr/sam/lib/C/ug.cat:
None
/usr/sam/lib/C/ug.ui:
$Revision: 73.12 $ */
/usr/sam/lib/C/ug.ut.ui:
$Revision: 73.5 $ */
/usr/sam/lib/C/vlan.ui:
None
/usr/sam/lib/C/vlan_tasks.ui:
None
/usr/sam/lib/fal/fal.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/fal/fal.tm:
$Header: fal_errmsg.h,v 73.2 2000/07/17 23:35:40 tko
pren Exp $ */
$Header: fal_errors.h,v 72.11 95/04/10 18:18:08 hmgr
Exp $ */
/usr/sam/lib/fs/fs.da:
None
/usr/sam/lib/fs/fs.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/fs/fs.tm:
$Header: /ClearCase/ftp/Feb-2002/samsrc1/src/fs/h/fs
_errors.h,v 73.36 2001/09/06 03:49:02 jshah
Exp $ */
$Header: /samsrc/fs/data/fs.tm 73.25.1.1.1.1 2002-02
-25 05:13:42-07 shassa Exp $
/usr/sam/lib/fs/fs_com.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/libcom.sl:
SAM file editing library $Revision: 72.2 $
/usr/sam/lib/liblog.sl:
None
/usr/sam/lib/libsam.sl:
Secure SAM $Revision: 74.5 $ built without SEC_BASE.
/usr/sam/lib/lp/lp.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/mo/mo.da:
$Header: mo.da,v 73.1 97/08/21 10:18:46 hmgr Exp $ *
/
/usr/sam/lib/mo/mo.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/mo/mo.tm:
$Header: mo_defs_tm.h,v 73.1 98/01/12 14:32:36 hmgr
Exp $ */
$Header: mo_errs.h,v 73.5 2001/06/06 18:31:49 tkopre
n Exp $ */
/usr/sam/lib/nnc/boot.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/nnc/nnc.da:
None
/usr/sam/lib/nnc/nnc.sl:
SAM - NNC $Revision: 73.1 $
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/nnc/nnc.tm:
$Header: /ClearCase/ftp/Feb-2002/samsrc1/src/nnc/h/n
nc_msgs.h,v 73.15.1.2 2001/11/26 18:14:53 sa
miso Exp $
/usr/sam/lib/nnc/nnc_da_com.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/pd/pd.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/pd/pd.tm:
$Header: pd_err.h,v 73.5 2001/02/05 22:52:30 kcarper
Exp $ */
$Header: ar_errors.h,v 72.1 94/01/13 16:44:03 hmgr E
xp $ */
$Header: pd_retvals.h,v 73.1 2000/04/24 21:04:57 ole
nder Exp $ */
$Header: pd_olar_retvals.h,v 73.3 2000/06/22 15:45:2
1 olender Exp $ */
/usr/sam/lib/pd/pd_comlib.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/rt/rt.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/rt/rt.tm:
None
/usr/sam/lib/tm/tm_comlib.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/ts/ts.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/ts/ts.tm:
$Header: ts_err.h,v 72.27 96/11/04 14:13:56 hmgr Exp
$ */
/usr/sam/lib/ug/ug.da:
None
/usr/sam/lib/ug/ug.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
/usr/sam/lib/ug/ug.tm:
$Header: ug_errmsg.h,v 73.8 2000/03/28 17:17:39 roma
n Exp $ */
$Header: ug_errors.h,v 73.1 97/10/15 15:52:15 hmgr E
xp $ */
/usr/sam/lib/ug/ug_comlib.sl:
HP System Administration Manager Version 4.0
built on date: 11/21/02 19:53:34
SystemAdmin.SAM-ENG-A-MAN,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,
v=HP:
/usr/share/man/man1m.Z/sam.1m:
None
SystemAdmin.SAM-HELP,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP:
/usr/sam/help/C/FALtut.WhatsNewInSAM.sdl:
None
/usr/sam/help/C/FStd.VxFSoptions.sdl:
None
/usr/sam/help/C/PERF_MONtd.SystemProperties.sdl:
None
/usr/sam/help/C/TSactions.AllSubareas.sdl:
None
/usr/sam/help/C/UGUTtd.CreatNonTrstUsrTmplt.sdl:
None
/usr/sam/help/C/UGUTtd.ModifyUserTemplate.sdl:
None
/usr/sam/help/C/UGUTtd.PasswdSpecification.sdl:
None
/usr/sam/help/C/UGfal.IconHelp.sdl:
None
/usr/sam/help/C/UGole.LocalUsers.sdl:
None
/usr/sam/help/C/UGole.NISplusUsers.sdl:
None
/usr/sam/help/C/UGole.NISusers.sdl:
None
/usr/sam/help/C/UGole.Users.sdl:
None
/usr/sam/help/C/UGtd.AddNewUserAccount.sdl:
None
/usr/sam/help/C/UGtd.ModifyUserAccount.sdl:
None
/usr/sam/help/C/UGtd.PasswordOptsNonTrusted.sdl:
None
/usr/sam/help/C/UGtd.RemoveUser.sdl:
None
/usr/sam/help/C/UGtut.ManagingNISusers.sdl:
None
/usr/sam/help/C/UGtut.Users.sdl:
None
/usr/sam/help/C/nnc/nnc.sdl:
None
/usr/sam/help/ja_JP.SJIS/FALtut.WhatsNewInSAM.sdl:
None
/usr/sam/help/ja_JP.SJIS/FStd.VxFSoptions.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGUTtd.CreatNonTrstUsrTmplt.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGUTtd.ModifyUserTemplate.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGUTtd.PasswdSpecification.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGfal.IconHelp.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGole.LocalUsers.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGole.NISplusUsers.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGole.NISusers.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGole.Users.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGtd.AddNewUserAccount.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGtd.ModifyUserAccount.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGtd.PasswordOptsNonTrusted.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGtd.RemoveUser.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGtut.ManagingNISusers.sdl:
None
/usr/sam/help/ja_JP.SJIS/UGtut.Users.sdl:
None
/usr/sam/help/ja_JP.eucJP/FALtut.WhatsNewInSAM.sdl:
None
/usr/sam/help/ja_JP.eucJP/FStd.VxFSoptions.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGUTtd.CreatNonTrstUsrTmplt.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGUTtd.ModifyUserTemplate.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGUTtd.PasswdSpecification.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGfal.IconHelp.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGole.LocalUsers.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGole.NISplusUsers.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGole.NISusers.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGole.Users.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGtd.AddNewUserAccount.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGtd.ModifyUserAccount.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGtd.PasswordOptsNonTrusted.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGtd.RemoveUser.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGtut.ManagingNISusers.sdl:
None
/usr/sam/help/ja_JP.eucJP/UGtut.Users.sdl:
None
cksum(1) Output:
InternetSrvcs.INETSVCS-BOOT,fr=B.11.23,
fa=HP-UX_B.11.23_IA/PA,v=HP:
92067842 36864 /usr/sbin/setup_bootp
1708490895 45056 /usr/sbin/setup_tftp
OS-Core.UX-CORE,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP:
2300199421 20480 /usr/sbin/ch_rc
SystemAdmin.SAM,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP:
1939131603 2720 /usr/newconfig/etc/sam/reg_da.db
550715632 5556 /usr/newconfig/etc/sam/reg_files.db
2279200808 34217 /usr/newconfig/etc/sam/reg_tm.db
4235321450 3670 /usr/newconfig/var/sam/ts/pam_mod.reg
1557438800 40960 /usr/sam/bin/chdhcptab
237481410 61440 /usr/sam/bin/samlog_viewer
2335821684 11522 /usr/sam/bin/samreg
666757249 94208 /usr/sam/lbin/autoopt
3876857509 65536 /usr/sam/lbin/ch_hostip
2739721017 28672 /usr/sam/lbin/ch_rhosts
555014118 57344 /usr/sam/lbin/ch_xntp
1747911699 20480 /usr/sam/lbin/chuidacl
390180539 20480 /usr/sam/lbin/clrlockdcache
3089277849 28672 /usr/sam/lbin/dareg
3391366059 32768 /usr/sam/lbin/get_gr_mems
2902431036 4268 /usr/sam/lbin/get_sdm_info
195105842 20480 /usr/sam/lbin/get_ttydevs
2474705190 26681 /usr/sam/lbin/ioparser.sh
1024348277 28672 /usr/sam/lbin/ipconn_load
2169308494 40960 /usr/sam/lbin/laninfo
1686645876 229376 /usr/sam/lbin/lp_rd_pstatus
300748294 104794 /usr/sam/lbin/lpmgr
3471154783 9965 /usr/sam/lbin/mkterm.sh
2539434754 50112 /usr/sam/lbin/nnc_utils
2070109784 28672 /usr/sam/lbin/pd_ups_parse
3057266912 16384 /usr/sam/lbin/rsam
1006552680 49152 /usr/sam/lbin/samx
369943164 57344 /usr/sam/lbin/tmgrx
2699087392 49152 /usr/sam/lbin/tmreg
3473536667 24576 /usr/sam/lbin/ug_area_vis
432409566 36864 /usr/sam/lbin/upgrpfiles
423792585 36864 /usr/sam/lbin/upusrfiles
363099193 21967 /usr/sam/lbin/vginfo
296482841 36864 /usr/sam/lbin/vlaninfo
3184296068 32826 /usr/sam/lib/C/arch.cat
1781460391 57954 /usr/sam/lib/C/boot.ui
3172988086 43869 /usr/sam/lib/C/br.ui
1478591485 31939 /usr/sam/lib/C/dhcpv6.ui
2546477564 24364 /usr/sam/lib/C/dns.ui
3382571016 18330 /usr/sam/lib/C/fal.cat
3927771707 116114 /usr/sam/lib/C/fs.cat
386671238 50992 /usr/sam/lib/C/fs.ui
4005651786 40524 /usr/sam/lib/C/fs_vg.h
1883436299 33881 /usr/sam/lib/C/hosts.ui
129702521 10490 /usr/sam/lib/C/lfv.ui
2395980298 47143 /usr/sam/lib/C/lp.ui
1939499558 2116 /usr/sam/lib/C/mo.cat
279969415 48295 /usr/sam/lib/C/netg.ui
4086038609 11116 /usr/sam/lib/C/nfs_netg.ui
1020922371 60457 /usr/sam/lib/C/nfs_td.ui
773094349 117135 /usr/sam/lib/C/nia.ui
2045448518 16968 /usr/sam/lib/C/nis.ui
3112273303 178889 /usr/sam/lib/C/nisp.ui
3683153836 13480 /usr/sam/lib/C/nisp_2.ui
1674829735 1922 /usr/sam/lib/C/nnc_alias.ui
3991741597 4547 /usr/sam/lib/C/nnc_setparm.ui
3811293450 9605 /usr/sam/lib/C/nntp.ui
3783481629 18163 /usr/sam/lib/C/nsswitch.ui
1945233377 33638 /usr/sam/lib/C/pd.cat
2267063226 33171 /usr/sam/lib/C/pd_devinfo.tx
2006646874 23038 /usr/sam/lib/C/pd_dfinfo.tx
65815289 2732 /usr/sam/lib/C/pd_scr.cat
1154217390 11179 /usr/sam/lib/C/rt.ui
3613973700 21941 /usr/sam/lib/C/sam.cb
3585855868 1063 /usr/sam/lib/C/sam.ui
3665954775 21270 /usr/sam/lib/C/security.ui
2606365891 2905 /usr/sam/lib/C/sysname_td.ui
3515535649 27230 /usr/sam/lib/C/ts.cat
4269187258 49383 /usr/sam/lib/C/ts.ui
621211616 74499 /usr/sam/lib/C/ug.cat
1269070837 121489 /usr/sam/lib/C/ug.ui
1970638472 116396 /usr/sam/lib/C/ug.ut.ui
2847878829 8547 /usr/sam/lib/C/vlan.ui
1386503924 18401 /usr/sam/lib/C/vlan_tasks.ui
1767666728 159744 /usr/sam/lib/fal/fal.sl
731799669 19607 /usr/sam/lib/fal/fal.tm
1163179308 22317 /usr/sam/lib/fs/fs.da
1160347479 909312 /usr/sam/lib/fs/fs.sl
2543056103 191383 /usr/sam/lib/fs/fs.tm
340668104 409600 /usr/sam/lib/fs/fs_com.sl
650463696 57344 /usr/sam/lib/libcom.sl
328601651 28672 /usr/sam/lib/liblog.sl
3386924415 495616 /usr/sam/lib/libsam.sl
1875563303 114688 /usr/sam/lib/lp/lp.sl
3475354849 3127 /usr/sam/lib/mo/mo.da
2824707264 45056 /usr/sam/lib/mo/mo.sl
2006649257 7176 /usr/sam/lib/mo/mo.tm
154665393 139264 /usr/sam/lib/nnc/boot.sl
2631528492 27279 /usr/sam/lib/nnc/nnc.da
2824550153 1056768 /usr/sam/lib/nnc/nnc.sl
3081156033 489426 /usr/sam/lib/nnc/nnc.tm
500695425 16384 /usr/sam/lib/nnc/nnc_da_com.sl
4220511579 135168 /usr/sam/lib/pd/pd.sl
3684721419 50815 /usr/sam/lib/pd/pd.tm
2547990312 180224 /usr/sam/lib/pd/pd_comlib.sl
911399539 61440 /usr/sam/lib/rt/rt.sl
1171927782 21648 /usr/sam/lib/rt/rt.tm
2299963046 86016 /usr/sam/lib/tm/tm_comlib.sl
868754095 233472 /usr/sam/lib/ts/ts.sl
3241205754 78401 /usr/sam/lib/ts/ts.tm
299168268 11405 /usr/sam/lib/ug/ug.da
962486489 638976 /usr/sam/lib/ug/ug.sl
1552577124 182249 /usr/sam/lib/ug/ug.tm
3331585916 94208 /usr/sam/lib/ug/ug_comlib.sl
SystemAdmin.SAM-ENG-A-MAN,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,
v=HP:
3864899482 9981 /usr/share/man/man1m.Z/sam.1m
SystemAdmin.SAM-HELP,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP:
268881348 42700 /usr/sam/help/C/FALtut.WhatsNewInSAM.sdl
1012292236 5902 /usr/sam/help/C/FStd.VxFSoptions.sdl
1245379889 9979 /usr/sam/help/C/
PERF_MONtd.SystemProperties.sdl
187377302 4233 /usr/sam/help/C/TSactions.AllSubareas.sdl
1558971741 21131 /usr/sam/help/C/
UGUTtd.CreatNonTrstUsrTmplt.sdl
2674804795 4430 /usr/sam/help/C/
UGUTtd.ModifyUserTemplate.sdl
226534896 16327 /usr/sam/help/C/
UGUTtd.PasswdSpecification.sdl
303573394 12876 /usr/sam/help/C/UGfal.IconHelp.sdl
882934821 9912 /usr/sam/help/C/UGole.LocalUsers.sdl
1227060131 9294 /usr/sam/help/C/UGole.NISplusUsers.sdl
2919199021 9114 /usr/sam/help/C/UGole.NISusers.sdl
4211462469 9153 /usr/sam/help/C/UGole.Users.sdl
569804781 22393 /usr/sam/help/C/UGtd.AddNewUserAccount.sdl
1411293493 22390 /usr/sam/help/C/UGtd.ModifyUserAccount.sdl
613931270 10766 /usr/sam/help/C/
UGtd.PasswordOptsNonTrusted.sdl
781199813 9774 /usr/sam/help/C/UGtd.RemoveUser.sdl
2612086147 3722 /usr/sam/help/C/UGtut.ManagingNISusers.sdl
2526455756 2241 /usr/sam/help/C/UGtut.Users.sdl
3393496646 1061293 /usr/sam/help/C/nnc/nnc.sdl
1738262461 45295 /usr/sam/help/ja_JP.SJIS/
FALtut.WhatsNewInSAM.sdl
1393021790 6371 /usr/sam/help/ja_JP.SJIS/
FStd.VxFSoptions.sdl
3469338954 21600 /usr/sam/help/ja_JP.SJIS/
UGUTtd.CreatNonTrstUsrTmplt.sdl
2078806574 4501 /usr/sam/help/ja_JP.SJIS/
UGUTtd.ModifyUserTemplate.sdl
4031207891 17054 /usr/sam/help/ja_JP.SJIS/
UGUTtd.PasswdSpecification.sdl
3734828390 13283 /usr/sam/help/ja_JP.SJIS/UGfal.IconHelp.sdl
2928417592 10234 /usr/sam/help/ja_JP.SJIS/
UGole.LocalUsers.sdl
4149273053 9606 /usr/sam/help/ja_JP.SJIS/
UGole.NISplusUsers.sdl
296049138 9404 /usr/sam/help/ja_JP.SJIS/UGole.NISusers.sdl
1096741107 9453 /usr/sam/help/ja_JP.SJIS/UGole.Users.sdl
1025684885 23003 /usr/sam/help/ja_JP.SJIS/
UGtd.AddNewUserAccount.sdl
2806363201 23130 /usr/sam/help/ja_JP.SJIS/
UGtd.ModifyUserAccount.sdl
3288473232 11267 /usr/sam/help/ja_JP.SJIS/
UGtd.PasswordOptsNonTrusted.sdl
2804550337 10162 /usr/sam/help/ja_JP.SJIS/
UGtd.RemoveUser.sdl
2404180550 3847 /usr/sam/help/ja_JP.SJIS/
UGtut.ManagingNISusers.sdl
975497791 2341 /usr/sam/help/ja_JP.SJIS/UGtut.Users.sdl
4149130054 45175 /usr/sam/help/ja_JP.eucJP/
FALtut.WhatsNewInSAM.sdl
1895393320 6334 /usr/sam/help/ja_JP.eucJP/
FStd.VxFSoptions.sdl
389630817 21521 /usr/sam/help/ja_JP.eucJP/
UGUTtd.CreatNonTrstUsrTmplt.sdl
4281624655 4497 /usr/sam/help/ja_JP.eucJP/
UGUTtd.ModifyUserTemplate.sdl
4132318221 16977 /usr/sam/help/ja_JP.eucJP/
UGUTtd.PasswdSpecification.sdl
527580806 13219 /usr/sam/help/ja_JP.eucJP/UGfal.IconHelp.sdl
2003440629 10206 /usr/sam/help/ja_JP.eucJP/
UGole.LocalUsers.sdl
723555949 9569 /usr/sam/help/ja_JP.eucJP/
UGole.NISplusUsers.sdl
1106775815 9362 /usr/sam/help/ja_JP.eucJP/UGole.NISusers.sdl
1046667471 9412 /usr/sam/help/ja_JP.eucJP/UGole.Users.sdl
3079315000 22894 /usr/sam/help/ja_JP.eucJP/
UGtd.AddNewUserAccount.sdl
2481870024 23026 /usr/sam/help/ja_JP.eucJP/
UGtd.ModifyUserAccount.sdl
994038056 11199 /usr/sam/help/ja_JP.eucJP/
UGtd.PasswordOptsNonTrusted.sdl
3627633284 10124 /usr/sam/help/ja_JP.eucJP/
UGtd.RemoveUser.sdl
4078591045 3817 /usr/sam/help/ja_JP.eucJP/
UGtut.ManagingNISusers.sdl
140129243 2326 /usr/sam/help/ja_JP.eucJP/UGtut.Users.sdl
Patch Conflicts: None
Patch Dependencies:
s700: 11.23: PHKL_31500 PHCO_31566 PHCO_31589 PHSS_32674
s800: 11.23: PHKL_31500 PHCO_31566 PHCO_31589 PHSS_32674
Hardware Dependencies: None
Other Dependencies:
On Dual-Core Intel Itanium 2 Processor 9000 Series
based HP Integrity servers the patches PHKL_33752
and PHCO_33751 or those superseding them must be
installed for this SAM patch to display the correct
CPU Core frequency. On HP9000 systems the patches
PHKL_33752 and PHCO_33751 need not be applied.
Supersedes:
PHCO_31628 PHCO_29666 PHCO_31820 PHCO_31926 PHCO_32870 PHCO_34208
Equivalent Patches: None
Patch Package Size: 4440 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHCO_34974
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHCO_34974.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHCO_34974. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHCO_34974.text file is
available in the product readme:
swlist -l product -a readme -d @ /tmp/PHCO_34974.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHCO_34974.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions: None
|
