 |
≫ |
|
|
|
パッチ名: PHCO_35216
パッチ摘要: s700_800 11.23 VRTS 5.0 MP1 VRTSccgコマンドパッチ
作成日: 07/04/03
公開日: 07/04/11
ハードウェアプラットフォームおよびOSリリース:
s700: 11.23
s800: 11.23
現象:
PHCO_35216:
(SR:8606474815 CR:JAGag29290)
エラー"VRTSobc33: VERITAS gridnode startup problems in /etc/rc.log"。
問題点の説明:
PHCO_35216:
(SR:8606474815 CR:JAGag29290)
(Symantec不具合番号: 792940)
エラー"VRTSobc33: VERITAS gridnode startup problems in /etc/rc.log"。
VERITAS gridnodeの起動スクリプトが正常に実行しませんでした。
11.23 VxVMバンドル5.0のインストール時に、以下のようなメッセージが
/etc/rc.logに記録されていました。
Starting Veritas Enterprise Administrator gridnode
agent Output from "/sbin/rc2.d/S750vxpal.gridnode start":
----------------------------
NOTE: Starting VERITAS gridnode
このメッセージがrc.logに2回記録されていたため、システムのリブート時に
gridnodeエージェントが2回起動したような印象を与えていました。
解決方法:
gridセントラル/ノードの起動/停止時に、重複した"starting"/"stopping"メ
ッセージを出力しないようにコードを修正しました。
-----------------------------------------------------------------------------
Patch Name: PHCO_35216
Patch Description: s700_800 11.23 VRTS 5.0 MP1 VRTSccg Command Patch
Creation Date: 07/04/03
Post Date: 07/04/11
Hardware Platforms - OS Releases:
s700: 11.23
s800: 11.23
Products:
VRTSccg 5.0.30.0
Filesets:
VRTSccg.VRTSCCG,fr=5.0.30.0,fa=HP-UX_B.11.23_IA/PA,v=HP
VRTSccg.VRTSCCG,fr=5.0.28.0,fa=HP-UX_B.11.23_IA/PA,v=Symantec
Automatic Reboot?: No
Status: General Release
Critical: No
Category Tags:
defect_repair general_release
Path Name: /hp-ux_patches/s700_800/11.X/PHCO_35216
Symptoms:
PHCO_35216:
( SR: 8606474815 CR: JAGag29290 )
1. VRTSobc33: VERITAS gridnode startup
problems in /etc/rc.log.
Defect Description:
PHCO_35216:
( SR: 8606474815 CR: JAGag29290 )
1. ( Symantec Incident Number 792940 )
VRTSobc33: VERITAS gridnode startup
problems in /etc/rc.log The startup script for
VERITAS gridnode is not running properly.
The following is seen in /etc/rc.log when installing
11.23 VxVM bundle 5.0:
Starting Veritas Enterprise Administrator gridnode
agent Output from "/sbin/rc2.d/S750vxpal.gridnode start":
----------------------------
NOTE: Starting VERITAS gridnode
This message is logged twice in rc.log, which is giving
impression that gridnode agent is started twice during
reboot of system.
Resolution:
Not printing duplicate "starting" and "stopping" messages
while starting/stopping grid central/node.
Enhancement:
No
SR:
8606474815
Patch Files:
VRTSccg.VRTSCCG,fr=5.0.30.0,fa=HP-UX_B.11.23_IA/PA,v=HP:
VRTSccg.VRTSCCG,fr=5.0.28.0,fa=HP-UX_B.11.23_IA/PA,
v=Symantec:
/opt/VRTSccg/bin/gridcli
/opt/VRTSccg/config/setup.sh
/opt/VRTSccg/config/startgridcentral.sh
/opt/VRTSccg/config/startgridnode.sh
/opt/VRTSccg/config/unsetup.sh
/opt/VRTSccg/lib/libgridapi.sl.33
/opt/VRTSccg/lib/libgridprov.sl
what(1) Output:
VRTSccg.VRTSCCG,fr=5.0.30.0,fa=HP-UX_B.11.23_IA/PA,v=HP:
/opt/VRTSccg/bin/gridcli:
$Revision: 92453-07 linker linker crt0.o B.11.33 020
605 $
/opt/VRTSccg/config/setup.sh:
None
/opt/VRTSccg/config/startgridcentral.sh:
None
/opt/VRTSccg/config/startgridnode.sh:
None
/opt/VRTSccg/config/unsetup.sh:
None
/opt/VRTSccg/lib/libgridapi.sl.33:
None
/opt/VRTSccg/lib/libgridprov.sl:
None
cksum(1) Output:
VRTSccg.VRTSCCG,fr=5.0.30.0,fa=HP-UX_B.11.23_IA/PA,v=HP:
3595173649 102400 /opt/VRTSccg/bin/gridcli
2954929509 10763 /opt/VRTSccg/config/setup.sh
1131622228 2011 /opt/VRTSccg/config/startgridcentral.sh
549742378 1989 /opt/VRTSccg/config/startgridnode.sh
353097926 3891 /opt/VRTSccg/config/unsetup.sh
2789864055 102400 /opt/VRTSccg/lib/libgridapi.sl.33
1983511290 319488 /opt/VRTSccg/lib/libgridprov.sl
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes: None
Equivalent Patches: None
Patch Package Size: 190 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHCO_35216
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHCO_35216.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHCO_35216. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHCO_35216.text file is
available in the product readme:
swlist -l product -a readme -d @ /tmp/PHCO_35216.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHCO_35216.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions: None
|
