 |
≫ |
|
|
|
パッチ名: PHCO_35520
パッチ摘要: s700_800 11.11 累積SAMパッチ
作成日: 07/02/10
公開日: 07/03/02
ハードウェアプラットフォームおよびOSリリース:
s700: 11.11
s800: 11.11
現象:
PHCO_35520:
1. JAGag05164
SAMが、ユーザーの追加時に/etc/skel内のディレクトリをコピーしません。
2. JAGaf92083
SAMは、新たなRoHS PCI muxカードをサポートする必要があります。
3. JAGag23921
SAMの"Disks and File Systems"の下にある"Disk Devices"サブ領域の応答時
間が長すぎます。
4. JAGaf93277
SAMのネットワークサービスが、使用可能なftpを使用不可と表示します。
5.JAGag05301
SAMがデフォルトの経路(ゲートウェイ)を変更できません。
6. JAGag19227
SAMが不正にread-mostlyファイルシステムを構成します。
7. JAGag28304
SAMがautomounterファイルを正しく解析できません。
問題点の説明:
PHCO_35520:
1. JAGag05164
SAMが使用していたプログラムがファイルだけしかコピーできなかったため
/etc/skel内のディレクトリがコピーされませんでした。
解決方法:
/etc/skel内のファイルとディレクトリを両方ともコピーするようにSAMのコー
ドを修正しました。
2. JAGaf92083
SAMは、pci_mux1ドライバを使用する新たなPCI muxカードをサポートする必要
があります。
解決方法:
pci_mux1ドライバを使用する新たなmuxカードをサポートするようにSAMを修正
しました。
3. JAGag23921
複数のパスで構成された大規模ディスクアレイに接続されている場合、SAMの
"Disks and File Systems"の下にある"Disk Devices"サブ領域の応答時間が長
すぎました。
解決方法:
複数のパスをより速く検出できるアルゴリズムを使ってSAMの"Disk Devices"
の応答時間を短縮しました。
4. JAGaf93277
/etc/servicesファイル内にftp-dataポートが指定されていないと、SAMのネッ
トワークサービスは、使用可能なftpを使用不可と表示していました。
解決方法:
ftp-dataポートを使用不可にしても、ftpのステータスを正しく表示するよう
にSAMのコードを修正しました。
5. JAGag05301
デフォルトの経路(ゲートウェイ)エントリが二重引用符で囲まれていると、
SAMは、既存のエントリを変更せずに、不正に新たなエントリを追加していま
した。
解決方法:
新たなエントリを追加するのではなく既存のエントリを更新するようにSAMの
コードを修正しました。
6. JAGag19227
SAMは不正に、read-mostlyファイルシステムを構成していました。エクスポー
トファイルシステムの読み取り書き込みリスト内と読み取り専用リスト内の両
方にエントリがあると、SAMは読み取り専用リスト内のエントリを削除してい
ました。
解決方法:
両リスト内の既存のエントリを維持するようにSAMのコードを修正しました。
7. JAGag28304
automounterファイル内に、次の行が継続行であることを示す"\"と改行文字と
の間に空白文字のある行が含まれていると、SAMはそのautomounterファイルを
正しく解析できませんでした。
解決方法:
"\"と改行文字との間に空白文字のある行を正しく処理するようにSAMのコード
を修正しました。
-----------------------------------------------------------------------------
Patch Name: PHCO_35520
Patch Description: s700_800 11.11 cumulative SAM patch
Creation Date: 07/02/10
Post Date: 07/03/02
Hardware Platforms - OS Releases:
s700: 11.11
s800: 11.11
Products: N/A
Filesets:
InternetSrvcs.INETSVCS-BOOT,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP
OS-Core.UX-CORE,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP
SystemAdmin.SAM,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP
SystemAdmin.SAM-ENG-A-MAN,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP
SystemAdmin.SAM-HELP,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP
Automatic Reboot?: No
Status: General Release
Critical:
No (superseded patches were critical)
PHCO_32397: ABORT
This is critical as SAM gives a core dump in
the Auditing and Security -> Audited Events screen
as mentioned in the CR JAGaf62293.
Category Tags:
defect_repair hardware_enablement enhancement
general_release critical halts_system
Path Name: /hp-ux_patches/s700_800/11.X/PHCO_35520
Symptoms:
PHCO_35520:
JAGag05164) While adding a user through SAM,
directories in /etc/skel are
not copied.
JAGaf92083) SAM needs to support the new
RoHS PCI mux card.
JAGag23921) The response time of SAM's Disk
Devices sub-area under Disks and
File Systems is too long.
JAGaf93277) Network services in SAM shows ftp
disabled when ftp is enabled.
JAGag05301) Modifying the default route(gateway)
does not work in SAM.
JAGag19227) SAM configures read-mostly file systems
incorrectly.
JAGag28304) SAM is unable to parse the automounter
files properly.
PHCO_34207:
JAGaf80147) When the /etc/nsswitch.conf file was modified
to create the "passwd: compat" option from SAM
-> Networking and Communications -> Name
Service Switch sub area, all the local users
were locked out from logging in.
JAGaf80148) If the nodename and hostname are different, SAM
cannot access the Networking and Communications
-> Hosts -> Local Hosts File functional area and
fails to update the /etc/hosts file.
JAGaf89648) SAM needs to support EVA GL active/active arrays
that identify themselves as HSV101 or HSV111.
JAGaf90614) SAM does not warn users about temporary
passwords in trusted system.
PHCO_32397:
JAGaf44075) SAM does not support HP StorageWorks MSA1000
storage device.
JAGae58009) On entering the SAM -> Disks and File Systems
subarea each time, SAM creates a temporary
device file transformer_dev in the /var/sam
directory when the HP-UX system is attached to
the transformer device.
JAGaf43299) SAM fails to build the kernel when applying a
template and displays the following error
message:
===============================================
The kmadmin command has failed to unload driver
module krm. The stderr output from the command
is shown below: kmadmin: krm: Invalid argument
===============================================
The scenario is as follows:
After copying /stand/vmunix from one system to
/tmp on the other system, and on entering the
SAM -> Kernel Configuration -> Configurable
Parameters subarea, specify /tmp/vmunix and go
to Actions -> Templates -> Apply Template
Values, check both Driver and Subsystem Values
and Configurable Parameter Values, and go to
Actions -> Process New Kernel.
JAGaf46301) SAM man pages are not clear about the
restricted SAM user's user and group
privileges.
JAGaf55409) On entering the SAM -> Disks and File Systems
-> Disk Devices subarea, SAM does not correctly
detect multiple paths for XP12000 LUNs.
JAGaf56757) On entering the SAM -> Disks and File Systems
-> Disk Devices subarea, SAM does not correctly
detect multiple paths for EVA XL arrays.
JAGaf62293) On a trusted system, SAM dumps core in the
SAM -> Auditing and Security -> Audited
Events screen.
JAGaf65943) On entering the SAM -> Networking and
Communications -> Name Service Switch subarea,
and while modifying the name service switch
settings for any service in the Configure Name
Service Switch screen, SAM does not display
the current settings of that service properly.
JAGaf74405) On entering the SAM -> Printers and Plotters
subarea, SAM displays the following error
message and the printers are not listed in
SAM:
===========================================
An unexpected error has occurred retrieving
information about printers ...
===========================================
JAGaf75337) The HP LTO448 tape drive reports itself to the
HP-UX operating system as "HP Ultrium 2-SCSI"
in response to the SCSI inquiry. SAM then
incorrectly reports the drive as "HP Ultrium
460 External Drive".
JAGaf75354) In the ObAM description file
/usr/sam/lib/C/ts.ui, there is a nested
comment, which may result in a abnormal
termination of the trusted system subarea.
PHCO_31314:
JAGaf49179) SAM displays the following message while
retrieving the disk list:
----------------------------------------------
The Logical Volume Manager shows this device
file, /dev/dsk/Disk_0, with hardware path, , as
belonging to Volume Group, rootdg. SAM has
determined that this hardware path is not
currently active because either the device is
disconnected, or this is not the primary path
to a multiple path physical volume. This
results in incorrect disk utilization
information in the Disk Devices and Volume
Group lists.
----------------------------------------------
The message is displayed in the following
scenario:
On a system that uses VxVM, enter "SAM -> Disks
and File Systems -> Disk Devices" subarea. VxVM
volumes are created with attached disk devices.
The VxVM disks are initialized using enclosure-
based names.
JAGae98694) When a new volume group is created through SAM,
the following error message is displayed:
===========================================
vgcreate: Minor number of
/dev/vg_informix/group is not unique.
/dev/vg_pm/group has the same minor number.
===========================================
This is caused by SAM assuming that minor
numbers allocated to inactive volume groups are
available.
JAGaf10354) When SAM is used to convert a system into
trusted mode with the super user "root" having a
non-standard primary group, the files and
directories under the trusted database "/tcb/"
are created with an inappropriate group.
JAGaf25212) When a default route is added or modified from
the Route functional area of SAM, the original
configuration in the /etc/rc.config.d/netconf
file may be lost.
JAGaf35416) "Run SAM on Remote Systems" subarea may result
in files and directories getting created on
the remote system with an inappropriate group.
JAGaf42618) The online help of SAM displays incorrect
information about trusted system password
lifetime parameter.
JAGaf47496) At the time of installing a SAM patch,
any process whose name contains the
string "samd" also gets killed along
with "/usr/sam/lbin/samd"
JAGaf52760) When trying to extend a volume group with
adding a disk, SAM(1m) fails with the following
error message while vgextend(1m) from the
command-line succeeds:
================================================
Volume group <vgname> is currently configured
to contain a maximum of <maxsize> megabytes of
space. The current size of this volume group
<cursize>, plus the additional space <new_size>
exceeds the maximum limit. The volume group
cannot be extended if the size of disk(s)
exceeds the size of volume group.
===============================================
JAGaf55711) SAM fails to modify a deactivated user when
password options are changed for that user in
shadow mode system.
JAGaf55984) SAM needs to be enhanced to support
configuration of driver parameters and IP
parameters for 10GBASE-SR cards.
PHCO_31312:
JAGae84402) Enhance SAM to support password aging and
account lifetime features in SAM -> Account
for Users and Groups -> Users subarea when the
system is in shadow mode.
JAGaf32077) Enhance SAM online help to document password
aging and account lifetime features in SAM ->
Account for Users and Groups -> Users subarea
when the system is in shadow mode.
PHCO_30598:
JAGaf32099) For an EVA disk array, SAM->Disks and
FileSystems->Disk Devices functional area
displays the alternate path to a disk as a
separate LUN if the device identifier bytes
do not match.
PHCO_29327:
JAGad98578) SAM displays junk values against the "Configure
Aliases..." button in the "Modify Host in File"
screen. Also, SAM displays an empty "Configure
Aliases" screen on choosing the "Configure
Aliases" button in the following scenario:
Enter "SAM -> Networking and Communications
-> Hosts -> Local Hosts" subarea, select an
entry and choose the "Modify" menu item from
the "Actions" menu.
JAGae16057) The following warning messages appear at boot
time for SNA drivers on the console and can
also be seen using the dmesg(1M) command at the
command-line prompt:
-----------------------------------------------
WARNING: modld: Module sixd, is already
statically linked.
WARNING: modld: Module sixm, is already
statically linked.
WARNING: modld: Module sixp, is already
statically linked.
WARNING: modld: Module sixq, is already
statically linked.
WARNING: modld: Module sixr, is already
statically linked.
WARNING: modld: Module sixt, is already
statically linked.
-----------------------------------------------
The warning messages appear in the following
scenario:
Enter "SAM-> Networking and
Communications -> SNAPlus2 Installation"
subarea, select "SNAplus2 Environment" and then
choose the "Add" menu item under the "Actions"
menu. Select other SNAplus2 components that
have the status, "Not Added", and add them
using the "Add" menu item in the "Actions"
menu. Select "File-> Exit" and click "Yes" to
the confirmation message. In the "Create a New
Kernel" window, select the "Create a New
Kernel Now" option and click the OK button on
"Reboot the System" window.
JAGae26852) When an interface is configured with an IPv4/
IPv6 address that is already assigned to any
other interface, SAM correctly displays an
error message but writes duplicate IPv4/IPv6
addresses into the files
/etc/rc.config.d/netconf or
/etc/rc.config.d/netconf-ipv6 and erroneous
changes are made to the file /etc/hosts
in the following scenario:
Enter "SAM -> Networking and
Communications -> Network Interface Cards"
subarea, and choose the "Modify" menu item from
the "Actions" menu.
JAGae44626) SAM does not allow management of local users
and local groups on an NIS+ enabled system
when the NIS+ master server is not reachable.
JAGae48820) SAM fails to display the following error
message while configuring the "Advanced
Options" for a gelan card:
-----------------------------------------------
Jumbo frames can be configured only at Gigabit
speeds. Please set Autonegotiation ON if you
want MTU of 9000.
-----------------------------------------------
The scenario is as follows:
Enter "SAM -> Networking and
Communications -> Network Interface Cards"
subarea, select a 'gelan' card and select the
"Modify" menu item from the "Actions" menu. In
the "Configure LAN Card" screen, select the
value for autoneg field as "OFF" and select the
"Advanced Options" button. Select the value for
Maximum Transmission Unit as 9000 in the
"Configure Advanced Options" screen and click
OK.
JAGae52086) On entering "SAM -> Accounts for Users and
Groups -> NIS+ Users" subarea, SAM stops
processing user entries once it encounters an
invalid entry in the NIS or NIS+ password
table.
JAGae52920) While setting up DNS and referring to the DNS
settings in /etc/named.boot, SAM displays the
following bus error message:
----------------------------------------------
UNEXPECTED EXIT: process LANG=C LC_ALL=C
/usr/sam/lbin/samx -C -n -p
4733 -s primary_DNS_server
/usr/sam/lib//dns.ui exited with a
non-zero exit status.
sh: 5175 Bus error(coredump)
----------------------------------------------
The bus error message appears in the following
scenario:
Enter "SAM -> Networking and
Communications -> DNS (BIND) -> DNS Local Name
Server" subarea, entries from /etc/named.boot
are displayed in the "DNS Local Name Server"
screen. Choose the second or third entry and
select the "Modify" menu item from the
"Actions" menu.
JAGae54576) SAM adds a NIS+ user successfully to the
password table but fails to update the
credentials in the following scenario:
Enter "SAM -> Accounts for Users and Groups
-> NIS+ Users" subarea. Choose the "Add" menu
item from the "Actions" menu and set the
"Create User Credentials" as ON in the "Add
User" dialog window. This scenario occurs if
the credentials already exist for another user
with same UID in the parent domain.
JAGae54919) SAM does not load ASCII template files or blank
template files properly and the following
error message is displayed:
---------------------------------------------
A SAM internal error has occurred.
The error handler has gotten the error code 0
of type
NOTE with the associated strings:
---------------------------------------------
The error message appears in the following
scenario:
Enter "SAM -> Kernel Configuration ->
Configurable Parameters" subarea, select the
"Templates" menu item from the "Actions" menu.
Select "Load a Template File..." menu item from
the "Actions" menu and provide a valid template
file. Select "Apply Template Values..." menu
item from the "Actions" menu and select "Refresh
List" menu item from the "Options" menu.
JAGae56856) The calculation made by SAM to check the space
available on the disk does not match the
calculations performed by the LVM subsystem in
the following scenario:
Enter "SAM -> Disks and Filesystems ->
Volume Groups" subarea, choose "Actions ->
Create" menu item to create a new volume group.
JAGae60721) The PCI Token Ring card is disabled even when
the driver parameter is not modified in the
following scenario:
Enter "SAM -> Networking and
Communications -> Network Interface Cards"
subarea, select an enabled PCI Token Ring card
and choose the "Modify" menu item from the
"Actions" menu.
JAGae61148) The manpage (samlog_view.1) and online help for
samlog viewer has to be modified as the date
format has changed from YY format to CC or
CCYY format, where CC refers to century and
YY refers to year.
JAGae61160) SAM considers the year as 1970 when
"/usr/sam/bin/samlog_viewer" is invoked with
year greater than 2037. Also,
"/usr/sam/bin/samlog_viewer" is not Y2K
compliant. The scenario is as follows:
Invoke samlog viewer by issuing the following
command by specifying a year greater than 2037:
/usr/sam/bin/samlog_viewer -s 120300002038
or click the "Time Range" button in the "SAM
log viewer" window. The "Time Range" window
appears and in the "Year" field, specify a
year greater than 2037.
JAGae61583) SAM online help displays incorrect description
for the minimum, maximum and default values of
"maxdsiz", and "maxdsiz_64" kernel parameters.
JAGae67830) A temporary log file with name '0' (zero) is
created in the root directory while upgrading
from HP-UX 11.00 release to HP-UX 11.11 release.
JAGae70332) From /var/sam/log/samlog, it is observed that
the ifconfig(1M) command is executed, even if
IP parameters are not modified in the following
scenario:
Enter "SAM -> Networking and Communications ->
Network Interface Cards" subarea, select an
interface and choose the "Modify" menu item
from the "Actions" menu. Do not change IP
parameters on the "Configure LAN Card" screen
and click OK.
JAGae72428) VLAN cannot be viewed or created by SAM and the
following error message is displayed:
-----------------------------------------------
UNEXPECTED EXIT: process LANG=C LC_ALL=C
/usr/sam/lbin/samx -C -n -p
20272 -s nia /usr/sam/lib//nia.ui exited
with a non-zero exit status.
sh 21100 Memory fault
-----------------------------------------------
The error message appears in the following
scenario:
Enter "SAM -> Networking and Communications ->
Network Interface Cards" subarea, and select
"Virtual LAN" from the "List" menu.
JAGae74095) SAM critical resource analysis (CRA) does not
allow online replacement of a card if a mounted
file system on any of the disks connected to a
card is unmounted from the command-line. The
scenario is as follows:
Enter "SAM -> Peripheral Devices -> Cards"
subarea, select a card and choose the "Replace"
menu item under the "Actions" menu. SAM reports
the following error message if any of the disks
connected to the card has a mounted file
system:
-----------------------------------------------
CRITICAL: One or more mounted file systems is
affected. File systems must be unmounted before
the driver can be suspended. Affected file
systems on evaluated devices:
/FS_Test
-----------------------------------------------
Unmount the filesystem using the command
/usr/sbin/mount <filesystem>. Repeat the
replace action from SAM. The following error
message is displayed:
-----------------------------------------------
CRITICAL: One or more mounted file systems is
affected. File systems must be unmounted before
the driver can be suspended. Affected file
systems on evaluated devices:
/FS_Test
-----------------------------------------------
JAGae74460) SAM displays the following error message while
performing interactive backup through SAM:
----------------------------------------------
"ERROR sh 11998 Memory fault"
----------------------------------------------
The error message appears in the following
scenario:
Enter "SAM -> Backup and Recovery ->
Interactive Backup and Recovery" subarea,
highlight the "Use remote back up device ->
Backup Files Interactively" menu item from the
"Actions" menu. Click the "Select Backup scope"
button from the "Back up Files Interactively"
window.
JAGae75264) SAM does not check if the logical volume
extended is a boot logical volume. On extending
the boot logical volume from "SAM -> Disks and
Filesystems -> Volume Groups" subarea, the boot
information is lost.
JAGae76847) SAM fails to power off the OLAR-able slot for
2-port cards when the driver is suspended. The
scenario is as follows:
Enter "SAM -> Peripheral Devices ->
Cards" subarea. Select
one of the A5159B/A5838A/A6826/A7011/A7012/
A9782/A5506B cards,and select the "Replace" menu
item under the "Actions" menu. After the CRA is
completed with no errors, click OK. On the
"Replace Cards" window, click "Cancel" to stop
the card replacement. This suspends the driver
and switches the slot power off. Run the
command rad -i <slot no> to switch the slot
power ON.
Now, the menu item to switch the slot power OFF
is displayed under the "Actions" menu. Select
the "slot power OFF" menu item, the following
error message is displayed:
----------------------------------------------
Cannot get information about ports associated
with I/O slot <x-x-x-x>
----------------------------------------------
JAGae77394) SAM incorrectly updates the file /etc/dhcptab
if the start and end address for an entry is
the same in the "Reserved Address in Address
Pool" screen in the following scenario:
Enter "SAM -> Networking and Communications
-> Bootable Devices -> DHCP Device Group
Booting from this Server" subarea, select the
"Add DHCP Group" menu item from the "Actions"
menu. In the "Add DHCP Group" screen, select
"Subnet Address Pool -> Reserved Address".
JAGae78333) Under certain conditions,
/usr/sam/bin/samlog_viewer(1M) may not operate
properly.
JAGae78372) On entering "SAM -> Networking and
Communications -> Bootable Devices -> DHCP
Device Group Booting from this Server" subarea,
SAM exits with the following error message:
----------------------------------------------
UNEXPECTED EXIT: process LANG=C LC_ALL=C
/usr/sam/lbin/samx -c -n -p
4560 -s bootp_sa_dhcp_groups
/usr/sam/lib//boot.us exited with a non-
zero exit status.
sh: 4643 memory fault(coredump)
----------------------------------------------
When SAM is used to manage DHCP pools, one can
specify IP addresses or ranges of IP addresses
to exclude from the pool. The error message is
displayed if the exclusion list is more than
4096 bytes.
JAGae80232) Under certain conditions, restricted SAM may
not operate properly.
JAGae83077) SAM does not recognize the virtual array
business copy (BC) LUNs and are displayed as
"Unused" disks on entering "SAM -> Disk and
Filesystems-> Disk Devices" subarea. It has
to mark the business copy LUN so that it is
not considered for configuration.
JAGae83345) On entering "SAM -> Disks and Filesystems ->
Disk Devices" subarea and on selecting a
virtual array, SAM displays the following
invalid menu items under "Disk Array
Maintenance":
Modify Array Configuration
Rebuild Data on Failed Disk Module...
Fix Parity Inconsistencies...
JAGae84199) A non-existent hardware path entry is displayed
on a system configured with a VA74XX family disk
array on entering the "SAM -> Peripheral
Devices -> Cards" subarea.
JAGae85656) When /usr/sam/lbin/ioparser.sh is used to list
all interface cards on the system, the
Intelligent Platform Management Interface
(IPMI) controller device is also listed. This
is incorrect as the IPMI Controller device is
not technically a card.
JAGae86120) When the FC60 LUNs report the world wide
identifier of NAA16 disks, SAM does not display
the number of paths and LUNs correctly in the
"SAM -> Disks and File Systems -> Disk Devices"
subarea.
JAGae87868) When a user's UID is shared with more than a
hundred users, SAM displays jumbled-up strings
of user names.
JAGae89490) On a system with Securepath software installed,
"SAM -> Disk and FileSystems -> Disk Devices"
subarea does not display the number of paths
for EVA HSV110 disk array correctly.
JAGae92769) Enter "SAM -> Peripheral Devices -> Cards"
subarea, select a card and choose the "Replace"
menu item from the "Actions" menu. Replace it
with a dissimilar card, SAM correctly displays
the following error message:
----------------------------------------------
"OLRAD error: Unable to resume the driver(s)
(hardware path)"
----------------------------------------------
However, the slot power is left ON and the new
dissimilar card comes up as CLAIMED and is
displayed in the "Cards" subarea.
JAGae93146) SAM and doorbells behave differently in the
situation when online replacement of a card
with a dissimilar card fails in the following
scenario:
Enter "SAM -> Peripheral Devices -> Cards"
subarea, select a card and choose the "Replace"
menu item from the "Actions" menu. When an
action is performed to replace a card with a
dissimilar card, the replace action fails and
SAM leaves the affected slot powered ON. If the
same operation is performed using doorbells,
the slot will be in powered OFF state.
JAGae93152) On a system that supports shared slots, the
slot power ON operation may fail due to bus
frequency or bus mode mismatch. SAM does
not indicate this to the user in the following
error message:
-------------------------------------------
OLRAD Error: General Error
-------------------------------------------
The scenario is as follows:
Enter "SAM -> Peripheral Devices -> Cards"
subarea, select a card whose slot is powered
OFF and try to bring it online by choosing the
"Bring Online" menu item in the "Actions" menu.
JAGae98452) When the FC60 LUNs report the world wide
identifier of NAA16 disks, SAM does not display
the number of paths and LUNs correctly in the
"SAM -> Disks and File Systems -> Disk Devices"
subarea.
JAGaf06223) On entering "SAM -> Networking and
Communications -> Hosts -> Local Hosts File"
subarea, SAM exits with the following error
message:
-------------------------------------------
UNEXPECTED EXIT: process LANG=C LC_ALL=C
/usr/sam/lbin/samx -C -n -p 17908 -s
hosts_init_file /usr/sam/lib//hosts.ui exited
with a non-zero exit status.
sh:18025 Bus error(coredump).
-------------------------------------------
JAGaf07880) SAM allows the GID of the special system group
"nogroup" to be modified in the following
scenario :
Enter "SAM -> Accounts For Users and groups
-> Groups" subarea and select the group
"nogroup". Choose the "Modify" menu item from
the "Actions" menu and change the value in the
field "Group Id".
JAGaf08764) SAM does not correctly display all the
interfaces present on the system when an IHV
NIC card is installed on the system and IHV's
configuration file is not present on the system
in the following scenario:
Enter "SAM -> Networking and Communications
-> Network Interface Cards" subarea.
JAGaf14390) On entering "SAM -> Disk and File systems
-> File systems" and "SAM -> Networking and
Communications -> Network File systems
-> Mounted Remote FileSystems" subareas, SAM
exits with a memory fault. This error occurs
if the size of the automounter map is larger
than 4096 bytes.
JAGaf14809) SAM incorrectly displays the value of the "Flow
Control" field for gelan, igelan and iether
cards as 'ON' in the following scenario:
Enter "SAM -> Networking and Communications
-> Network Interface Cards" subarea. Select an
gelan, igelan or iether card and select the
"Modify" menu item from the "Actions" menu. In
the "Configure LAN Card" screen, select the
"Advanced Options" button. In the "Advanced
Options" screen, set the "Flow Control" field
to OFF, exit the "Advanced Options" screen and
again go to the "Advanced Options" screen.
JAGaf23910) IP logical interfaces cannot be configured
from "SAM -> Networking and Communications ->
Network Interface Cards" subarea.
PHCO_28123:
JAGae42959) SAM does not support the IETHER LAN card
with MTU range 257-9000.
JAGae63466) SAM does not recognize the following new
hardware devices:
Dual port PCI-X 2 Gb/1Gb Fibre Channel Host
Bus Adapter (Product# A6826A)
EVA GL - HSV110
EVA GL Lite - HSV100
SA5304/256 4 Port RAID HBA - (Product #: A7143A)
PCI-X 2 Gb Fibre Channel 1Gb Ethernet Combo
Card - (Product #: A9782A)
PCI-X 2-Ch Ultra320 SCSI Adapter
(Product #: A7173A)
PCI 4-channel RAID160 SA SCSI Adapter
(Product #: A7143A)
PCI-X 2Gb Fibre Channel/1000Base-T HBA
(Product #: A9784A)
PHCO_27374:
JAGad91701) On entering SAM -> Disks and File Systems ->
File Systems -> Actions -> Add Remote File
System -> Using the NFS Automounter, enter the
required information in the "Add Automounted
Remote File System" screen and choose OK.
In the "File Systems" screen, select a NFS file
system and choose Actions -> Remove menu item.
The following error message is displayed.
----------------------------------------------
parse_nsswitch: Couldn't open file,
'/etc/nsswitch.conf'
parse_nsswitch: Couldn't find server,
'automount'.
-----------------------------------------------
JAGad94311) Information related to the usage of "Software
Distributor" using restricted SAM is not
provided in the SAM manpage.
JAGae12442) On entering SAM -> Bootable Devices -> Fixed-
Address Devices Booting From this Server ->
Actions -> Add Fixed-Address Device, in the
"Add Fixed-Address Device" window, enter the
required information and leave the "Station
Address" field blank. Choose OK. SAM displays
garbled value for the "Station Address" field.
JAGae18088) SAM does not support the configuration of FDDI
interfaces with IPv6 addresses.
JAGae23125) SAM performs an ioscan(1m) when it is launched
by a user having restricted access to "Users
and Groups" and "Auditing and Security"
subareas.
JAGae24469) SAM does not provide the system administration
functionality for iSCSI device identification
for static discovery,kernel build, and device
recognition from ioscan(1m) output.
JAGae29286) On entering SAM -> Networking and
Communications -> Network Interface Cards
subarea, many files remain in the /var/tmp file
after SAM networking functions are run.
JAGae36062) On entering SAM -> Networking and Communications
-> Network Interface Cards, and on choosing the
"Configure" or "Modify" menu item from the
Actions menu, SAM displays incorrect duplex
value for the chosen interface.
JAGae36972) When a system administrator modifies or deletes
a user, SAM does not update the ownership of
symbolic links. The symbolic link retains
the previous uid and may cause confusion in the
future.
JAGae37625) On entering SAM -> Networking and Communications
-> NIS+ -> NIS+ Tables. Using Actions -> Change
Domains, change the domain from home domain to
sub domain and add a user with add entry within
Modify Password Table entry. After entering the
required information, SAM displays a message to
modify the credentials table if a user requires
full access privileges. Select a user to add
credentials for the home domain and choose
Apply. The following error message is displayed.
--------------------------------------------
Non-root users have DES credentials only in
their home domain. The cred table you are
modifying is from sub.rose.hp.com and this
user's home domain is rose.hp.com.
--------------------------------------------
JAGae41071) On entering SAM -> Accounts for Users and Groups
-> NIS+ Users subarea, choose the "Add" menu
item from the "Actions" menu. SAM fails to
create the home directory for a new NIS+ user
when the "Create Home Directory" option is
checked in "Add a User Account" window.
JAGae41719) On entering SAM -> Networking and Communications
-> DNS (BIND) -> DNS Local Name Server subarea,
the following error message is displayed
even though the system is setup as a
DNS name server and is working properly.
----------------------------------------------
This system is not configured as a primary or
secondary DNS name server.
----------------------------------------------
Moreover, SAM does not display the contents of
the file /etc/named.conf.
JAGae44447) On entering SAM -> Networking and Communications
-> NIS+ -> NIS+ Tables subarea, select the
passwd/trusted table, and select an entry.
Choose the "Modify" menu item from the "Actions"
menu. SAM displays a screen titled "Modify
passwd / trusted table entry".On selecting
"passwd table shadow column" on this screen,
SAM displays incorrect password aging fields.
Also, SAM incorrectly updates passwd format
policy and time of the day fields in the
trusted table.
JAGae44448) On entering SAM ->Networking and Communications
-> NIS+ -> NIS+ Tables subarea, select the
trusted table and then select an entry. Choose
the Modify menu item from the Actions menu. SAM
displays a screen titled "Modify trusted table
entry". On this screen, if a user selects "View
local System default",a bus error is displayed.
JAGae44475) Upon entering the "Disk Devices", "File
Systems" , "Logical Volumes", "Swap", or
"Volume Groups" area from the "Disks and
File systems" area, the following incorrect
message is displayed while the area is being
initialized:
---------------------------------------------
Warning, using a maximum swap space of "0"
can be risky. A maximum of zero allows the
system to use all available space in the file
system for swap space. This could result in the
file system becoming full and unusable.
------------------------------------------------
The correct message that should be displayed is:
----------------------------------
Scanning the system's hardware...
----------------------------------
JAGae44485) On entering SAM -> Disks and File Systems ->
File Systems subarea, choose VxFS Maintenance->
Upgrade VxFS from the "Actions" menu. The
upgrade process from VxFS file system layout
version 3 or earlier to version 4 does not work
correctly.
JAGae45106) On system boot, the following message is
displayed due to a inittab failure:
----------------------------------------------
INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id:samd "/usr/sam/lbin/samd # system mgmt
daemon"
----------------------------------------------
JAGae47367) In a scenario where there are more than 500
users in restricted SAM, when a user specifies
a hyphenated user name in the "Select a User"
text field (Load Privileges window), the
following error message is displayed:
----------------------------------------------
The information entered in the Select a User:
field is not valid. After exiting this message,
press Help on Context (F1) for more information
about the field's requirements.
----------------------------------------------
JAGae50036) Any local printer with a non-standard device
file /dev/null is displayed as network printer
by SAM.
JAGae51077) When a third party tool, namely ISEE Platform,
calls the SAM binary, /usr/sam/lbin/getkinfo,
using the commands-
/opt/hpservices/RemoteSupport/bin/RunMap
-n MapContent.
GeneralSystemInfo -a AdrX -pd PDdrX
or
/opt/hpservices/RemoteSupport/bin/RunMap -n
MapContent.ComprehensiveSystemInfo -l -a AdrX
-pd PDdrX,
the logfile from the application returns the
following error message to the logfile of the
ISEE Platform.
--------------------------------------------
THIS SCRIPT IS BEING RUN WITH USER ID
(id -u) = 0
EXECUTING /usr/sam/lbin/getkinfo -b -o
/var/opt/hpservices/tmp/872/getkinfo_b_o.
sh.stdout.022633115707
WARNING: COMMAND /usr/sam/lbin/getkinfo -b -o
/var/opt/hpservices/tmp/872/getkin
fo_b_o.sh.stdout.
022633115707 RETURNED A NON-ZERO
RETURNCODE: 139. CHECK THE STDERR SECTION OF
THIS COMMANDS XML OUTPUT FOR FURTHER DETAILS.
---------------------------------------------
JAGae52602) SAM does not recognize the following new
hardware devices:
HLDS GDR-8161B ATAPI DVD-ROM/CD-ROM Reader
(Product#:A8068A)
LITE-ON LTR-48126S ATAPI CD-RW DRIVE
(Product #:A7853A)
TEAC DW224E-B ATAPI DVD-ROM/CD-RW COMBO (slim)
(Product #:A8070A)
10/100BT PCI Single Port card
(Product #:A6974A)
Fibre Channel Disk Array VA7110
(Product #:A6189B)
CD-RW Drive
(Product #:A7853A)
HP Ultrium 460 External Drive
(Product #:Q1509A)
HP Storageworks SDLT 160/320 GB Tape Drive
(Product #: 257319-B21)
JAGae52903) On entering SAM->Networking and Communications
-> Network Interface Cards subarea, select an
IPv4 interface and choose "Configure/Modify"
menu item from the Actions menu. A screen
titled "Configure lan card" is displayed. On
this screen, when a user specifies IP address,
host aliases, comments and selects the OK
button, SAM does not update the host details
in the "/etc/hosts" file.
JAGae55289) On entering SAM -> Performance Monitors ->
System Properties subarea, the page size is
displayed as zero in the Memory and Dynamic
tabs.
JAGae55293) After applying any SAM 11.11 patch, any
template files that have been created under the
Users and Groups subarea is truncated to zero
bytes.
JAGae55296) SAM does not display cron(1m) jobs starting with
a '#' (comment character). SAM incorrectly
displays cron(1m) jobs if the description
field contains a '#' character.
JAGae55744) For iSCSI targets, SAM -> Disk and File Systems
-> Disk Devices subarea does not display the
alternate paths correctly.
PHCO_26382:
JAGab31984) In SAM -> Performance Monitors -> System
Properties subarea, SAM online help for virtual
memory makes reference to "pseudo-swap" which
is incorrect.
JAGad54903) In SAM-->Networking and Communications -->DNS
--> "Set Default Domain", the window is closed
with the error, "You have both Domain and Search
entries in your /etc/resolv.conf file. Only one
is allowed at a time". SAM should not exit
after the error message but should continue to
function.
JAGad67008) In SAM -> Kernel Configuration -> Configurable
Parameters subarea, SAM online help shows
incorrect maximum value for the kernel
parameters, "nkthread" and "max_thread_proc".
JAGad76934) In SAM (TUI mode) -> Kernel configuration -->
Configurable Parameters subarea, select the
parameter "num_tachyon_adapters". Select Help.
Information on the kernel parameter is displayed
but in the "See Also" section, an invalid link
is displayed.
JAGad82527) Context-sensitive help for "IPv6 address" and
"prefix" fields in SAM is not available.
JAGad82530) In SAM-->Network and Communications --> Network
Interface Cards subarea, on selecting the
"Configure" menu item in the "Action" menu, SAM
takes a long time to autoconfigure the IPv6
interface ( after highlighting an IPv6 interface
) takes too long.
JAGad83870) In SAM -> Kernel Configuration -> Configurable
Parameters subarea, SAM online help shows
incorrect default value for the "strmsgsz"
kernel parameter.
JAGad85934) Intrusive IPv6 related message in NIS, NIS+ and
DHCP subareas of SAM. The message displayed is
"SAM does not support V6 configuration"
JAGad90126) In Network File System--> Mounted Remote File
system subarea, SAM displays the following error
message if the "/etc/auto_master" file contains
"Proto=tcp/udp" option for a remote file system.
------------------------------------------------
Error: "/usr/sam/lbin/autoopt: Problem parsing
master automounter file "/etc/auto_master".
-----------------------------------------------
JAGad95373) In SAM-->Networking and Communications-->
Network Interface Cards-->Modify System Name
subarea, the modified system name is not
reflected in the files /etc/hosts and
/var/adm/inetd.sec.
JAGad99645) In SAM -> Kernel Configuration -> Configurable
Parameters subarea, SAM Online help displays
incorrect maximum value for the "maxusers"
kernel parameter.
JAGae03470) SAM disables IPv6 interfaces whenever IPv4
interfaces are configured.
JAGae09404) SAM core dumps in SAM -> Kernel Configuration ->
Configurable Parameters subarea, on a system
which has been upgraded from 10.20 to 11.11
using the 'update-ux' tool.
JAGae12800) The shell script 'get_sdm_info' which is used to
obtain information about HP surestore disk array
,uses C style comments
JAGae13332) In SAM -> Kernel Configuration -> Configurable
Parameters subarea, SAM online help displays
incorrect description for the minimum, maximum
and default values of "maxdsiz", and
"maxdsiz_64" kernel parameters
JAGae13380) On a system with large number of processes, SAM
fails to complete the replace operation for an
OLAR-based network card, and core dumps.
JAGae16035) A cron job containing "#" symbol is not
displayed properly under SAM -> Process
Management -> Scheduled Cron Jobs subarea.
JAGae16430) a) When a large string is passed as command
line argument to the "-K" option for
"/usr/sam/lbin/rsam", "rsam" aborts with a
memory fault.
---------------------------------------------
$/usr/sam/lbin/rsam -K "`cat /etc/services`"
Memory fault
---------------------------------------------
b) Some SAM binaries contain embedded compile
time library paths.(e.g.,/usr/sam/lbin/samx)
JAGae18085) SAM should support configuration of multiple
default gateways.
JAGae18267) SAM gives error in the absence of .rhosts and
hosts.equiv files on the system, in rlogin
functional area.
JAGae18336) Guardian Service Processor in now known as
"Service Processor" on Partitionable systems.
SAM has to be updated to reflect the change.
JAGae18521) Whenever an IPv6 address is added to the
/etc/hosts file, there should also be an option
to configure its route.
JAGae19343) In SAM -> Printers and Plotters ->LP Spooler ->
Printers and Plotters subarea,if a user tries to
remove a network printer, the following error
message is displayed
---------------------------------------------
Lp destination <printername> does not exist
on <hostname>
----------------------------------------------
JAGae19866) From SAM -> Auditing and Security ->
Authenticated Commands, on entering any subarea
, select Actions -> Modify menu item. In
the "Modify an Authenticated Command"
window, from the Add-on list,select a module
whose "Auth Order" is "Not Used". Also,let
the value of "Authentication Order" remain
as "Not Used". Select the Modify button, and
click on the OK button.The following error is
displayed:
---------------------------------------------
UNEXPECTED EXIT: process LANG=C LC_ALL=C
/usr/sam/lbin/samx -C -p 21683 -s ts_pam_act_sa
/usr/sam/lib//ts_pam.ui exited with a non-zero
exit status.
sh: 21775 Bus error(coredump)
---------------------------------------------
JAGae21743) In SAM-->Network and Communications -->Network
Interface Cards subarea, when a user modifies
any of the attributes of a card (through modify
menu item), SAM incorrectly updates the
/etc/hosts file.
JAGae21919) Under SAM ->Peripheral Devices ->Cards subarea,
"Show/Create Device Files" action(s) fail for
igelan,gelan cards.
JAGae26582) In Time->NTP Broadcasting subarea, when a user
selects the "Modify" action item, SAM displays
the following error message:
"A sam INTERNAL ERROR has occurred!
UILIB ERROR: ui_sel_item_name() returned
UILIB_FIELD_NOT_FOUND Arguments were:
field_name: "auth_key_nums" "
JAGae28247) SAM needs to recognize the following new
hardware devices:
HLDS GDR-8160B ATAPI DVD-ROM/CD-ROM Reader
(Product #A8068A)
HLDS 40x CD-RW drive (ATAPI)
HLDS 48x CD-Rom drive (ATAPI)
A6828A:PCI Single Channel Ultra160 SCSI Adapter
A6829A:PCI Dual Channel Ultra160 SCSI Adapter
A6825A,A6847A,A6794A:PCI/PCI-X GigEther Cards.
A7008A:10/100BT PCI Single Port card
A7789A: Fire GL 2.8 Graphics Card.
JAGae29049) SAM should be enhanced to support VxVM 3.5.
JAGae29256) SAM does not restore the BSD printer attribute
on restoring the print spooler configuration.
PHCO_25870:
JAGad04345) When removing a user/group, SAM invokes the
"find" command with wrong options to remove the
user file(s). This causes "find" to traverse
all NFS file systems and the process takes a
very long time to complete.
JAGad82014) SAM-NNC should be enhanced to support
configuration of Virtual LAN (VLAN) interfaces.
JAGad85391) SAM dumps core when a user enters the Logical
Volume (LV) dialog, or tries to obtain more
information on an LV that has 120 (or more) EMC
disks assigned to it.The error message displayed
is as shown below:
------------------------------------------------
UNEXPECTED EXIT: process
/usr/sam/lbin/samx -C -p 16090 -s fs_sa_vg /usr
/sam/lib//fs.ui
exited with a non-zero exit status
-----------------------------------------------
JAGad88251) SAM is unable to define logical volume(s) while
creating volume group on an FC-60 disk array in
dual configuration mode. The error message
displayed is as shown below:
-----------------------------------------------
UNEXPECTED EXIT: process /usr/sam/lbin/samx -C
-p 11748 -s fs_sa_vg /usr/sam/lib//fs.ui exited
with a non-zero exit status
sh: 12154 Abort(coredump)
-----------------------------------------------
JAGad92425) When creating user accounts, SAM does not
maintain the permissions of the files that are
copied from the /etc/skel directory to the
users' home directory.
JAGad92432) SAM fails to trim the /etc/rc.log file. The
error message displayed is as shown below:
------------------------------------------------
An error occurred after the trim while trying to
save the remaining log information to the file
"/etc/rc.logSAMTRM". You should examine this
file to see if its contents are correct.
------------------------------------------------
JAGad96187) On a system with large number of unused disks
with old serial numbers, SAM core dumps upon
entering SAM -> Disks and File Systems Subarea.
The error was detected on a customer system
with a newly installed XP512 disk array (using
73 GByte disks) and a SEAGATE ST34573WC 4G HD.
The error message displayed is as shown below:
------------------------------------------------
UNEXPECTED EXIT: process LANG=C LC_ALL=C /usr/
sam/lbin/samx -C -p 11721 -s fs_sa_vg /usr/sam/
lib/fs.ui exited with a non-zero exit status.
sh: 11827 Memory fault (core dump)
------------------------------------------------
JAGae04863) On entering the SAM->Networking and
Communications-> Network Interface Cards sub-
area, and if a user tries to modify a logical
interface, the Advanced Options screen is
either blank or incomplete.
JAGae05752) On selecting SAM -> Disks and File Systems ->
File Systems ->Actions -> Run VxVM Storage
Administrator, SAM exits from the file system
section after logging the following message in
samlog:
------------------------------------------------
The DA field name, "FS_VG_NAME", was not found
in the SAM class registration database.
Location: da_handle.C:957 Error Code: 1370
------------------------------------------------
JAGae09717) SAM has to recognize the following new hardware
devices:
HP Surestore Virtual Array VA7405
(Product#:A6189B)
HP Surestore Virtual Array VA7410
(Product #:A6218A)
HP Surestore Disk System 2300 (Product #:A6491A)
HP Surestore Disk System 2405 (Product #:A6255A)
DVD-ROM Drive (slim) (Product #:A8069A)
DVD-ROM/CD-RW Drive Combo (slim)
(Product #:A8070A)
DVD-ROM Drive (Product #:A8068A)
CD-RW Drive (Product #: A7853A)
The DVD-ROM/CD-RW Drive Combo (A8070A)
and CD-RW Drive (A7853A) will be recognized
as read-only devices.
PHCO_24118:
JAGad24679) In SAM->Time, if a user enters any of the
sub-areas (NTP Broadcast, NTP Network
Time Sources, or System Clock) and executes
any of the actions items, the operation
completes successfully but a core dump occurs.
JAGad88726) After a new disk has been initialised
and added to a new disk group (not a
pre-existing disk group) using the
vxdiskadm user interface, SAM dumps
core upon entering the Disks and FileSystems ->
Disk Devices, Logical Volumes or
Volume Groups sub-areas.
JAGad91062) In SAM->Networking and Communications->Network
Interface Cards sub-area, if a user wants to
configure or modify an interface and assigns
an IP address which is already in use, the
warning message:
"ifconfig: ipaddress already in use"
is not displayed.
JAGad91065) In SAM->Networking and Communications->Network
Interface Cards sub-area, if the user
configures a SNAP interface, the lan interface
is not displayed.
JAGad91777) In SAM->Networking and Communications->Network
Interface Cards sub-area, while modifying an
IPv4 interface in the Advanced Options screen,
the IP Broadcast Address field is invisible.
JAGad92839) In SAM->Networking and Communications->Network
Interface Cards sub-area, while configuring
or modifying an interface, changes made to the
driver parameters for that interface are not
updated until the system is re-booted.
JAGad93389) In SAM->Networking and Communications->Network
Interface Cards sub-area, the on-line help
contains no information on IGELAN cards.
JAGad93746) In SAM->Networking and Communications->Network
Interface Cards sub-area, if user has opted to
auto-configure an IPv6 interface, the user
does not have an option to cancel
auto-configuration.
JAGad94227) In SAM->Networking and Communications->Network
Interface Cards sub-area, if the user wants to
configure an IP Logical Interface, upon
configuring the interface, the following
error is displayed:
Error (hd0600)
ERROR: lan 2 interface | PPA 2 : btlan3:
ERROR: Setting
100000000 is unsupported
Valid types: 10HD, 10FD, 100HD, 100FD, AUTO_ON
Old Station Address = 0x00108327b5b5
New Station Address = 0x00108327b5b5
JAGad94344) In SAM->Networking and Communications->Network
Interface Cards sub-area, when an IPv6
interface is deleted, the entry from the
driver-specific configuration file is also
deleted regardless of the IPv4 interface status
and vice-versa.
JAGad95592) In SAM->Networking and Communications->Network
Interface Cards sub-area, whenever a SNAP
interface is configured, an additional entry
is added to the driver specific configuration
file apart from the lan entry for that
interface.
JAGad95619) SAM does not support the configuration of the
Next Generation Gigabit Ethernet Card (IGELAN).
JAGad96980) In SAM->Networking and Communications->Network
Interface Cards sub-area, while configuring or
modifying Next Generation 1000-TX card,
the values for the send max buffers, receive
max buffers, send coal ticks, receive coal
ticks driver variables are set incorrectly.
JAGad97766) The new drivers gvid, gvid_core and igelan
are not recognised by SAM.
JAGad98158) The new driver func0 is not recognised by
SAM.
PHCO_23841:
JAGaa61081) lpmgr limits the number of printers to 1024.
JAGaa61090) If a user is removed from the system and has
restricted SAM privileges, the privileges are
not removed. If a new user is added with the
same name, the new user may inadvertently
receive the previous user's privileges.
JAGaa61232) /var/sam/lock should not be world-writable.
JAGaa93220) SAM limits size of AutoRaid LUNs to
99,999 MB.
JAGab31980) When attempting to modify a network
file system, the following error
message is displayed:
The command used to mount the new file
system, mount(1m), has failed to mount
/test. The stderr output from the
command is show below.
nfs mount: illegal file system specific
option: nolargefiles
usage: mount [-l][-v|-p]
mount [-F FStype][-eQ] -a
mount [-F FStype][-eQrV][-o specific_options]
{ special | directory }
mount [-F FStype][-eQrV][-o specific_options]
special directory
JAGab77793) SAM -> Performance Monitors ->
System Properties -> Networking
In this screen, SAM should display
information about the primary LAN card
(the one mapped to the host's IP
address). Instead, it may display
information about another card.
JAGad04236) SAM cannot recognize or configure ATM cards.
JAGad33763) Upon entering the Networking and Communications
->Name Service Switch sub-area, the main
screen displays garbage characters in the
"Other" field.
JAGad36111) If syscall auditing is enabled / disabled,
it takes effect only while the auditing
subsystem is up. But if auditing is
stopped and restarted through
/sbin/init.d/auditing (either manually,
or from a reboot), these changes are lost.
JAGad38555) SAM -> Networking and Communications ->
Hosts -> NIS Hosts Map.
It takes an excessively long time to
enter the NIS Hosts Map display.
JAGad41974) When you try to reactivate a user on an
11.11 NIS+ Trusted System, you receive the
following error:
-------------------------------
ERROR. There was an unknown error in
"/usr/lbin/getprpw". The output from this
command was: Unknown domain . :Not Found,
no such name. Failed to read the protected
password database for the user "username".
-------------------------------
JAGad48366) There is a general problem when modifying
a dynamic tunable which itself depends upon
certain relationships with static tunables.
For example, a change to a dynamic tunable
sometimes can't be made because it depends
on the value of a static tunable. This
creates a situation that cannot be resolved
within SAM.
JAGad50640) When a disk array is connected through two
interfaces, SAM does not recognise both of
them during OLR (replace) operation and
reports single point of failure.
For example, if the disk array is connected
through the A5158A FC card, during an OLR
(replace) operation SAM reports single
point of failure.
JAGad51240) Some card-level SAM analysis is incorrect
or incomplete for the PCI RAID 4Si card.
Peripheral Devices -> Cards -> Actions ->
Analyze Critical Resources
This is the output for the above menu path:
Critical Resource Analysis for slot 10:
Warning: Affected resources are in use.
Affected cards or ports:
0/3/0/1 : HP A5856A RAID 4Si Card
0/3/0/1.0 : I2O Block Storage
----------------
Analysis Details
----------------
No mass storage ports were evaluated.
----------------
No network ports were evaluated.
----------------
Warning: One or more of the affected ports
has a class type that cannot be evaluated.
Ports with class types that cannot be evaluated:
0/3/0/1
0/3/0/1.0
----------------
JAGad53451) New PCI Ultra160 SCSI cards A6828A and
A6829A are not supported by SAM.
JAGad53667) The following models are not recognized in the
SAM System Properties area:
9000/800/N4000-6X
9000/800/L1500-6x
9000/800/L3000-6x
As a result, messages like the following are
produced:
-------------------------------
Model N4000-6X not found in the models database
/usr/sam/lib/mo/sched.models or the file was
missing.
-------------------------------
and
-------------------------------
Previous messages indicate that one or more
errors occurred in an attempt to retrieve
mo_sv_proc_sg information.
-------------------------------
JAGad54252) SAM -> Disk and Filesystems -> Swap.
An attempt to add or remove file system
swap produces the following message:
-------------------------------
UNEXPECTED EXIT: process /usr/sam/lbin/samx
-C -p 3411 fs_sa_swap /usr/sam/lib//fs.ui
exited with a non-zero exit status. sh: 3959
Bus error(coredump)
-------------------------------
JAGad54660) Networking and Communications ->
Bootable Devices -> DHCP Device Groups
Booting From this Server.
SAM does not display the first pool group
in the /etc/dhcptab file.
JAGad54901) Networking and Communications ->
Network File Systems -> Actions ->
Disable NFS Server.
The status of the NFS Server is not
changed to "NFS Disabled".
JAGad55753) Even after a user is reactivated in SAM,
the Users & Groups Actions menu still
displays the "Reactivate" menu item.
JAGad56161) When the on-line help is requested in areas
TIME and NFS, SAM gives an error:
/usr/sam/help/C/nnc.hv file does not exist.
JAGad62102) When trying to remove a user, if the
pre-remove script fails, SAM still deletes
the files belonging to that user.
JAGad63742) On a system with VxVM installed, a user
enters SAM's Disk and File Systems ->
Disk Devices and SAM core dumps.
JAGad63942) Upon entering SAM -> Peripheral Devices ->
Uninterruptible Power Supplies produces
the following message when no UPS
is configured:
------------------------
UNEXPECTED EXIT: process
/usr/sam/lbin/samx -C -p 8895
/usr/sam/lib//pd.ups.ui exited with a
non-zero exit status.
sh: 9378 Bus error(coredump)
------------------------
JAGad64120) SAM does not give a "Mount" action in the
Disks and File Systems -> Disk Devices
sub-area for a CD-ROM drive.
JAGad66450) SAM -> Peripheral Devices -> Cards:
In some cases, on L class machines, SAM
responds with an error dialog "Scanning
the System's Hardware Failed"
for btlan, btlan3 and gelan cards.
JAGad68820) Enable SAM-NNC to support IPV6.
JAGad69240) When a system is not listed within SAM's
/usr/sam/lib/mo/sched.models file, the
following messages are produced:
-------------------------------
Model C3600 not found in the models database
/usr/sam/lib/mo/sched.models or the file was
missing.
-------------------------------
and
-------------------------------
Previous messages indicate that one or more
errors occurred in an attempt to retrieve
mo_sv_proc_sg information.
-------------------------------
JAGad69244) SAM -> Backup and Recovery ->
Interactive Backup and Recovery:
If a tape drive is not listed in the
pd_devinfo.tx file, the following
message is displayed upon entry:
-------------------------------
A SAM internal error has occurred:
The error handler has gotten the error
code 1 of type NOTE with the associated
strings: 10/12/5.0.0 HP C1537A.
-------------------------------
When a tape library is not listed within
the /usr/sam/lib/C/pd_devinfo.tx file,
it is incorrectly identified as a MOAC
(magneto-optical autochanger) by SAM.
JAGad69376) The new PCI Tachyon XL2 FC Adapter A6826A
is not supported in SAM.
JAGad69400) SAM does not allow the user to configure the
UPS shutdown delay and timeout to values
greater than 15 minutes.
JAGad70436) Upon entering the Networking and Communications
-> NIS+ -> Actions menu, the "Change Domain"
item is not visible.
JAGad71058) SAM cannot decrease the value of some kernel
parameters which are dynamic in nature only
when their values are decreased.
For example, if the value of semmsl is
decreased, SAM returns the following message:
----------------------------------------
The attempt to set parameter "semmsl" to
value/formula "2050" has failed. The stderr
output from the kmtune command is shown below:
kmtune: Unable to change semmsl. Out of range.
----------------------------------------
JAGad71372) IPV6 support: The main screen of the Name
Service Switch area in SAM displays this
error:
----------------
ui_switch_group() returned
UILIB_FIELD_NOT_FOUND
----------------
JAGad71571) After configuring an interface, SAM displays
the following error on exit:
----------------
NNC_ROUTE_GETBYDESTV6 could not be found.
----------------
JAGad73881) If PHCO_23004 is installed and an executable
named "id" exists in the path (specified by
$PATH) before /usr/bin, then the following
message is displayed on entering SAM:
------------------------------------
Restricted SAM cannot be run as root.
------------------------------------
JAGad76443) When adding a logical volume with striping,
SAM does not allow a stripe size greater than
64KB, but the maximum size supported is
32768KB. SAM presented the following choices:
4,8,16,32,64 (sizes in KB for stripe size).
JAGad77174) While accessing an Optimus (A5277A) array using
SAM, the temporary files created (by SAM) in
/var/sam are not removed.
JAGad78532) SAM failed to add a host name alias to the
/etc/hosts file for all the IPV6 gelan
interfaces.
JAGad78713) Incorrect interface status and internet
address are displayed after "Delete" operation
in SAM.
JAGad79129) Modifying an IPv6 interface with an incorrect
prefix disables the interface.
JAGad80828) SAM has an option to upgrade a VxFS filesystem
from version 2 to version 3, but there is no
option to upgrade from version 3 to version
4 if version 3.3 is installed.
JAGad80940) An entry in the /etc/hosts file separated by
tab cannot be removed by SAM.
JAGad81209) New PCI/PCI-X GigEther cards A6847A, A6825A,
and A6794A are not supported by SAM.
JAGad82199) If a printer has been configured as a
login terminal, then on entering the
Printers and Plotters ->LP Spooler ->
Printers and Plotters sub-area,
the following message is displayed:
-----------------------------------
"Unexpected error with data, no printers
found".
-----------------------------------
JAGad82215) An attempt to use SAM to add a non-existent
remote printer fails and the following message
is logged to the samlog file:
------------------------------
'lpmgr done, exit value is 5'.
------------------------------
JAGad82384) SAM displays the following error message when
the Advanced option is used in configuring a
card.
-----------------------------------------------
A sam INTERNAL ERROR has occurred!
UILIB ERROR:
ui_invisible() returned UILIB_FIELD_NOT_FOUND
Arguments were:
field_name: "nnc_te_ibroad"
-----------------------------------------------
JAGad82502) Whenever an IPV6 address is configured for
an interface, an incorrect IPV4 address
also gets configured.
JAGad82511) For all non-ethernet devices an error message
is not displayed when IPV6 support is
not enabled for that device.
JAGad82670) SAM mis-identifies the HP A6189A SureStore
Virtual Array VA7400 as a VA7405.
JAGad83198) Upon entering the Networking and
Communications -> DNS -> DNS resolver
sub-area, the screen display is
incorrect if the /etc/resolv.conf file
contains tabs.
JAGad83399) The text message for OLA/OLR is unclear
and hard to read. The 2 LED states
in the OLR replace message are buried
in the message text and could easily
be missed by users scanning the message
instead of reading it closely.
JAGad84117) When entering Networking and Communications
-> Networked File Systems -> Mounted Remote
File Systems, the following message is
displayed:
UNEXPECTED EXIT: process LANG=C LC_ALL=C
/usr/sam/lbin/samx -C -p 7590 -s nfs_client
/usr/sam/lib//nfs.ui exited with a non-zero
exit status. sh: 8424
Memory fault(coredump)
JAGad85083) SAM allows only prefix 10 to be assigned
for V6 secondary interfaces.
JAGad85921) With IPV6 support in SAM, the System Clock
area cannot be used to configure the date and
time.
JAGad87813) The on-line help for the VxFSUpgrade feature
needs to be updated (refer to JAGad80828).
JAGad88429) If SAM is used to configure DHCP, the
configured DHCP groups are not visible in SAM.
JAGad88837) Whenever a configured interface is assigned
an IP address that is already in the use,
the existing configuration of that interface
is lost.
JAGad89885) SAM displays incorrect time during first
hour of the day.
JAGad89898) On HP-UX 11.11 0601 OEUR and later, if the
critical resource analysis is run from
Partion Manager (parmgr), parmgr crashes
with a stack corruption message. If SAM
11.11 LR version is installed, the task runs
correctly from parmgr. In both cases, the
task works correctly when run from within
SAM rather than from parmgr.
JAGad90894) SAM should support deletion of a disabled
physical interface.
JAGad91065) A network interface loses its address if a
logical IP address is added to it through SAM.
PHCO_23004:
JAGad40450) The following processors are not recognized
in the SAM System Properties area:
L1500-7x
L3000-7x
A400-7X
A400-8X
A500-7X
A500-8X
N4000-7X
N4000-8X
N4000-9X
As a result, messages like the following are
produced:
-------------------------------
Model L1500-7x not found in the models
database.
-------------------------------
and
-------------------------------
Previous messages indicate that one or more
errors occurred in an attempt to retrieve
mo_sv_proc_sg information.
-------------------------------
JAGad38933) SAM does not recognize the HP C7145/C7146
Autochangers as tape devices. Instead, SAM
incorrectly identifies them as Magneto-Optical
disk autochangers on the list of available
backup devices.
JAGad38934) SAM does not recognize the HP Surestore SDLT
220 tape drive on the list of available backup
devices.
JAGad46771) SAM does not support the new HP A6188A
(HP SureStore Virtual Array 7100) disk
array.
JAGad46036) The following processors are not recognized
in the SAM System Properties area:
L1500-8x
C3750
J6750
B2600
As a result, messages like the following are
produced:
-------------------------------
Model L1500-8x not found in the models
database.
-------------------------------
and
-------------------------------
Previous messages indicate that one or more
errors occurred in an attempt to retrieve
mo_sv_proc_sg information.
-------------------------------
JAGad45070) SAM -> Disks and File Systems ->
Disk Devices/File Systems/Swap
produces the following messages:
=================================
UNEXPECTED EXIT: process LANG=C LC_ALL=C
/usr/sam/lbin/samx -C -p 3265 -s fs_sa_disk
/usr/sam/lib//fs.ui exited with a non-zero
exit status.
cpp: "/usr/sam/lib/C/pd.com.ui", line 71:
error 4068: Missing comma separator between
parameters in macro "PD_ADD_TD".
cpp: "/usr/sam/lib/C/fs_ice.h", line 152:
error 4068: Missing comma separator between
parameters in macro "PB_TEXT".
cpp: "/usr/sam/lib/C/fs_ice.h", line 166:
error 4068: Missing comma separator between
parameters in macro "PB_TEXT2".
sam: Error: The cpp(1) command failed on file:
/usr/sam/lib/C/fs.ui.
=================================
JAGad31048) On a system using single disk HFS,
SAM offers to remove the LVM subsystem,
but the attempt to rebuild the kernel
without LVM fails with this output:
=================================
Cannot build a kernel using /usr/sbin/config.
The standard output of the command is shown
below:
/usr/ccs/bin/ld: Unsatisfied symbols:
lvm_readahead_info (data)
lvm_flush (data)
lvm_shutdown (data)
Stop.
config: make did an exit(1)
The command exited with exitcode -71.
=================================
JAGad44664) SAM does not properly identify Hitachi XP48
Array LUNs and does not subsequently collapse
multiple hardware paths to the same LUN. This
can cause alternate paths to these disks to
be marked as "Unused", allowing for data
corruption.
JAGad40249) When a system contains a large number of
physical volumes, SAM may generate the
following message when a user enters the
Disk Devices section of Disks and File
Systems area:
===============================
Unexpected exit process /usr/sam/lbin/samx
-C -p 13589 -s fs_sa_disk
/usr/sam/lib/fs.ui exited with a non-zero
exit status.
==================================
JAGad41974) SAM -> Accounts for Users and Groups ->
SAM NIS+ Users -> <Selected an NIS+ user>
-> Actions -> Modify Security Policies
This results in corruption of the NIS+ table
by omitting a trailing '.' on an entry in
the table.
JAGad41162) When multiple administrators concurrently
perform user creation or modification using
SAM, SAM may create users with the same UID
without displaying a warning message.
JAGad38331) When a SAM-configured PCI FDDI network card
is physically replaced with a new PCI FDDI
(or any other network card which is using the
same I/O slot) and deleted with SAM, the
replacement card erroneously assumes the MAC
address of the old NIC. This may result in
a non-functional network.
JAGad48165) The following processors are not recognized
in the SAM System Properties area:
9000/800/L1500-9x
9000/800/L3000-9x
9000/800/S16K-A
9000/800/N8K-A
As a result, messages like the following are
produced:
-------------------------------
Model L1500-9x not found in the models
database.
-------------------------------
and
-------------------------------
Previous messages indicate that one or more
errors occurred in an attempt to retrieve
mo_sv_proc_sg information.
-------------------------------
JAGad36145) The online addition and replacement dialog
box that says:
-------------------------------
The slot is powered down, Click "OK" when
the card is replaced and the slot will be
powered up.
-------------------------------
is confusing and leads to operator errors.
JAGad35304) The sequence of events required to replace a
suspended I/O card is confusing.
JAGad32172) Both physical and virtual ports show up in
the Cards screen, but only physical ports
are reported as being 'affected' by an
OLAR operation in the Critical Resource
Analysis screen or "Bring Card On-Line
confirmation" screen. This could cause
user confusion.
JAGad50027) When a user that is not root and does not
have Restricted SAM privileges tries to
enter SAM, a confusing message is presented:
-----------------------------------
The file "/var/sam/lock/lock_0" could not
be opened (errno = 13, "Permission denied").
This file must be opened so this SAM session
can be locked. Otherwise, other SAM sessions
won't be able to detect that this SAM session
is running on the system.
-----------------------------------
JAGad28114) Both the PCI Standard Hotplug Controller
(SHPC) spec and the Infiniband spec are
proposing the use of a Blinking amber LED
to locate a PCI slot for a hotplug operation.
SAM currently turns on a solid amber LED for
this purpose, which is an error indicator
in the new standard.
JAGad34991) SAM has obsoleted a number of files between
10.20 and 11.11. After an update from an
older release to 11.11, some of the obsolete
files are left on the file system.
Defect Description:
PHCO_35520:
JAGag05164) SAM fails to copy any directories in
/etc/skel because the program it uses
can only copy files.
Resolution: SAM code is modified to copy both
files and directories from /etc/skel.
JAGaf92083) SAM needs to support the new
PCI mux card which uses pci_mux1 driver.
Resolution: Now, SAM supports the new mux card
using the driver pci_mux1.
JAGag23921) The response time of SAM's Disk
Devices sub-area under Disks and File
Systems is too long when connected to a
large Disk array configured with multiple
paths.
Resolution: The response time of SAM's Disk Devices
sub area is improved by approximately
40 percent using a better algorithm
to detect multiple paths.
JAGaf93277) Network services in SAM shows ftp
disabled if ftp is enabled when
ftp-data port is not specified in
the /etc/services file.
Resolution: SAM code is modified to handle this
scenario (ftp-data port is disabled)
to describe the status.
JAGag05301) When a default route(gateway) entry
has double quotes, SAM adds a new entry
instead of modifying the existing one.
Resolution: SAM code is modified to update the
existing entry instead of adding a new
entry.
JAGag19227) SAM configures read-mostly file systems
incorrectly. When there is an entry in
both read-write list and read-only list
of export file systems, SAM removes
the entry from read-only list.
Resolution: SAM code is modified to keep the existing
entries in both the lists.
JAGag28304) SAM is unable to parse the automounter
files properly when a single line of
information is typed in two lines with "\"
followed by whitespace at the end of
first line.
Resolution: SAM code is modified to handle the scenario
if whitespace characters are present between
"\" and new line character.
PHCO_34207:
JAGaf80147) SAM added the password_compat: syntax to the
tail of the /etc/nsswitch.conf file, which is
incomplete. The syntax is a NIS+ syntax and the
syntax should be as specified in the
nsswitch.conf(4).
Resolution: SAM code has been modified to update the
correct NIS+ syntax in the /etc/nsswitch.conf
file.
JAGaf80148) SAM fails to update the /etc/hosts file if the
nodename and hostname is different because SAM
does not support nodename that is more than
nine characters.
Resolution: SAM code has been modified such that the
/etc/hosts file is modified by SAM even if the
nodename and hostname are different.
JAGaf89648) SAM needs to support EVA GL active/active arrays
that identify themselves as HSV101 or HSV111.
Resolution: Now, SAM supports the EVA GL active/active
arrays that identify themselves as HSV101 or
HSV111.
JAGaf90614) SAM does not warn users about temporary
passwords in trusted system due to insufficient
SAM documentation and warnings.
Resolution: SAM code has been modified to display warning
messages to users about temporary passwords.
SAM online help system has also been updated.
PHCO_32397:
JAGaf44075) SAM has no support for MSA1000 disk array and
consequently the disk array LUNs with
multipaths are incorrectly displayed.
Resolution: SAM is modified to support MSA1000
JAGae58009) On a HP-UX 11i v1 superdome system with EMC
8530 disk array attached, and HP StorageWorks
DS2300 (A6490AZ) installed, a temporary device
file transformer_dev is not removed by SAM in
the /var/sam directory.
Resolution: SAM cleans up the temporary device files
on exiting the SAM -> Disks and File Systems
subarea when the HP-UX system is attached to
the transformer device.
JAGaf43299) SAM tries to unload the kernel modules without
properly checking for their current module
status.
Resolution: SAM has been changed to unload the kernel
module, only if it is loaded.
JAGaf46301) On invoking the "sam -f user_name" command,
where the user "user_name" belongs to a
secondary group that has restricted SAM
privileges, the following error message is
displayed:
===============================================
Could not read the contents of the control file
"/etc/sam/custom/<username>.cf".
===============================================
Resolution: SAM man pages have been modified to correctly
advise how to grant restricted SAM privileges.
JAGaf55409) The Disk Devices screen of SAM incorrectly
collapses LUNs of XP12000 array.
Resolution: SAM has been changed to correctly detect
all paths for XP12000 LUNs.
JAGaf56757) The Disk Devices screen of SAM incorrectly
collapses LUNs of EVA XL arrays like EVA 4000/
6000.
Resolution: SAM has been changed to correctly detect
all paths for EVA XL arrays.
JAGaf62293) On a trusted system, SAM dumps core in the
SAM -> Auditing and Security -> Audited
Events screen. Change the open event to
"Audit for Success Only" and change all other
event types to "Audit Neither Success nor
Failure". Go to the "List" menu item change to
"Audited System Calls change execv and execve
to "Audit Both Success and Failure". Go to the
"List" menu item and change to "Audited
Events". The following error message is
displayed:
==============================================
UNEXPECTED EXIT: process LANG=C LC_ALL=C
/usr/sam/lbin/samx -C -p 9538 -s ts_events
/usr/sam/lib//ts.ui exited with a non-zero exit
status.
sh: 9643 Bus error(coredump)
===============================================
Resolution: On a trusted system, SAM works properly in the
SAM -> Auditing and Security -> Audited Events
screen.
JAGaf65943) In the Name Service Switch subarea, on
selecting a service and entering the "Configure
Name Service Switch..." screen, the search order
selections displayed do not reflect the current
settings stored for that service in the
/etc/nsswitch.conf file.
Resolution: SAM has been modified to display the search
order selections properly in the "Configure
Name Service Switch..." screen for any service.
JAGaf74405) SAM displays an error message in the Printers
and Plotters subarea and does not display
printers if a printer is disabled with a -r
option.
Resolution: SAM displays all the printers even if a printer
is disabled with a -r option.
JAGaf75337) SAM incorrectly reports the LTO 448 tape drive
because the description string that SAM
displays for LTO 448 tape drive is not unique.
Resolution: SAM displays the LTO 448 tape drive correctly.
JAGaf75354) In the ObAM description file
/usr/sam/lib/C/ts.ui, there is a nested
comment, which may result in an abnormal
termination of the trusted system subarea.
Resolution: The nested comment has been fixed in the
ObAM description file /usr/sam/lib/C/ts.ui.
PHCO_31314:
JAGaf49179) Since the VxVM disks are initialized with
enclosure-based names, they are of the format
Disk_0 instead of cxtxdx. SAM tries to
validate a device file with the name Disk_0
and is not able to trace the device file.
Resolution: The enclosure-based names are mapped to a
device file name before running the check
for validating a device file. Now, the Disk
Devices subarea displays the correct message
with VxVM enclosure-based names.
JAGae98694) SAM uses a script to get volume group
information on the system. There is a problem
in the way the script collects volume group
information.
Resolution: The script now uses the correct commands to
get volume group information.
JAGaf10354) SAM does not check the primary group of
superuser "root" during initialization and as a
result, files and directories get created with
the effective non-standard group when
converting a system to trusted mode.
Resolution: SAM has been modified to provide an option to
the user, before the functional area launcher
is displayed, to either change the group to
"sys" which is the standard primary group for
root or proceed with the current non-standard
group for root.
JAGaf25212) When a default route is added or modified using
SAM, the route details are added in the
/etc/rc.config.d/netconf file to save the
configuration across reboot. The entries in the
/etc/rc.config.d/netconf file are wrongly
updated by SAM if the newly added entry has the
GATEWAY value, which is same as that of the
existing entries in
the /etc/rc.config.d/netconf file.
Resolution: Now, the original configuration in the
/etc/rc.config.d/netconf file is not lost when
a default route is added or modified from the
Route functional area of SAM.
JAGaf35416) SAM internally creates the user sam_exec on
the remote system for launching SAM. The user
"sam_exec" is created with the group "other". On
the remote system, SAM is launched by user
sam_exec and as a result files and directories
get created with the group "other".
Resolution: SAM has been modified to create the user
sam_exec on the remote system with the group
"sys".
JAGaf42618) It has been incorrectly documented in the SAM
online help that the password life time must
be greater than the password expiration time.
Resolution: The online help of password lifetime parameter
has been updated that password life time must
be greater than or equal to the password
expiration time.
JAGaf47496) One of the SD control scripts in SAM
calls /usr/sam/bin/samreg. This
command would go through the list of
current running processes using ps(1)
and kill any process whose names
contains "samd".
Resolution: The /usr/sam/bin/samreg has been modified
to kill only the "/usr/sam/lbin/samd"
process at the time of installation of the SAM
patch. However, after the SAM patch is removed,
all processes whose names contain character
sequence "samd" would be removed.
JAGaf52760) This happens if a volume group was created
from the command-line and extended from within
SAM. This happens because the command options
used to create a volume group from the
command-line are different from those SAM uses.
SAM emits error when it checks to ensure max
size is not exceeded.
Resolution: SAM now fixes this by eliminating the need to
check the maximum size of the volume group
being extended.
JAGaf55711) On modifying a deactivated user's password
options in shadow mode, SAM displays the
following error message:
===============================================
"Failed to modify user "<USER>". An invalid
command syntax was used to invoke the command
"/usr/sam/lbin/usermod.sam"
===============================================
Resolution: Now, SAM modifies deactivated user's password
options successfully in shadow mode system.
JAGaf55984) SAM needs to be enhanced to support
configuration of driver parameters and IP
parameters for 10GBASE-SR Cards.
Resolution: Now, SAM support configuration of driver
parameters and IP parameters for 10GBASE-SR
cards.
PHCO_31312:
JAGae84402) On entering SAM-> Accounts for Users and Groups
-> Users subarea, SAM does not detect the
existence of the file /etc/shadow. It is not
able to utilize the password aging and account
lifetime information present in /etc/shadow
to display and manage the password aging
parameters of a user.
Resolution: SAM has been enhanced to support and manage
password aging and account lifetime features
present in the file, /etc/shadow. The user
templates feature in SAM-> Accounts for Users
and Groups-> Users subarea has not been
enhanced to support password aging and account
lifetime features in shadow mode.
JAGaf32077) SAM online help has to be updated to document
password aging and account lifetime features
in SAM -> Account for Users and Groups -> Users
subarea when the system is in shadow mode.
Resolution: SAM online help has been updated to document
about password aging and account lifetime
features in SAM -> Account for Users and
Groups -> Users subarea when the system is in
shadow mode.
PHCO_30598:
JAGaf32099) For an EVA disk array, SAM->Disks and
FileSystems->Disk Devices functional area
displays the alternate path to a disk as a
separate LUN if the device identifier bytes
returned by ioscan(1M) do not match.
Resolution: For an EVA disk array, the alternate paths
to a disk are correctly recognised even if the
device identifier bytes do not match.
PHCO_29327:
JAGad98578) SAM is not updating the value for number of
configured aliases correctly. As a result,
a junk value is displayed. Since the value
for the number of configured aliases is not
correct, SAM fails to display the configured
aliases.
Resolution: SAM correctly updates the value for number of
configured aliases.
JAGae16057) While adding or removing a Dynamic Loadable
Kernel Module (DLKM) to/from the kernel, the
user can specify whether the DLKM can be added
to the file /etc/loadmods as well. For the SNA
modules, the user does not specify that DLKM
must be added to the file /etc/loadmods but
SAM adds the DLKM to the file /etc/loadmods
before regenerating the kernel.
Resolution: SAM has been modified to have the DLKMs added
to or removed from the /etc/loadmods only if it
is specified by the user in SAM's Kernel
Configuration area. If the specification is not
provided while adding a DLKM, then the update
of /etc/loadmods is bypassed.
JAGae26852) SAM does not check for a duplicate IPv4/IPv6
address before configuring the IP address. As
a result, incorrect updates are made to the
files /etc/hosts and /etc/rc.config.d/netconf
or /etc/rc.config.d/netconf-ipv6.
Resolution: SAM now checks for a duplicate IPv4/IPv6
address before configuring the IP address. SAM
updates the files /etc/hosts,
/etc/rc.config.d/netconf or
/etc/rc.config.d/netconf-ipv6 only if the
validation for duplicate IP address is
successful.
JAGae44626) On an NIS+ enabled system, SAM tries to access
the NIS+ tables for carrying out NIS+ related
initialization on entering any of the subareas
under "Accounts for Users and Groups"
functional area. When the NIS+ master server is
not reachable, the initialization process
results in errors as the NIS+ tables cannot be
accessed.
Resolution: On entering any of the subareas under "Accounts
for Users and Groups" functional area of SAM
(Local Users/Local Groups/NIS+ Users/NIS+ groups)
on an NIS+ enabled system, if the NIS+ master
server is not reachable, the following message
is displayed:
----------------------------------------------
This system is defined to be an NIS+ client
("NISPLUS_CLIENT=1" was found in
/etc/rc.config.d/namesvrs), but the NIS+ master
server is not reachable.
Should SAM continue treating this system as if
it were NOT an NIS+ client?
[ Yes ] [No]
----------------------------------------------
To proceed with administering the local users/
groups as in a BASIC system (Non NIS+), click
Yes. To go back to the "Accounts for Users and
Groups" screen, click No.
JAGae48820) SAM checks autonegotiation and MTU values. In
case of mismatch, SAM displays the error
message. As SAM is storing incorrect values
for the card type (gelan) and autonegotiation,
SAM does not display the error message.
Resolution: SAM has been modified to store the correct card
type and autonegotiation value for gelan cards.
JAGae52086) SAM stops processing NIS/NIS+ entries once it
encounters an invalid entry.
Resolution: SAM code has been modified to skip the invalid
entry and continue processing the rest of the
password table/map.
JAGae52920) SAM fails with bus error when modifying
DNS settings.
Resolution: SAM code has been modified to set up DNS
properly.
JAGae54576) While adding a new NIS+ user, SAM adds the NIS+
user successfully to the password table, but
fails to update the credentials. This scenario
occurs if the credentials already exist for
another user with same UID in the parent domain.
SAM should first check if the credential exist
in the current domain for the UID before
modifying the password table.
Resolution: SAM checks if the credential exist in the
current domain for the UID before modifying the
password table. If the credentials already exist
for the specified UID, SAM will display a
message asking the system administrator to
enter another id or uncheck the "Create User
Credentials" table.
JAGae54919) In the SAM Kernel Configuration subarea,
provide a valid template file, choose "Apply
Template" and select the "Refresh" menu item
from the "Options" menu. SAM displays an error
message and the SAM GUI displays zeroes for
current and pending values of all kernel
parameters.
Resolution: SAM code has been modified to load the template
file correctly after selecting a valid template
file in the Kernel Configuration area. Now, the
"Refresh" menu item under the "Options" menu
works correctly as expected.
SAM retrieves default (not current) values and
assigns the default values to the kernel
parameters that are not specified in the
applied template. SAM may fail to generate
a new kernel if the applied template is for
all dynamic kernel parameters.
JAGae56856) When the logical volume is defined from the
same user interface from where the volume group
is being created ("Create New Volume
Group" window followed by the "Define New
Logical Volumes" window), the "Approx. Free
Mbytes" field displays a value more than the
actual space available on the selected disks.
Resolution: When an attempt is made to create logical
volume on the volume group that is yet to be
created, a note will be displayed in the
"Define New Logical Volumes" window that one
or more logical volumes' creation may fail if
all the space displayed in the "Approx. Free
Mbytes" field is utilized.
This note will be displayed from the following
entry points to the "Create New Logical
Volumes" screen -
1. Disk and File Systems -> Disk Devices ->
Actions -> Configure -> Using the Logical
Volume Manager -> A New Volume Group ->
Define New Logical Volumes
2. Disk and File Systems -> Disk Devices ->
Actions -> Configure -> Using the Logical
Volume Manager -> An existing Volume Group
-> Define New Logical Volumes
3. Disk and File Systems -> Volume Groups ->
Actions-> Create. Enter a new volume group
and select Define New Logical Volumes.
JAGae60721) SAM calls the driver init script even
when the driver parameters are not modified.
Resolution: Now, SAM calls the driver init script only when
the driver parameters are modified.
JAGae61148) The online help and manpage (samlog_view.1) for
samlog viewer displays the year of date in
2-digit format and must be modified to display
valid 2-digit and 4-digit formats.
Resolution: The samlog viewer manpage (samlog_view.1) and
online help has been modified to display the
correct date format.
JAGae61160) samlog_viewer(1M) is not Y2K compliant. When
samlog_viewer(1M) is invoked with year greater
than 2037, SAM considers the year as 1970.
Resolution: SAM code has been modified to support both
2-digit and 4-digit year formats. For 2-digit
year input, the valid range is 70-99 (1900+)
and 00-37 (2000+), and for the 4-digit year
input, the valid range is defined as 1970-2037.
JAGae61583) SAM online help displays wrong description of
values (minimum, maximum and default). The
values in SAM online help, and
/usr/conf/master.d/core-hpux file mismatch.
Resolution: SAM online help has been modified with correct
minimum, maximum and default values of
"maxdsiz" and "maxdsiz_64".
JAGae67830) A temporary log file with name '0' (zero)
is created in the root directory while
upgrading from HP-UX 11.00 release to
HP-UX 11.11 release.
Resolution: The post install script has been modified so
that a temporary log file with name '0' (zero)
is no longer created in the root directory.
JAGae70332) The ifconfig(1M) command is called even if none
of the IP parameters are modified.
Resolution: SAM has been modified to execute the
ifconfig(1M) command only when the IP
parameters are modified.
JAGae72428) VLAN cannot be viewed or created via SAM
because insufficient memory is allocated.
Resolution: SAM has been modified to allocate sufficient
memory to hold the interface name.
JAGae74095) While analyzing critical resources for a card
replacement, SAM creates the list of affected
resources. While creating the list of affected
file systems, SAM obtains the list of all
file systems on the system by merging the
information obtained from bdf(1M), entries
in /etc/fstab and entries in /etc/mnttab.
When a file system is removed internally by
SAM, the entry from /etc/mnttab is removed by
umount(1M)(internally called by SAM) and the
entry from the /etc/fstab is removed by SAM as
part of the file system removal procedure.
However, when an explicit umount(1M) is
executed on the file system in question from
the command line, only the /etc/mnttab entry
is removed whereas the /etc/fstab entry remains.
Resolution: SAM has been modified so that the entries in
the file /etc/fstab are not added to the
list of affected devices if the file system
is not mounted.
JAGae74460) The Backup and Recovery service of SAM calls the
binary /usr/sam/lbin/autoopt to read information
about automounted file systems. Since the
binary /usr/sam/lbin/autoopt dumps core, the
"Interactive backup" functionality displays an
error message.
Resolution: /usr/sam/lbin/autoopt has been modified to
resolve the core dump problem.
JAGae75264) SAM does not check if the logical volume
extended is a boot logical volume. On extending
the boot logical volume from "SAM -> Disks and
Filesystems -> Volume Groups" subarea, the boot
information is lost. This means that the system
will never boot at next reboot.
Resolution: SAM has been modified to extend the boot
logical volumes correctly.
JAGae76847) SAM is not able to perform the power off
operation on the OLAR-able slot for multi-port
cards.
|
