 |
≫ |
|
|
|
パッチ名: PHCO_36670
パッチ摘要: s700_800 11.23 累積machinfoコマンドパッチ
作成日: 07/06/07
公開日: 07/07/24
ハードウェアプラットフォームおよびOSリリース:
s700: 11.23
s800: 11.23
現象:
PHCO_36670:
(SR:8606477311 CR:JAGag31729)
machinfoコマンドがIntel(r) Itanium(r) 2 9100シリーズプロセッサを正しく
識別しません。
問題点の説明:
PHCO_36670:
(SR:8606477311 CR:JAGag31729)
Intel(R) Itanium(R) 2 9100シリーズプロセッサを正しく識別するように
machinfoコマンドを修正する必要があります。
解決方法:
Intel(R) Itanium(R) 2 9100シリーズプロセッサを正しく識別するように
machinfoコマンドを修正しました。
-----------------------------------------------------------------------------
Patch Name: PHCO_36670
Patch Description: s700_800 11.23 Cumulative machinfo command patch
Creation Date: 07/06/07
Post Date: 07/07/24
Hardware Platforms - OS Releases:
s700: 11.23
s800: 11.23
Products: N/A
Filesets:
OS-Core.CORE-ENG-A-MAN,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,v=HP
OS-Core.USRCONTRB,fr=B.11.23,fa=HP-UX_B.11.23_IA,v=HP
Automatic Reboot?: No
Status: General Release
Critical: No
Category Tags:
defect_repair hardware_enablement enhancement
general_release
Path Name: /hp-ux_patches/s700_800/11.X/PHCO_36670
Symptoms:
PHCO_36670:
( SR:8606477311 CR:JAGag31729 )
Intel(r) Itanium(r) 2 9100 series processors are not
correctly identified as such by the machinfo command.
PHCO_34710:
( SR:8606439139 CR:JAGaf97144 )
The machinfo command does not display stepping information
for Intel(R) Itanium 2 9000 series processors.
PHCO_33751:
( SR:8606411285 CR:JAGaf71167 )
Machinfo command (Intel Itanium-based systems only) reports
the wrong processor speed on systems with Itanium 2
Processors (1.4-1.8 GHz, up to 24MB cache).
The processor speed is reported as being 350-400 MHz.
PHCO_32642:
( SR:8606386728 CR:JAGaf46882 )
Certain newly defined processor capability bits are not
decoded without this patch.
PHCO_31591:
( SR:8606351664 CR:JAGaf12469 )
Man pages that are architecture specific do not indicate
that fact.
( SR:8606353270 CR:JAGaf14065 )
This product update provides pre-enablement for future
expansion of the maximum length of the system nodename and
hostname. Any actual expansion capability may be provided in
a future HP-UX nodename and hostname expansion product. Upon
installation, the nodename and hostname expansion bundle
(NodeHostNameXpnd) will install the full set of product
updates (including this one) needed to enable the expansion.
If the nodename and hostname expansion bundle is not
installed, this product update will have no affect on your
system.
( SR:8606368218 CR:JAGaf28781 )
The 'machinfo' command doesn't recognize
some of the Intel Itanium processor family and
model numbers. It displays "Processor name is
not available" in the "processor model" field for those
processors.
Defect Description:
PHCO_36670:
( SR:8606477311 CR:JAGag31729 )
The machinfo command needs to be updated with identification
information for Intel(R) Itanium(R) 2 9100 series
processors.
Resolution:
The machinfo command has been updated with identification
information for Intel(R) Itanium(R) 2 9100 series
processors.
PHCO_34710:
( SR:8606439139 CR:JAGaf97144 )
The machinfo command's stepping information needs to be
updated to identify Intel(R) Itanium 2 9000 series
processors.
Resolution:
The machinfo command has been updated to provide stepping
information for the Intel(R) Itanium 2 9000 series
processors.
PHCO_33751:
( SR:8606411285 CR:JAGaf71167 )
The machinfo command has used the interval timer frequency
as an indicator of processor speed. Intel Itanium 2
Processors (1.4-1.8 GHz, up to 24MB cache) run the interval
timer at a different frequency than the processor core.
Kernel patch PHKL_33752 is also required for the machinfo
command to display the correct processor speed on Itanium 2
Processors (1.4-1.8GHz, up to 24MB cache).
Resolution:
The machinfo command now uses processor core frequency
information provided by the kernel with patch PHKL_33752.
PHCO_32642:
( SR:8606386728 CR:JAGaf46882 )
Certain newly defined processor capabilities in CPUID
register 4 are not being decoded and displayed.
Resolution:
Add functionality to decode and display the newly defined
processor capability bits in CPUID register 4.
PHCO_31591:
( SR:8606351664 CR:JAGaf12469 )
Architecture specific man pages need to indicate that
fact at the start of the man page information.
Resolution:
Added architecture specific notification at the start of
the man page information.
( SR:8606353270 CR:JAGaf14065 )
This product update contains some minor enhancements
required to pre-enable a future HP-UX nodename and hostname
expansion product bundle(NodeHostNameXpnd).
Resolution:
Internal buffers for the nodename or hostname are expanded
in preparation for a future increase to the associated
maximum length constraint.
( SR:8606368218 CR:JAGaf28781 )
The 'machinfo' command did not have code to recognize
some of the Intel Itanium processor families and
their model numbers. As a result, the "processor
model" field of this command displayed "Processor name is
not available" whenever those processors were present on
the system.
Resolution:
The 'machinfo' command has been modified to recognize
the Intel Itanium processor families and their models
that are supported.
Enhancement:
No (superseded patches contained enhancements)
PHCO_31591:
( SR:8606353270 CR:JAGaf14065 )
Support added for future maximum length expansion of
hostname.
SR:
8606477311 8606439139 8606411285 8606351664 8606353270
8606368218 8606386728
Patch Files:
OS-Core.CORE-ENG-A-MAN,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,
v=HP:
/usr/share/man/man1.Z/machinfo.1
OS-Core.USRCONTRB,fr=B.11.23,fa=HP-UX_B.11.23_IA,v=HP:
/usr/contrib/bin/machinfo
what(1) Output:
OS-Core.CORE-ENG-A-MAN,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,
v=HP:
/usr/share/man/man1.Z/machinfo.1:
None
OS-Core.USRCONTRB,fr=B.11.23,fa=HP-UX_B.11.23_IA,v=HP:
/usr/contrib/bin/machinfo:
machinfo.c $Date: 2007/05/29 16:00:00 $Revision: r11
.23/6 PATCH_11.23 (PHCO_36670)
$Revision: @(#) machinfo R11.23_BL2007_0607_2 PATCH_
11.23 PHCO_36670
cksum(1) Output:
OS-Core.CORE-ENG-A-MAN,fr=B.11.23,fa=HP-UX_B.11.23_IA/PA,
v=HP:
3237170270 718 /usr/share/man/man1.Z/machinfo.1
OS-Core.USRCONTRB,fr=B.11.23,fa=HP-UX_B.11.23_IA,v=HP:
674888048 43996 /usr/contrib/bin/machinfo
Patch Conflicts: None
Patch Dependencies:
s700: 11.23: PHKL_31500
s800: 11.23: PHKL_31500
Hardware Dependencies: None
Other Dependencies: None
Supersedes:
PHCO_34710 PHCO_33751 PHCO_32642 PHCO_31591
Equivalent Patches:
PHCO_36489:
11.31
Patch Package Size: 50 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHCO_36670
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHCO_36670.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHCO_36670. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHCO_36670.text file is
available in the product readme:
swlist -l product -a readme -d @ /tmp/PHCO_36670.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHCO_36670.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions: None
|
