 |
≫ |
|
|
|
パッチ名: PHSS_35966
パッチ摘要: s700_800 11.23 Xサーバー累積パッチ
作成日: 07/03/19
公開日: 07/04/24
ハードウェアプラットフォームおよびOSリリース:
s700: 11.23
s800: 11.23
現象:
PHSS_35966:
1.(SR:8606473992 CR:JAGag28594)
システムのシャットダウン中に、たまに、次のようなエラーメッセージが表示
されることがあります。
Unload/Uninstall XF86 DLKM Helper Modules....FAIL*
このエラーメッセージが表示されるかされないかは、各種のshutdownスクリプ
ト間のタイミングによります。
2.(SR:8606475128 CR:JAGag29569)
Radeon 7500の4画面マルチスクリーン構成での不正なモニター解像度。
3.(SR:8606475807 CR:JAGag30124)
XF86Configファイル内で、不正な(ワークステーション)バージョンの
Graphics Administration Guide(GAG)が参照されています。
4.(SR:8606475834 CR:JAGag30147)
snfフォントを使用すると、XF86 Xサーバーがクラッシュします。
問題点の説明:
PHSS_35966:
1.(SR:8606473992 CR:JAGag28594)
システムのシャットダウン中に、たまに、グラフィックスカーネルモジュール
をアンインストールできないことがありました。そのため、次のようなメッセ
ージが表示されてることがありました。
Unload/Uninstall XF86 DLKM Helper Modules....FAIL*
このエラーメッセージが表示されるかされないかは、各種のshutdownスクリプ
ト間のタイミングによります。
このメッセージは無害なので、無視してもかまいません。
解決方法:
グラフィックスカーネルモジュールはまだ使用中かもしれないので、シャット
ダウン時にそれらのモジュールをアンロードしないように/sbin/init.d/xf86
スクリプトを修正しました。次回のブート時に、同じスクリプトがそれらのモ
ジュールを正しく構成します。
2.(SR:8606475128 CR:JAGag29569)
Radeonの4画面マルチスクリーンでのモニター解像度が不正でした。ヘッドご
とに異なる解像度で4画面マルチスクリーンを構成する必要があります。その
ためには、ヘッドが各カードに交互に対応するようにスクリーンを配置する必
要があります。
スクリーン0、gvid0、コネクタ1
スクリーン1、gvid1、コネクタ1
スクリーン2、gvid0、コネクタ2
スクリーン3、gvid1、コネクタ2
ところが、スクリーン0がスクリーン2の解像度に初期化されていました。
解決方法:
ドライバのコードを修正しました。
3.(SR:8606475807 CR:JAGag30124)
XF86Configファイル内で、サーバーのGAGではなく、不正な(ワークステーショ
ン)バージョンのGAGが参照されていました。
解決方法:
新たなドキュメントを参照するようにXF86Configファイル内のコメントを修正
しました。
4.(SR:8606475834 CR:JAGag30147)
snfフォントを使用すると、XF86がクラッシュしていました。
解決方法:
snfフォントを使用しようとしたら、エラーメッセージを表示するようにXF86
を修正しました。これで、XF86はクラッシュしません。
-----------------------------------------------------------------------------
Patch Name: PHSS_35966
Patch Description: s700_800 11.23 Xserver cumulative patch
Creation Date: 07/03/19
Post Date: 07/04/24
Hardware Platforms - OS Releases:
s700: 11.23
s800: 11.23
Products: N/A
Filesets:
Xserver.OEM-SERVER,fr=B.11.23,fa=HP-UX_B.11.23_IA,v=HP
Xserver.OEM-SERVER-PA,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.AGRM,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.DDX-ADVANCED,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.DDX-ENTRY,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.DDX-LOAD,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.DDX-SAM,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.DDX-SLS,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.DDX-UTILS,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.X11-SERV,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.X11-SERV-MAN,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.XEXT-DBE,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.XEXT-DBE-MAN,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.XEXT-DPMS,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.XEXT-DPMS-MAN,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.XEXT-HPCR,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.XEXT-HPCR-MAN,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.XEXT-MBX,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Xserver.XEXT-RECORD,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP
Automatic Reboot?: Yes
Status: General Release
Critical:
Yes
PHSS_35966: ABORT
ABORT - SR: 8606475834 CR: JAGag30147
PHSS_32960: ABORT
ABORT - SR: 8606430092 CR: JAGaf89551
PHSS_31252: ABORT
ABORT - SR : 8606371853 CR : JAGaf32271
ABORT - SR : 8606351635 CR : JAGaf12440
PHSS_30502: ABORT HANG
ABORT - SR : 8606348182 CR : JAGaf09004
HANG - SR : 8606350848 CR : JAGaf11660
HANG - SR : 8606341717 CR : JAGaf02624
PHSS_30171: OTHER
OTHER - OpenGL applications unable to run
PHSS_29710: PANIC HANG
PANIC - SR: 8606334950 CR: JAGae96027
HANG - SR: 8606324111 CR: JAGae86576
Category Tags:
defect_repair enhancement general_release critical panic
halts_system
Path Name: /hp-ux_patches/s700_800/11.X/PHSS_35966
Symptoms:
PHSS_35966:
1. ( SR: 8606473992 CR: JAGag28594 )
When a system is being shut down, occasionally
a user will see an error message such as the
following:
Unload/Uninstall XF86 DLKM Helper Modules....FAIL*
The error may or may not show up depending on
the exact timing between various shutdown scripts.
2. ( SR: 8606475128 CR: JAGag29569 )
Some Radeon 7500 quad multiscreen configurations
get monitor resolutions wrong.
3. ( SR: 8606475807 CR: JAGag30124 )
The XF86Config file references the wrong (workstation)
version of the Graphics Administration Guide (GAG).
4. ( SR: 8606475834 CR: JAGag30147 )
When using snf fonts with XF86 the Xserver crashes.
PHSS_35253:
1. ( SR: 8606455038 CR: JAGag11641 )
On ATI Radeon 7500 cards, the SAM (/usr/sbin/sam)
monitor configuration screen shows two monitors, even if
only one is configured for use by the Xserver.
2. ( SR: 8606440362 CR: JAGaf98245 )
The setmon utility (/opt/graphics/common/bin/setmon)
(also used by SAM) is unable to change monitor
resolution and timing on both screens of an ATI Radeon
7500.
3. ( SR: 8606454487 CR: JAGag11129 )
The utility that loads the X display server
(/usr/bin/X11/X) is a PA-RISC executable on Itanium
systems. There is no incorrect behavior.
4. ( SR: 8606454477 CR: JAGag11121 )
In SAM (/usr/sbin/sam), ATI Radeon 7000 graphics devices
shows two available displays.
5. ( SR: 8606452818 CR: JAGag09617 )
In SAM, 'Accelerate Indirect Rendering' is incorrectly
shown as a valid Screen Option on Radeon graphics cards.
6. ( SR: 8606452816 CR: JAGag09615 )
On ATI Radeon graphics devices, SAM allows Screen
Options to be set, but does not allow them to be unset.
7. ( SR: 8606430400 CR: JAGaf89859 )
SAM cannot modify the Default Visual on ATI Radeon
graphics devices.
8. ( SR: 8606430276 CR: JAGaf89735 )
SAM (/usr/sbin/sam) does not correctly configure Single
Logical Screen (SLS) on ATI Radeon graphics cards.
9. ( SR: 8606430274 CR: JAGaf89733 )
The SAM utility (/usr/sbin/sam) cannot create
multi-screen configurations for ATI Radeon graphics
cards.
PHSS_32960:
( SR: 8606431855 CR: JAGaf91297 )
Running applications that use the MIT-SHM extension
remotely can generate an XError, such as BadIDChoice or
BadAccess.
( SR: 8606431660 CR: JAGaf91102 )
Calls to XCreatePixmap() with large coordinates may be
incorrectly denied.
( SR: 8606430933 CR: JAGaf90376 )
Monitor resolution 1920x1200@60Hz gets div-by-zero
exception on ATI Radeon 7500.
( SR: 8606430463 CR: JAGaf89922 )
Monitor does not sync with some resolutions on Radeon
7500 with DVI. Other resolutions will have incorrect
timing.
( SR: 8606430092 CR: JAGaf89551 )
The 'setmon' program can abort when selecting the same
resolution as the resolution that is already already
set.
( SR: 8606390246 CR: JAGaf50392 )
SAM does not restart the X server when the resolution is
changed and the CDE login screen is displayed.
( SR: 8606390245 CR: JAGaf50391 )
The SAM "Display Monitor Timing" screen should not have
a field "Monitor Supports" for ATI FireGL or ATI Radeon
devices.
( SR: 8606378653 CR: JAGaf38911 )
Enhance setmon to be able to identify the type of
monitor (vendor, model) attached to a graphics card.
( SR: 8606378480 CR: JAGaf38738 )
Turning DPMS on for a system in Xinerama mode only
causes the first monitor to go into power saving mode.
The other monitors will stay active.
( SR: 8606372295 CR: JAGaf32702 )
XDrawArc() doesn't draw an arc when using large width
and height parameters on ATI Radeon devices.
PHSS_32953:
( SR: 8606419692 CR: JAGaf79522 )
XCreatePixmap() functions incorrectly.
( SR: 8606413877 CR: JAGaf73736 )
The X server may fail to start on ATI FireGL4, and ATI
FireGL X1/Z1 because of the existence of one or more
/tmp/.X*-lock file(s).
PHSS_31252:
( SR: 8606379334 CR: JAGaf39583 )
This update provides enablement for expansion of the
maximum length of the system nodename and hostname. Any
actual expansion capability will be provided in a
separate HP-UX nodename and hostname expansion product.
( SR: 8606371890 CR: JAGaf32309 )
Backing store (when enabled) may not work properly on
ATI Radeon 7000, ATI FireGL4, and ATI FireGL X1/Z1. For
example, when a window using backing store is enlarged,
the contents from the newly exposed area may not appear
on the screen.
( SR: 8606351635 CR: JAGaf12440 )
The graphdiag utility can fail with a segmentation fault
when run on an ATI Radeon 7000 (IPF systems) or an HP
FX2, FX4 or FX6 (PA-RISC systems).
( SR: 8606391742 CR: JAGaf51874 )
ATI FireGL X1/Z1 graphics devices can have video noise
on digital output on some L2335 flat panel monitors at
1920x1200 resolution.
( SR: 8606391679 CR: JAGaf51811 )
The Xserver needs to use an alternate set of device
files for the USB keyboard and mouse.
( SR: 8606390696 CR: JAGaf50842 )
ATI FireGL X1/Z1 graphics devices configured for Single
Logical Screen (SLS) mode may have an incorrect
Dots-Per-Inch (DPI) reported.
( SR: 8606389388 CR: JAGaf49536 )
ATI FireGL X1/Z1 graphics devices configured for Single
Logical Screen (SLS) mode may have an incorrect size or
aspect ratio on some monitors.
( SR: 8606378137 CR: JAGaf38395 )
glXDestroyGLXPixmap() does not always free all Xserver
memory.
( SR: 8606371981 CR: JAGaf32399 )
XCopyArea() may produce incorrect results on an ATI
Radeon 7000 graphics device in a Xinerama configuration
when performed on windows that span physical screen
boundaries.
( SR: 8606371853 CR: JAGaf32271 )
Some applications running with an ATI Radeon 7000
graphics device in a Xinerama configuration may abort
with a core dump or BadWindow error when using dtwm or
mwm as the window manager.
( SR: 8606371168 CR: JAGaf31586 )
The _HP_SLS_CONFIGURATION_INFO property on the ATI
FireGL X1/Z1 devices is not consistent with other
graphics cards when configured in an SLS mode.
( SR: 8606368639 CR: JAGaf29201 )
Setmon displays the timing entries for the ATI FireGL4
hardware SLS modes when it shouldn't.
( SR: 8606397605 CR: JAGaf57587 )
This update provides enablement for the ATI Radeon 7500
graphics card.
PHSS_30872:
( SR: 8606394923 CR: JAGaf54937 )
Changes required by kernel modifications in graphics
hardware mapping.
PHSS_30505:
( SR: 8606368805 CR: JAGaf29367 )
On ATI FireGL4 and ATI FireGL X1/Z1 graphics cards,
setmon cannot query the monitor for timing information
while CDE is at the login screen.
( SR: 8606349293 CR: JAGaf10114 )
When running on ATI FireGL4, ATI FireGL X1/Z1 graphics
cards, the Xserver may return an error message after
approximately 107 clients have connected - indicating
that it has accepted the maximum number of clients.
( SR: 8606364816 CR: JAGaf25455 )
FireGL X1/Z1 Xserver crosshair cursor occasionally will
leave droppings
( SR: 8606362676 CR: JAGaf23342 )
Stereo windows sometimes appear non-stereo on ATI FireGL
X1/Z1
PHSS_30502:
( SR: 8606347981 CR: JAGaf08803 )
If USB input devices (keyboard/mouse) are physically
disconnected from the host system, the Xserver needs to
be restarted in order to use these devices again, even
after they are reconnected to the system.
( SR: 8606356367 CR: JAGaf17075 )
Xlib rendering in non-stereo visual windows on a FireGL
X1/Z1 graphics card running in a stereo mode X server
can fail to be visible in the right eye.
( SR: 8606350973 CR: JAGaf11785 )
1280x1024 @ 75 Hz timing does not work on HP2035 monitor
with ATI Fire GL4.
( SR: 8606351810 CR: JAGaf12615 )
The X Server should document how to enable backing store
functionality, as it is off by default on devices such
as ATI Fire GL4, ATI FireGL X1/Z1.
( SR: 8606350848 CR: JAGaf11660 )
When the X process is killed with kill -9 while client
3D applications are still running, the 3D process may be
left in an unkillable state. This applies to all FireGL
devices.
( SR: 8606350693 CR: JAGaf11505 )
The X Server does not always lock the graphics device
properly.
( SR: 8606348718 CR: JAGaf09539 )
Added support for the L2335 flat panel monitor.
( SR: 8606348342 CR: JAGaf09164 )
Drawing and erasing dashed lines with the xor function
leaves droppings.
( SR: 8606348182 CR: JAGaf09004 )
The X server core dumps when XCopyArea is given large
coordinate values.
( SR: 8606346787 CR: JAGaf07611 )
The ATI FireGL X1/Z1 driver does not properly observe
the gamma value set in the monitor section of the
XF86Config file. The gamma value entered there does not
have any effect on the gamma value used in the image
planes. Instead, it only affects the overlays.
( SR: 8606346647 CR: JAGaf07471 )
When the Xserver is in SLS mode on an ATI FireGL X1/Z1,
the Dots Per Inch (DPI) is listed incorrectly.
( SR: 8606346569 CR: JAGaf07393 )
The rendering of 2D lines by the X server is slow on ATI
FireGL X1/Z1 displays.
( SR: 8606345922 CR: JAGaf06768 )
Video sync is lost on FireGL X1 display after 2nd logout
in SLS mode.
( SR: 8606345593 CR: JAGaf06441 )
The ATI FireGL X1/Z1 driver does not provide a mechanism
to set the image and overlay gamma values independently
via the Monitor section of the XF86Config file. The
gamma setting present in the monitor section will apply
globally to both image and overlay windows.
( SR: 8606345585 CR: JAGaf06433 )
The current gamma value in use by the X server is not
reflected by the gamma tool when it first starts.
( SR: 8606345036 CR: JAGaf05886 )
SAM allows the user to attempt to setup up multi-screen
configurations on OEM graphics devices.
( SR: 8606344460 CR: JAGaf05310 )
When a user runs "xsetroot" on an ATI Fire GL4 graphics
device, the image is painted over the entire screen, and
visible windows remain covered by this image until their
next repaint. Other utilities that modify the
background of the root window may also exhibit this
behavior.
( SR: 8606341880 CR: JAGaf02787 )
Using 'xset' to add a font server to the font path fails
with the following error message:
xset: bad font path element (#36), possible causes are:
Directory does not exist or has wrong permissions
Directory missing fonts.dir
Incorrect font server address or syntax
When this occurs, the Xserver's error log contains the
following error messages:
_FontTransSocketOpen: socket() failed for tcp
_FontTransSocketOpenCOTSClient: Unable to open socket
for tcp
_FontTransOpen: transport open failed for
tcp/hostname:7000
( SR: 8606341717 CR: JAGaf02624 )
SAM locks up if you attempt to access the graphics
device while the CDE login screen (running SAM remotely)
is active.
( SR: 8606340535 CR: JAGaf01454 )
If you turn off the "channel lock" option of the gamma
tool, you cannot actually set independent red, green and
blue gamma values. It appears that only the blue slider
has any real affect on the gamma setting.
( SR: 8606340464 CR: JAGaf01383 )
When you change the DPMS blanking interval using SAM it
has no effect on CDE.
( SR: 8606340462 CR: JAGaf01381 )
When you turn DPMS ON in SAM if you hit Cancel instead
of OK, DPMS is still marked as on but the DPMS time
fields are not modifiable.
( SR: 8606340450 CR: JAGaf01369 )
When using the gamma tool, the correct gamma setting is
not always reflected by the X server when switching
between "Image" and "Image and Overlay" modes.
( SR: 8606339969 CR: JAGaf00890 )
X server prints error message at server shutdown and
server recycle that the "unlock" was called when the
device was not locked. The message reads:
"DRIUnlock called when not locked"
( SR: 8606330357 CR: JAGae91480 )
In the SAM "Monitor Configuration" screen with a Fire
GL4 both heads are labeled "ATI Fire GL4(0)". The 2nd
head isn't greyed out even if it's not enabled.
( SR: 8606330355 CR: JAGae91478 )
When using SAM to modify the monitor type the user has 2
options; do nothing and lose the changes or restart the
X server immediately.
( SR: 8606318220 CR: JAGae80746 )
SAM does not write out a change to the XF86Config file
if a user changes a screen option on a ATV Radeon 7000
card.
( SR: 8606308216 CR: JAGae71251 )
When SAM is being used to configure the default visuals
on a ATI Radeon 7000 the settings can get mixed up and
you can end up with depth/visual combinations that don't
make any sense.
( SR: 8606299003 CR: JAGae62499 )
The Xlib calls XGetImage and XCopyArea are slow on a ATI
FireGL X1/Z1 display.
( SR: 8606357394 CR: JAGaf18094 )
The FireGL X1/Z1 family of devices may encounter
incorrect 3-D data due to interaction between the X
server DDX driver and the 3-D driver.
( SR: 8606354473 CR: JAGaf15266 )
Running 3-D clients using different APIs (OpenGL and
PHIGS) can result in the screen gamma value changing
erratically. OpenGL uses a default value of 1.7. PHIGS
clients use a default of 1.0. Running clients using
different APIs back-to-back will result in the gamma
value changing back and forth between these values.
( SR: 8606353562 CR: JAGaf14356 )
The gamma tool (/opt/graphics/common/bin/gamma) can
generate an unparseable XF86Config file in locales where
the radix character is not a "." (period). The German
locale is one example where the radix character is a ","
(comma).
( SR: 8606340568 CR: JAGaf01486 )
Using the crosshair cursor with ICEM Surf can result in
red cursor droppings being left behind on the screen.
To reproduce, move the crosshair cursor
PHSS_30171:
( SR: 8606348725 CR: JAGaf09546 )
Problem in font libraries.
( SR: 8606346322 CR:JAGaf07149 )
OpenGL applications unable to run due to DLKM load
issue.
PHSS_29710:
( SR: 8606341863 CR:JAGaf02770 )
The Rev B of the Management Processor Card (A7231-66580)
does not work with the Radeon hardware init module.
Using the older module with the new card will result in
incorrect screen contents on the graphics console.
( SR: 8606329206 CR: JAGae90330 )
Problem with fonts.
( SR: 8606307093 CR: JAGae70128 )
SAM and graphinfo report different depths of overlay
planes on some graphics devices.
( SR: 8606320219 CR: JAGae82703 )
Under certain conditions, the gamma tool would
erroneously disallow updating of the XF86Config or
X0screens file
( SR: 8606308213 CR: JAGae71248 )
The Gamma Correction tool
(/opt/graphics/common/bin/gamma) does not work on the hp
ATI Fire GL4 graphics device.
(SR: 8606313395 CR: JAGae76193 )
The Gamma Correction tool
(/opt/graphics/common/bin/gamma) "Cancel" button does
not behave as expected.
( SR: 8606324111 CR: JAGae86576 )
Disabling the overlay planes on the FireGL4 while
leaving DRI enabled can cause the Xserver to hang when
moving a window.
( SR: 8606330522 CR: JAGae91645 )
Several pieces of documentation delivered with the
Xserver product reference the "Graphics Administration
Guide" (GAG) but do not indicate where to find it.
( SR: 8606334950 CR: JAGae96027 )
Systems with an ATI FireGL4 graphics card may
experience random kernel panics, where the panic stack
trace appears as follows:
panic+0x14
b_sema_sleep+0x1a4
__ke_down_struct_sem+0x50
firegl_find_file_for_pid+0x6c
_firegl_close+0xb4
firegl_dev_proc_exit+0xb0
gvid_process_exit_dev+0x144
gvid_process_exit+0x38
graphics_hook_call+0xa4
graphics_hooks_procexit+0x18
exit+0xfa8
psig+0x440
syscall+0x7e4
syscallinit+0x54c
( SR: 8606338932 CR: JAGae99878 )
When using 'sam' to unconfigure one graphics device and
configure a different graphics device, 'sam' can abort
with "Unresolved symbol: xf86NameCompare".
( SR: 8606338933 CR: JAGae99879 )
When using 'sam' to switch the Xserver from one graphics
device to another, 'sam' does not always switch the
devices properly, and the Xserver may remain configured
on the original device.
( SR: 8606308221 CR: JAGae71256 )
'sam' allows the user to create a vertical SLS
configuration on the ATI FireGL4 graphics device
although such a configuration is not possible.
( SR: 8606339081 CR: JAGaf00017 )
Xvfb rejects clients using a display specification of
localhost:<n>.0
Defect Description:
PHSS_35966:
1. ( SR: 8606473992 CR: JAGag28594 )
When a system is being shut down, occasionally
the graphics kernel modules will fail to uninstall.
This will result in the following message:
Unload/Uninstall XF86 DLKM Helper Modules....FAIL*
The error may or may not show up depending on
the exact timing between various shutdown scripts.
This message is harmless and can be ignored.
Resolution:
The /sbin/init.d/xf86 script has been changed to
not unload the graphics kernel modules during
shutdown since they may still be in use. The
same script will correctly configure these modules
at the next boot time.
2. ( SR: 8606475128 CR: JAGag29569 )
Radeon quad multiscreen gets monitor resolutions
wrong. Configure quad multiscreen with a different
resolution on each head.
Arrange the screens so that the heads alternate
from card to card:
Screen 0, gvid0, connector 1
Screen 1, gvid1, connector 1
Screen 2, gvid0, connector 2
Screen 3, gvid1, connector 2
Screen 0 will get initialized to the resolution
from Screen 2.
Resolution:
Driver code was changed to fix the problem.
3. ( SR: 8606475807 CR: JAGag30124 )
The XF86Config file references the wrong (workstation)
version of the Graphics Administration Guide (GAG).
It should reference the GAG for servers.
Resolution:
Comment in the XF86Config file was changed to refer
to a new document.
4. ( SR: 8606475834 CR: JAGag30147 )
snf fonts cause XF86 to crash.
Resolution:
Now on using snf fonts, XF86 will issue an
error message and do not crash.
PHSS_35253:
1. ( SR: 8606455038 CR: JAGag11641 )
An ATI Radeon 7500 Graphics card has two monitor
connections, allowing two physical screens to be
connected. SAM allows either screen to be configured
(resolution, refresh rate) even when only on screen is
configured to be used by the Xserver. This can lead to
the selection of an resolution or refresh rate that is
not supported by the monitor used for display.
Resolution:
If only one screen is configured for use by the Xserver,
SAM will only display that screen.
2. ( SR: 8606440362 CR: JAGaf98245 )
When the Radeon 7500 display is configured for dual
screens on one card, setmon can't change the resolution
of the second screen.
Resolution:
Fix setmon to handle multiscreen configurations.
3. ( SR: 8606454487 CR: JAGag11129 )
The X display server for Itanium systems is the
executable /usr/bin/X11/Xf86. This program is exec'd by
the PA-RISC X loader /usr/bin/X11/X. Because system
tools such as 'ps' or 'top' show the executable process
as 'X', it is easy to conclude that the X display server
is a PA-RISC executable when it is actually a native
Itanium executable.
Resolution:
Deliver a native Itanium X loader (/usr/bin/X11/X).
4. ( SR: 8606454477 CR: JAGag11121 )
There is only one possible graphics display on Radeon
7000 graphics.
Resolution:
Fix SAM so that only one graphics display is shown for
Radeon 7000.
5. ( SR: 8606452818 CR: JAGag09617 )
'Accelerate Indirect Rendering' is not valid on Radeon
graphics cards.
Resolution:
Remove 'Accelerate Indirect Rendering' from Radeon's
Screen Option list.
6. ( SR: 8606452816 CR: JAGag09615 )
To see this problem on a Radeon graphics card, run SAM
(/usr/sbin/sam) and set a Screen Option to 'Set' and
'True'. The XF86Config file is created correctly. Now
change the setting to 'Not Set' and save. The
XF86Config file (/etc/X11/XF86config) still has the
option Set.
Resolution:
SAM correctly removes the option when Not Set.
7. ( SR: 8606430400 CR: JAGaf89859 )
When 'Modify Default Visual' is selected in SAM for a
Radeon graphics card, the user is prompted to modify the
DefaultVisualTrueColor option in the Modify Screen
Options menu. The DefaultVisualTrueColor option is not
Resolution:
Add a default visual option for Radeon devices.
8. ( SR: 8606430276 CR: JAGaf89735 )
SAM does not correctly configure SLS on Radeon graphics
cards.
Resolution:
SAM correctly configures SLS on Radeon cards.
9. ( SR: 8606430274 CR: JAGaf89733 )
SAM cannot be used to select multi-screen configurations
for Radeon graphics cards.
Resolution:
Add multi-screen support to SAM for Radeon graphics.
PHSS_32960:
( SR: 8606431855 CR: JAGaf91297 )
The MIT-SHM extension is meant for local use, but the
extension did not always explicitly ensure the client
was local before executing MIT-SHM setup requests. This
could result in an XError during the processing of
subsequent MIT-SHM requests.
Resolution:
If the MIT-SHM extension detects that the client is not
local during its setup calls, it will generate a
BadAccess error at at time so that the client can detect
this condition sooner and fall back to core rendering.
( SR: 8606431660 CR: JAGaf91102 )
The coordinate limits imposed upon pixmap dimensions via
XCreatePixmap() did not match the legal limits of the X
coordinate space. Therefore, large dimensions might be
denied, even though they fit within the X coordinate
space.
Resolution:
The coordinate limits for XCreatePixmap() calls have
been adjusted to allow the correct values.
( SR: 8606430933 CR: JAGaf90376 )
The problem occurs on Radeon 7500 only, with dot clock
frequencies between 175MHz and 200 MHz. This can only
happen on the analog (VGA) connector, not the digital
(DVI) connector.
Resolution:
The PLL operating parameters were retrieved
incorrectly from the video BIOS. Driver code was
changed to fix the problem.
( SR: 8606430463 CR: JAGaf89922 )
These are actually two distinct problems:
1. The following resolutions don't sync up on Radeon
7500 with DVI-D signal:
1280x1024 @ 85 Hz
1600x1200 @ 60 Hz
2. The following resolutions don't set the correct
timing as reported by the monitor:
1024x768 @ 60Hz monitor reports 51 Hz
1024x768 @ 70Hz monitor reports 59 Hz
1024x768 @ 75Hz monitor reports 63 Hz
1024x768 @ 85Hz monitor reports 74 Hz
Resolution:
Code was fixed to initialize the CRTC registers
correctly.
( SR: 8606430092 CR: JAGaf89551 )
When selecting the same resolution as the resolution
that is already set, an uninitialized variable was used
as the basis for a length field. If the value of this
uninitialized variable was large, we could end up with
an incorrect length in the request structure.
Resolution:
The uninitialized variable is now initialized.
( SR: 8606390246 CR: JAGaf50392 )
SAM does not restart the X server when the resolution is
changed and the CDE login screen is displayed. The
option to restart the X server should be offered no
matter what state the X server is in. The user has
changed the resolution and may want that change to take
effect immediately.
Resolution:
Allow SAM to restart the Xserver whenever the user
changes screen resolution.
( SR: 8606390245 CR: JAGaf50391 )
The resolutions that are available when ATI based cards
are configured are determined by the X server. SAM gets
all its supported monitor resolutions from the X server
so there are no resolutions that are NOT supported. The
"Monitor Supports" column is unneeded.
Resolution:
Removed the "Monitor Supports" column from the "Display
Monitor Timing" screen for the specified devices.
( SR: 8606378653 CR: JAGaf38911 )
Setmon currently only informs the user what graphics
device is being configured and what the supported
timings are for that device/monitor pair.
Resolution:
The new implementation of setmon uses DDC information
obtained from the monitor when providing information
about supported timings for the graphics card/monitor
pair. Information regarding the type of monitor
(vendor, model, serial #, connection type) is also
available to setmon in the DDC information. By
providing a new option (-M) the user can now get the
monitor information if it is available from the monitor.
( SR: 8606378480 CR: JAGaf38738 )
Systems in Xinerama mode have multiple monitors. When
DPMS is enabled with SAM, only the first monitor
associated with the Xinerama layout will be put into
power saving mode, the other monitors will remain
active.
Resolution:
To put all the monitors associated with the Xinerama
layout SAM needs to track down all the "Monitor"
sections in the XF86Config file that are associated with
the Xinerama layout and add the DPMS option to those
sections.
( SR: 8606372295 CR: JAGaf32702 )
DrawArc() doesn't draw an arc in case of large width &
height parameter values. For example: XDrawArc(dpy,
win, gc, 0, -18000, 45001, 45000, 0, 360*64); Note that
pure circle is correct: XDrawArc(dpy, win, gc, 0,
-18000, 45000, 45000, 0, 360*64);
Resolution:
Code was fixed to render the arc. An additional fix was
also needed to remove some glitches from the arc
rendering. The glitches were due to imprecise floating
point math. An algorithm using long long integer
(64-bit) math was used instead.
PHSS_32953:
( SR: 8606419692 CR: JAGaf79522 )
XCreatePixmap() behaves incorrectly in certain
circumstances.
Resolution:
Fixed XCreatePixmap().
( SR: 8606413877 CR: JAGaf73736 )
The X server lock file is expected to contain the
process ID (PID) of a running X server process. If the
X server terminates unexpectedly, it may leave behind a
lock file. If a new process on a subsequent boot of the
system is using the same PID as the previous X server,
the X server will fail to start.
Resolution:
Remove all X server lock files at system startup via the
xf86 init script.
PHSS_31252:
( SR: 8606379334 CR: JAGaf39583 )
This product update contains some minor enhancements
required to enable the expansion of the nodename and
hostname.
Resolution:
Internal buffers for the nodename are expanded to
accommodate the expansion of the nodename and hostname.
( SR: 8606371890 CR: JAGaf32309 )
The routines that are involved in the backing store
mechanism were not getting called in the proper
sequence.
Resolution:
The routines that are involved in the backing store
mechanism are now called in the proper sequence.
( SR: 8606351635 CR: JAGaf12440 )
The algorithm graphdiag uses to determine how much
texture memory to test is insufficient for devices that
have a swappable texture cache or use software
texturing. The graphdiag process can exceed it's
maximum data space when run on these devices.
Resolution:
Change graphdiag to limit the texture test data size.
( SR: 8606391742 CR: JAGaf51874 )
The noise shows up as streaks the size of a dash
character. It is fixed by enabling coherent mode on the
TMDS digital transmitter by default. Coherent mode can
be turned on/off by using the "TMDSCoherentMode" option
in the display section of the XF86Config file.
Resolution:
X server was changed to fix the noise problem.
( SR: 8606391679 CR: JAGaf51811 )
Modify the Xserver to use an alternate set of device
files for the USB keyboard and mouse.
( SR: 8606390696 CR: JAGaf50842 )
The DPI will be off by a factor of 2 when monitors
without DDC/EDID are used.
Resolution:
X server was changed to set the DPI correctly.
( SR: 8606389388 CR: JAGaf49536 )
An SLS configuration on FireGL X1/Z1 displays has a
Horizontal sync pulse with the wrong polarity on one of
the two displays. This may affect the image size and
aspect ratio on some monitors.
Resolution:
X server code was changed to set the polarity correctly.
( SR: 8606378137 CR: JAGaf38395 )
The reference count handling of GLX pixmaps in the
Xserver could get out of sync, resulting in a situation
where the reference count would not get down to 0 when
it should. As a result, the Xserver would not free all
memory associated with the pixmap when
glXDestroyGLXPixmap() was called.
Resolution:
The memory management has been fixed to free the GLX
pixmap memory in the Xserver at the appropriate time.
( SR: 8606371981 CR: JAGaf32399 )
When an ATI Radeon 7000 graphics device is configured
for Xinerama, the Xserver does not properly handle
windows spanning multiple screens, particularly when the
window was partially obscured.
Resolution:
The Xserver was modified to handle the XCopyArea()
request on windows spanning multiple physical screens
more correctly when an ATI Radeon 7000 is configured for
Xinerama.
( SR: 8606371853 CR: JAGaf32271 )
When an ATI Radeon 7000 graphics device is configured
for Xinerama, the Xserver does not always set the error
value for BadWindow error cases correctly. As a result,
applications, such as the dtwm/mwm window managers may
destroy a valid window. This causes future requests for
that window to generate a BadWindow error.
Resolution:
When the Xserver is in a Xinerama configuration and
generates a BadWindow error, it now sets the error value
field to that of the invalid window ID. This prevents
applications that detect BadWindow errors from
destroying valid windows.
( SR: 8606371168 CR: JAGaf31586 )
The _HP_SLS_CONFIGURATION_INFO property on the ATI
FireGL X1/Z1 devices incorrectly lists the overall
resolution instead of the per-screen resolution
information.
Resolution:
The property has been modified to follow the same
pattern as other graphics devices.
( SR: 8606368639 CR: JAGaf29201 )
Setmon incorrectly displays the hardware SLS timing
entries for the ATI FireGL4. These modes should not be
displayed by setmon since SLS is configured by SAM, not
by setmon.
Resolution:
Setmon ignores resolutions reserved for hardware SLS
configurations for the ATI FireGL4.
( SR: 8606397605 CR: JAGaf57587 )
Added support for the ATI Radeon 7500 graphics card.
PHSS_30872:
( SR: 8606394923 CR: JAGaf54937 )
Changes required by kernel modifications in graphics
hardware mapping.
PHSS_30505:
( SR: 8606368805 CR: JAGaf29367 )
Setmon attempts to get the timing information from the X
server but since the X server is grabbed by the CDE
login screen it can't get the information and it can't
talk to the hardware to get the DDC information on its
own.
Resolution:
The X server now stores its DDC timing information in
the driver so that setmon can retrieve the information
when an X server grab is active.
( SR: 8606349293 CR: JAGaf10114 )
The file descriptors corresponding to client connections
are managed such that the Xserver's internal file
descriptors count against the number of clients that the
Xserver can accept.
Resolution:
The Xserver's internal file descriptors no longer count
against the number of clients that can connect.
( SR: 8606364816 CR: JAGaf25455 )
The Xserver's full screen crosshair cursor
(_HP_CROSSHAIR_CURSOR) on the FireGL X1/Z1 graphics card
can occasionally leave XOR dropping on the screen at the
intersections of windows.
Resolution:
Corrected cursor hotspot and window clip computations in
the software full screen crosshair cursor driver code.
( SR: 8606362676 CR: JAGaf23342 )
The FireGL X1/Z1 driver is incorrectly identifying
non-stereo windows (in stereo mode) that need to be
copied from the left image bank to the right image bank.
Also these copies are failing to include the window's
border. This results in some OpenGL stereo windows
appearing with the left image in both eyes.
Resolution:
The X Server FireGL X1/Z1 driver has been corrected to
only copy non-stereo windows contents for the left image
to the right image buffer.
PHSS_30502:
( SR: 8606347981 CR: JAGaf08803 )
The ability to dynamically disconnect/reconnect USB
input devices is not supported in the Xserver.
Resolution:
This functionality has been added to the Xserver. As a
result, if USB keyboard and mouse devices are removed
from the system, the Xserver will be able to use them
when they are reconnected to the host.
( SR: 8606356367 CR: JAGaf17075 )
The FireGL X1/Z1 graphics cards support stereo
operation. This mode is activated in the
/etc/X11/XF86Config file (or via SAM). When enabled
both stereo and non-stereo visuals are supported in the
image planes. If an application creates a window in the
image planes using a non-stereo visual and then opens
the window using the OpenGL API, subsequent Xlib
rendering to this window will only appear in the left
stereo image.
Resolution:
The graphics driver for the FireGL X1/Z1 has been
corrected to always display Xlib rendering to non-stereo
visuals in both left and right images. Additionally
Xlib rendering to stereo windows that have not been
opened by the OpenGL API will appear in both left and
right images. Xlib rendering to an OpenGL opened stereo
window will only appear in the left image buffer.
( SR: 8606350973 CR: JAGaf11785 )
1280x1024 @ 75 Hz timing does not work on HP2035 monitor
with ATI Fire GL4.
( SR: 8606351810 CR: JAGaf12615 )
The X Server should document how to enable backing store
functionality, as it is off by default on devices such
as ATI Fire GL4, ATI FireGL X1/Z1.
Resolution:
This information has been added to the "info" file and
is delivered in
/usr/lib/hpux32/X11/Xserver/info/screens/xf86
( SR: 8606350848 CR: JAGaf11660 )
When the X process is killed with kill -9, but 3D
processes are still running, if the 3D process sees the
graphics card as hung and tries to do a card reset, the
3d process will get put to sleep waiting for an answer
from X. Since X is already killed, X can't answer.
Resolution:
The reset code checks and makes sure the X process is
still active before putting the 3D process to sleep
waiting for a signal from X. If X is already killed,
the 3d process exits the reset code without sleeping.
( SR: 8606350693 CR: JAGaf11505 )
The X Server does not always lock the graphics device
properly.
( SR: 8606348718 CR: JAGaf09539 )
Support was added for the L2335 monitor to operate at
1920x1200 resolution on the following displays:
ATI FireGL X1/Z1, ATI Fire GL4, ATI Radeon 7000
The Digital DVI interface is recommended for best image
quality.
( SR: 8606348342 CR: JAGaf09164 )
Any logical functions set in the GC will be ignored when
drawing a dashed line on the FireGL X1/Z1 displays.
( SR: 8606348182 CR: JAGaf09004 )
The problem occurs when XCopyArea is given a source
rectangle that lies partly or completely outside the X
server limits of +/- 32K.
( SR: 8606346787 CR: JAGaf07611 )
Specifying a gamma value in the Monitor section of the
XF86Config file does not change the gamma value of the
image planes for ATI FireGL X1/Z1 devices. The driver
uses this value to initialize the gamma value used in
the overlay planes. It then comes in later and resets
the gamma for both the overlays and image planes as if
the config value never existed. Gamma initialization
within the driver needs some attention/rework.
Resolution:
Rework the gamma initialization code within the driver.
( SR: 8606346647 CR: JAGaf07471 )
The XDisplayWidthMM function returns a wrong value that
is off by a factor of 2. The xdpyinfo command uses this
value to report DPI resolution of the screen. This
causes problems with applications that use the DPI for
selecting font sizes, for example.
( SR: 8606346569 CR: JAGaf07393 )
Accelerated rendering of lines got disabled in the X
server on the ATI FireGL X1/Z1 displays.
Resolution:
Re-enabled accelerated rendering of lines in the X
server.
( SR: 8606345922 CR: JAGaf06768 )
An ATI FireGL X1 display adapter is running in SLS
display mode. After 2 login/logout sequences via CDE,
the video display connected to the 2nd video connector
reports a loss of signal.
( SR: 8606345593 CR: JAGaf06441 )
Add a gamma setting to the Monitor section of the
XF86Config file and start the X server. Notice that the
gamma setting applies to both image and overlay windows.
Resolution:
Add a keyword, "GammaAllLayers", that when used in the
Monitor section will cause the gamma setting there to
apply to both image and overlay windows. By default,
the monitor gamma setting in the config file will only
apply to image windows.
( SR: 8606345585 CR: JAGaf06433 )
Change the gamma value in image mode to something other
than the default. Exit the tool and start it up again.
Notice that the value of the slider does not reflect the
setting you last entered.
Resolution:
Ensure that the gamma tool reflects the current setting
at startup.
( SR: 8606345036 CR: JAGaf05886 )
SAM allows the user to configure the X server into a
multi-screen mode on OEM devices. This configuration is
not supported for OEM devices and the config file that
is written out does not set the system up into a
multi-screen mode it leaves the system in a non usable
mode.
Resolution:
Grey out the "Modify Multi-Screen Layout" option if SAM
detects that the devices selected are OEM graphics
devices.
( SR: 8606344460 CR: JAGaf05310 )
The routine that paints the window background uses the
wrong clip list information for overlay windows.
Resolution:
The routine that paints the window background now uses
the correct clip list information for overlay windows.
( SR: 8606341880 CR: JAGaf02787 )
The font library incorrectly concludes that the socket()
call failed. The call succeeds, but the code
incorrectly rejects it.
Resolution:
The font library now correctly accepts the valid return
value from the socket() call when adding a font server
to the font path.
( SR: 8606341717 CR: JAGaf02624 )
SAM will hang, waiting to grab the X server, if you
attempt to access the graphics device while the CDE
login is active. You must be running SAM remotely. The
CDE login screen has the X server grabbed until someone
logs in.
Resolution:
Provide a timeout when attempting to grab the X server.
If SAM is able to grab the X server in the allotted time
then everything works just fine. If the timeout
happens, SAM will issue a warning to the user telling
them what happened and the possible causes.
( SR: 8606340535 CR: JAGaf01454 )
Turn off channel lock in the gamma tool and move the
red, green and blue sliders independently. Notice that
the red and green sliders do not have any effect.
Resolution:
The X server was handling the gamma request incorrectly
in a way that caused the red and green values to be
ignored.
( SR: 8606340464 CR: JAGaf01383 )
When you change the DPMS "Blank Time" interval on the
SAM DPMS screen the change has no effect since the
"Blank Time" interval is overridden by CDE upon startup.
Resolution:
Remove the "Blank Time" interval from the SAM DPMS
screen so the user does not think they can control that
value here. Remove the manipulation of the "Blank Time"
interval from SAM entirely.
( SR: 8606340462 CR: JAGaf01381 )
When you turn DPMS ON in SAM, on the ServerOptions->DPMS
screen, if you hit Cancel instead of OK, DPMS is still
marked as ON but the DPMS time fields are not
modifiable. SAM thinks that DPMS is really OFF even
though the screen indicates it is ON.
Resolution:
The flag for the current state of DPMS should not be
updated until the OK or Cancel buttons are selected.
( SR: 8606340450 CR: JAGaf01369 )
If you set a gamma value in image mode, say 2.0, and
then switch to image and overlay mode, the slider will
still indicate that gamma is 2.0, but the overlay planes
will not display with this setting.
Resolution:
Add code to radio button callback that activates the
current gamma setting in the appropriate layers.
( SR: 8606339969 CR: JAGaf00890 )
The X server unlocks the device twice at server
shutdown. On the second call, the server no longer
holds the lock (due to the first call) and an error
message is displayed.
Resolution: Remove the error message as the extra unlock
call is benign.
( SR: 8606330357 CR: JAGae91480 )
In the SAM "Monitor Configuration" screen with a ATI
Fire GL4 both heads are labeled "ATI Fire GL4(0)". The
2nd head isn't greyed out even if it's not enabled.
These 2 characteristics can make it very confusing to
the user.
Resolution:
The names for multi headed ATI graphics devices should
have the connector number appended to the names
displayed. This is consistent with the way that SAM
"Server Configuration" displays the multiple heads on a
device.
( SR: 8606330355 CR: JAGae91478 )
When using SAM to modify the monitor type the user has 2
options; do nothing and lose the changes or restart the
X server immediately. To allow the user to continue in
the current session a 3rd option is necessary, write the
config file with the new settings and notify the user
that the settings will become active the next time the X
server is restarted.
Resolution:
When the monitor timing is changed for a device using
SAM the user will be presented with a "Restart the X
Server" dialog. If the user enters "Yes" the X server
will be restarted. If the user enters "No" the changes
will be saved to the configuration file and the user
will be notified that the changes will become active
when the X server is restarted.
( SR: 8606318220 CR: JAGae80746 )
On ATI Radeon 7000 graphics cards SAM does not write out
the XF86Config file if a screen option such as
"AccelerateIndirectRenderingOption" is unset.
Resolution:
The flag that SAM used to decide whether or not an
option had been changed was not being updated properly.
Update the flag appropriately so that the routine that
updates the XF86Config file knows which options to write
out.
( SR: 8606308216 CR: JAGae71251 )
When SAM is being used to configure the default visuals
on an ATI Radeon 7000 the user is allowed to select 24
bit PseudoColor visuals and 8 bit TrueColor visuals.
The only visual available in 24 bit depth is TrueColor
and the only visual available in 8 bit depth is
PseudoColor.
Resolution:
Provide the correct error checking (based on device
type) to only present the correct depth/visual classes
that are supported for that type of device.
( SR: 8606299003 CR: JAGae62499 )
The Xlib calls XGetImage and XCopyArea were originally
implemented without DMA acceleration.
Resolution:
A new implementation uses DMA. A defect was also fixed
where the top padding byte of 24-bit pixel data was not
getting cleared and contained junk left behind by 3D
Alpha blending.
( SR: 8606357394 CR: JAGaf18094 )
The X server did not perform proper synchronization
before updating the cursor image. This could result in
incorrect 3D data being sent to the device.
Resolution:
Perform the proper synchronization in the driver's
cursor code.
( SR: 8606354473 CR: JAGaf15266 )
OpenGL uses a default gamma value of 1.7. PHIGS clients
use a default of 1.0. Running clients using different
APIs back-to-back will result in the gamma value
changing back and forth between these values.
Resolution:
Enforce a precedence among the various mechanisms
available to change gamma. Settings made using the
gamma tool (/opt/graphics/common/bin/gamma) will have
the highest precedence. Below that, any setting present
in the /etc/X11/XF86Config file will take precedence.
Finally, settings requested by clients are considered.
( SR: 8606353562 CR: JAGaf14356 )
The parser module, used by the gamma tool, does not
ensure that the "C" locale is selected before outputting
the XF86Config file.
Resolution:
Explicitly set the locale to "C" in the parser module
before writing the config file. Restore the locale
after the config file is written.
( SR: 8606340568 CR: JAGaf01486 )
To reproduce, move the crosshair cursor quickly down
from the coordinate input boxes near the upper right
hand portion of the main window. Interference with the
tooltips is required to produce the dropping. So, it's
best to hover over the coordinate window and allow the
tooltip to appear. Then, move the cursor swiftly down.
Periodically, red droppings will occur.
Resolution:
Crosshair cursor driver code needed to be fixed to
address this issue.
PHSS_30171:
( SR: 8606348725 CR: JAGaf09546 )
Problem in font libraries.
( SR: 8606346322 CR:JAGaf07149 )
After loading Xserver patch PHSS_29710 system, the new
DLKMs are copied to /usr/conf/mod but do not always get
copied to /stand/current/mod.
PHSS_29710:
( SR: 8606341863 CR:JAGaf02770 )
The new revision of the Management Processor Card, Rev
B, contains DDR RAM. This new RAM requires new
initialization code from the BIOS in order to initialize
the card correctly. It also requires a change in the
hardware init DLKM for Radeon (gvid_him_rad) in order to
function properly. This change provides the support
necessary in the Radeon hardware init DLKM to properly
initialize the card.
Resolution:
A new BIOS revision in conjunction with a new Radeon
hardware init DLKM is required to use the new Rev B
Management Processor Card (A7231-66580).
( SR: 8606329206 CR: JAGae90330 )
Problem with fonts.
Resolution:
Fonts load correctly.
( SR: 8606307093 CR: JAGae70128 )
graphinfo reports the depth for only one overlay plane
buffer, while sam reports the depth of both buffers
combined.
Resolution:
sam was changed to now only report the depth of one
overlay plane buffer.
( SR: 8606320219 CR: JAGae82703 )
When the DISPLAY variable is fully qualified (e.g.
machinename.hp.com:0 instead of just machinename:0), and
when running the gamma tool and attempting to update the
XF86Config or X0screens file, an error message was
output due to sam believing machinename was a remote
system. Changing the XF86Config or X0screens file on a
remote system is not allowed.
Resolution:
Add additional parsing to sam so it correctly recognizes
fully qualified machine names.
( SR: 8606308213 CR: JAGae71248 )
The tool does not change the gamma values for the
devices. The "Image" and "Image and Overlay" buttons do
not work either.
Resolution:
The Gamma Correction tool was updated to work correctly
on these devices. Device driver changes were also made.
Note that the tool's behavior is dependent on the
image/overlay plane configuration of the device. See
the "Help" text within the tool itself (accessible via
the "Help" button on the tool) for more details.
(SR: 8606313395 CR: JAGae76193 )
The Gamma Correction tool "Cancel" button does not
"Cancel" any gamma changes, but rather behaves just like
the "OK" button (ie. saves the changes).
Resolution:
The Gamma Correction tool was changed so that "Cancel"
really does "Cancel" gamma changes made since the tool
was brought up
( SR: 8606324111 CR: JAGae86576 )
The ATI FireGL4 driver was incorrectly assuming
that the overlay planes were enabled in some cases. In
addition, there was a case where image plane data was
incorrectly copied at the wrong time.
Resolution:
The driver now checks if the overlay planes are enabled
prior to performing some window move operations. In
addition, the image plane data is only copied once when
overlay planes are disabled (and DRI is enabled).
( SR: 8606330522 CR: JAGae91645 )
The sample Xserver configuration file and the "info"
file delivered direct users to the GAG but do not tell
users where to easily find this document.
Resolution:
The sample Xserver configuration file and the "info"
file have been updated to point users to an on-line
version of the Graphics Administration Guide at:
http://www.hp.com/support/workstation_manuals
( SR: 8606334950 CR: JAGae96027 )
Some paths in the ATI FireGL4 kernel module were not
using semaphores correctly.
Resolution:
The code that uses semaphores was fixed to ensure that
acquired semaphores are properly released.
( SR: 8606338932 CR: JAGae99878 )
The function name did not exist.
Resolution:
'sam' now uses the correct function name, so the name
resolves at runtime.
( SR: 8606338933 CR: JAGae99879 )
'sam' would properly switch the devices, the the device
icons would also switch, making it appear that the
change did not occur.
Resolution:
'sam' now sorts the device icons in a manner such that
they will remain in the same position on the screen
during its execution. As a result, it is easier to
visually detect that the new graphics device has been
configured.
( SR: 8606308221 CR: JAGae71256 )
Sam should not allow the user to select "Vertical SLS"
as an option when it detects an ATI FireGL4 graphics
device.
Resolution:
'sam' no longer presents an active "Vertical SLS" toggle
as a configuration option on the ATI FireGL4 graphics
device
( SR: 8606339081 CR: JAGaf00017 )
Xvfb did not recognize that the IPv4-mapped address of
'localhost' IP address.
Resolution:
Xvfb now recognizes the IPv4-mapped address of
'localhost' as a local address that should be granted
access.
Enhancement:
No (superseded patches contained enhancements)
PHSS_32960:
- Support added for the ATI Radeon 7500 graphics card
on PA platforms.
PHSS_31252:
- Modify the Xserver to use an alternate set of device
files for the USB keyboard and mouse.
- Support added for future maximum length expansion of
nodename and hostname.
- Support added for the ATI Radeon 7500 graphics card
PHSS_30505:
Rearchitected setmon for the following graphics cards:
ATI FireGL4, ATI FireGL X1, ATI FireGL Z1. As of this
patch setmon no longer advertises monitor or graphics
card timings that may or may not be supported by the
monitor or graphics card. The new setmon communicates
with the X server to get the list of supported timings
that the driver has determined are valid through use of
DDC and internal logic. The output of setmon has
changed with the rearchitecture.
PHSS_30502:
( SR: 8606347981 CR: JAGaf08803 )
The ability to dynamically disconnect/reconnect USB
input devices has been added to the Xserver. As a
result, if USB keyboard and mouse devices are removed
from the system, the Xserver will be able to use them
when they are reconnected to the host
SR:
8606341863 8606329206 8606307093 8606320219 8606308213
8606313395 8606324111 8606330522 8606334950 8606338932
8606338933 8606308221 8606339081 8606346322 8606348725
8606340568 8606353562 8606354473 8606357394 8606299003
8606308216 8606318220 8606330355 8606330357 8606339969
8606340450 8606340462 8606340464 8606340535 8606341717
8606341880 8606344460 8606345036 8606345585 8606345593
8606345922 8606346569 8606346647 8606346787 8606348182
8606348342 8606348718 8606350693 8606350848 8606351810
8606350973 8606356367 8606347981 8606362676 8606364816
8606349293 8606368805 8606368639 8606371168 8606371853
8606371981 8606378137 8606389388 8606390696 8606391679
8606391742 8606351635 8606371890 8606379334 8606397605
8606394923 8606413877 8606419692 8606372295 8606378480
8606378653 8606390245 8606390246 8606430092 8606430463
8606430933 8606431660 8606431855 8606430274 8606430276
8606430400 8606452816 8606452818 8606454477 8606454487
8606440362 8606455038 8606473992 8606475128 8606475807
8606475834
Patch Files:
Xserver.OEM-SERVER,fr=B.11.23,fa=HP-UX_B.11.23_IA,v=HP:
/etc/rc.config.d/xf86
/opt/graphics/common/ReleaseNotes
/opt/graphics/common/bin/.sysinfo
/opt/graphics/common/bin/gamma
/opt/graphics/common/bin/graphdiag
/opt/graphics/common/bin/setmon
/opt/graphics/common/kernel/drmfgl/hpux64/drmfgl
/opt/graphics/common/kernel/drmfglrx/hpux64/drmfglrx
/opt/graphics/common/kernel/gvid_hw_init/cons/hpux64/
gvid_him_cons
/opt/graphics/common/kernel/gvid_hw_init/firegl23/hpux64/
gvid_him_fgl
/opt/graphics/common/kernel/gvid_hw_init/radeon/hpux64/
gvid_him_rad
/opt/graphics/common/kernel/gvid_info/hpux64/gvid_info
/opt/graphics/common/lib/hpux32/libOglTest.so.1
/opt/graphics/common/lib/hpux32/libXTest.so.1
/opt/graphics/common/lib/hpux32/libdrm.so.1
/opt/graphics/common/lib/hpux64/libdrm.so.1
/opt/graphics/common/lib/libgrm.1
/opt/graphics/common/lib/libgrm.2
/opt/graphics/common/lib/nls/msg/C/graphdiag.cat
/opt/graphics/common/lib/pa20_64/libgrm.1
/opt/graphics/common/lib/pa20_64/libgrm.2
/opt/graphics/common/man/man1.Z/graphdiag.1g
/opt/graphics/common/man/man1.Z/setmon.1
/opt/hpsmh/data/htdocs/xlaunch/xml/graphics_tools.xml
/sbin/init.d/xf86
/usr/bin/X11/X
/usr/bin/X11/Xf86
/usr/bin/X11/Xhp
/usr/bin/X11/Xvfb
/usr/bin/X11/lbxproxy
/usr/bin/X11/xf86config_convert
/usr/contrib/bin/X11/keymap_ed
/usr/contrib/man/man1.Z/keymap_ed.1
/usr/lbin/grmd
/usr/lib/X11/Xserver/info/screens/hp
/usr/lib/X11/Xserver/loadinit/libinit.1
/usr/lib/X11/Xserver/misc/sam/C/help/sam.hv
/usr/lib/X11/Xserver/misc/sam/C/help/sam.hvk
/usr/lib/X11/Xserver/misc/sam/C/help/sam00.ht
/usr/lib/X11/Xserver/misc/sam/C/icons/config.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/monitor.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/nosetmon.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/printconfig.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/setmon.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/sls.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/terminal.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/toplevel.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/unconfig.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/xconfig.pm
/usr/lib/X11/Xserver/misc/sam/C/sam.cb
/usr/lib/X11/Xserver/misc/sam/C/sam.ui
/usr/lib/X11/Xserver/misc/sam/sam.sl
/usr/lib/X11/Xserver/modules/screens/hp/cfb.1
/usr/lib/X11/Xserver/modules/screens/hp/cfb16.1
/usr/lib/X11/Xserver/modules/screens/hp/cfb32.1
/usr/lib/X11/Xserver/modules/screens/hp/mfb.1
/usr/lib/X11/Xserver/modules/screens/hp/mi.1
/usr/lib/X11/Xserver/modules/screens/hp/utils.1
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/libFglRX.1
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/
libFglRX_RV350.1
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/
libFireGL.1
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/libR7000.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libDbe.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libDri.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libExtmod.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libGie.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libGlx.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libHPext.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libRecord.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/libSx.1
/usr/lib/X11/extensions/libGIE.1
/usr/lib/hpux32/X11/Xserver/info/screens/xf86
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/drivers/
libFglRX.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/drivers/
libFglRX_RV350.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/drivers/
libFireGL.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/drivers/
libR7000.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libDbe.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libDri.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libExtmod.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libGie.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libGlx.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libHPext.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libRecord.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libSx.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/libati.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/
libatimisc.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/
libfglrx.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/
libfiregl23.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/
libr128.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/
libradeon.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libdbe.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libdri.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libextmod.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libexts.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libgie.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libglx.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libhpext.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
librecord.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/fonts/
libbitmap.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/fonts/
libfontbase.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/hpux/
libfbdevhw.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/input/libmouse.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libbroker.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libddc.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libfb.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libi2c.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libint10.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/liblbx.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libloader.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libmfb.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libmi.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libpcidata.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/librac.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libramdac.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libscanpci.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libshadow.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libshadowfb.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libvbe.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libvfb.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libvgahw.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxaa.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxf24_32bpp.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxf86.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxf86_os.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxf86config.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxf8_32bpp.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxinput.so.1
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxkb.so.1
/usr/newconfig/etc/X11/SecurityPolicy
/usr/newconfig/etc/X11/XF86Config
/usr/newconfig/etc/X11/XHPKeymaps
/usr/newconfig/etc/X11/lbxproxy/AtomControl
/usr/newconfig/etc/X11/rgb.txt
/usr/newconfig/usr/lib/X11/extensions/libSX.1
/usr/newconfig/usr/lib/hpux32/X11/Xserver/modules/xf86/
extensions/libSX.so.1
/usr/share/man/man1.Z/X.1
/usr/share/man/man1.Z/Xf86.1
/usr/share/man/man1.Z/Xhp.1
/usr/share/man/man1.Z/Xserver.1
/usr/share/man/man1.Z/lbxproxy.1
/usr/share/man/man1.Z/xf86config_convert.1
Xserver.OEM-SERVER-PA,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/etc/rc.config.d/xf86
/opt/graphics/common/ReleaseNotes
/opt/graphics/common/bin/graphdiag
/opt/graphics/common/kernel/gvid_hw_init/cons/gvid_him_cons
/opt/graphics/common/kernel/gvid_info/gvid_info
/opt/graphics/common/lib/libOglTest.1
/opt/graphics/common/lib/libXTest.1
/opt/graphics/common/lib/libdrm.1
/opt/graphics/common/lib/nls/msg/C/graphdiag.cat
/opt/graphics/common/man/man1.Z/graphdiag.1g
/sbin/init.d/xf86
/usr/bin/X11/Xf86
/usr/bin/X11/Xvfb
/usr/bin/X11/xf86config_convert
/usr/lib/X11/Xserver/info/screens/xf86
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/
libFireGL.1
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/libR7000.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libDbe.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libDri.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libExtmod.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libGie.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libGlx.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libHPext.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libRecord.1
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/libSx.1
/usr/lib/X11/Xserver/modules/xf86/drivers/libati.1
/usr/lib/X11/Xserver/modules/xf86/drivers/libatimisc.1
/usr/lib/X11/Xserver/modules/xf86/drivers/libfiregl23.1
/usr/lib/X11/Xserver/modules/xf86/drivers/libr128.1
/usr/lib/X11/Xserver/modules/xf86/drivers/libradeon.1
/usr/lib/X11/Xserver/modules/xf86/extensions/libdbe.1
/usr/lib/X11/Xserver/modules/xf86/extensions/libdri.1
/usr/lib/X11/Xserver/modules/xf86/extensions/libextmod.1
/usr/lib/X11/Xserver/modules/xf86/extensions/libexts.1
/usr/lib/X11/Xserver/modules/xf86/extensions/libgie.1
/usr/lib/X11/Xserver/modules/xf86/extensions/libglx.1
/usr/lib/X11/Xserver/modules/xf86/extensions/libhpext.1
/usr/lib/X11/Xserver/modules/xf86/extensions/librecord.1
/usr/lib/X11/Xserver/modules/xf86/fonts/libbitmap.1
/usr/lib/X11/Xserver/modules/xf86/fonts/libfontbase.1
/usr/lib/X11/Xserver/modules/xf86/fonts/libfreetype.1
/usr/lib/X11/Xserver/modules/xf86/fonts/libspeedo.1
/usr/lib/X11/Xserver/modules/xf86/fonts/libtype1.1
/usr/lib/X11/Xserver/modules/xf86/fonts/libxtt.1
/usr/lib/X11/Xserver/modules/xf86/hpux/libfbdevhw.1
/usr/lib/X11/Xserver/modules/xf86/input/libmouse.1
/usr/lib/X11/Xserver/modules/xf86/libbroker.1
/usr/lib/X11/Xserver/modules/xf86/libddc.1
/usr/lib/X11/Xserver/modules/xf86/libfb.1
/usr/lib/X11/Xserver/modules/xf86/libi2c.1
/usr/lib/X11/Xserver/modules/xf86/libint10.1
/usr/lib/X11/Xserver/modules/xf86/liblbx.1
/usr/lib/X11/Xserver/modules/xf86/libloader.1
/usr/lib/X11/Xserver/modules/xf86/libmfb.1
/usr/lib/X11/Xserver/modules/xf86/libmi.1
/usr/lib/X11/Xserver/modules/xf86/libpcidata.1
/usr/lib/X11/Xserver/modules/xf86/librac.1
/usr/lib/X11/Xserver/modules/xf86/libramdac.1
/usr/lib/X11/Xserver/modules/xf86/libscanpci.1
/usr/lib/X11/Xserver/modules/xf86/libshadow.1
/usr/lib/X11/Xserver/modules/xf86/libshadowfb.1
/usr/lib/X11/Xserver/modules/xf86/libvbe.1
/usr/lib/X11/Xserver/modules/xf86/libvfb.1
/usr/lib/X11/Xserver/modules/xf86/libvgahw.1
/usr/lib/X11/Xserver/modules/xf86/libxaa.1
/usr/lib/X11/Xserver/modules/xf86/libxf24_32bpp.1
/usr/lib/X11/Xserver/modules/xf86/libxf86.1
/usr/lib/X11/Xserver/modules/xf86/libxf86_os.1
/usr/lib/X11/Xserver/modules/xf86/libxf86config.1
/usr/lib/X11/Xserver/modules/xf86/libxf8_32bpp.1
/usr/lib/X11/Xserver/modules/xf86/libxinput.1
/usr/lib/X11/Xserver/modules/xf86/libxkb.1
/usr/newconfig/etc/X11/XF86Config
/usr/newconfig/usr/lib/X11/Xserver/modules/xf86/extensions/
libSX.1
Xserver.AGRM,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/opt/graphics/common/bin/gamma
/opt/graphics/common/icons/Gamma.l.bm
/opt/graphics/common/icons/Gamma.l.pm
/opt/graphics/common/icons/Gamma.l_m.bm
/opt/graphics/common/icons/Gamma.m.bm
/opt/graphics/common/icons/Gamma.m.pm
/opt/graphics/common/icons/Gamma.m_m.bm
/opt/graphics/common/icons/Gamma.t.bm
/opt/graphics/common/icons/Gamma.t.pm
/opt/graphics/common/icons/Gamma.t_m.bm
/opt/graphics/common/lib/libgrm.1
/opt/graphics/common/lib/libgrm.2
/opt/graphics/common/lib/pa20_64/libgrm.1
/opt/graphics/common/lib/pa20_64/libgrm.2
/usr/lbin/grmd
/usr/share/man/man1m.Z/grmd.1m
Xserver.DDX-ADVANCED,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/lib/X11/Xserver/brokers/screens/Hcrx.1
/usr/lib/X11/Xserver/brokers/screens/Hcrx48z.1
/usr/lib/X11/Xserver/brokers/screens/HpCfb.1
/usr/lib/X11/Xserver/brokers/screens/Pinn.1
/usr/lib/X11/Xserver/brokers/screens/Rw.1
/usr/lib/X11/Xserver/brokers/screens/Wd.1
/usr/lib/X11/Xserver/brokers/vfb/Vfb.1
/usr/lib/X11/Xserver/modules/screens/hp/advutils.1
/usr/lib/X11/Xserver/modules/screens/hp/food.1
/usr/lib/X11/Xserver/modules/screens/hp/hcrx.1
/usr/lib/X11/Xserver/modules/screens/hp/hcrx48z.1
/usr/lib/X11/Xserver/modules/screens/hp/hpCfb.1
/usr/lib/X11/Xserver/modules/screens/hp/pinn.1
/usr/lib/X11/Xserver/modules/screens/hp/rw.1
/usr/lib/X11/Xserver/modules/screens/hp/wd.1
/usr/lib/X11/Xserver/modules/vfb/hp/vfb.1
Xserver.DDX-ENTRY,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/lib/X11/Xserver/brokers/screens/Cg.1
/usr/lib/X11/Xserver/brokers/screens/Cgg.1
/usr/lib/X11/Xserver/modules/screens/hp/cg.1
/usr/lib/X11/Xserver/modules/screens/hp/cgg.1
/usr/lib/X11/Xserver/modules/screens/hp/crxutils.1
/usr/lib/X11/Xserver/modules/screens/hp/ucrx.1
/usr/lib/X11/Xserver/modules/screens/hp/uhcrx.1
Xserver.DDX-LOAD,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/lib/X11/Xserver/info/screens/hp
/usr/lib/X11/Xserver/loadinit/libinit.1
Xserver.DDX-SAM,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/opt/graphics/common/bin/setmon
/opt/graphics/common/man/man1.Z/setmon.1
/opt/hpsmh/data/htdocs/xlaunch/xml/graphics_tools.xml
/usr/lib/X11/Xserver/misc/sam/C/help/sam.hv
/usr/lib/X11/Xserver/misc/sam/C/help/sam.hvk
/usr/lib/X11/Xserver/misc/sam/C/help/sam00.ht
/usr/lib/X11/Xserver/misc/sam/C/help/sls1.xwd
/usr/lib/X11/Xserver/misc/sam/C/help/sls2.xwd
/usr/lib/X11/Xserver/misc/sam/C/help/sls3.xwd
/usr/lib/X11/Xserver/misc/sam/C/help/sls4.xwd
/usr/lib/X11/Xserver/misc/sam/C/help/sls5.xwd
/usr/lib/X11/Xserver/misc/sam/C/icons/config.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/monitor.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/nosetmon.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/printconfig.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/setmon.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/sls.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/terminal.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/toplevel.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/unconfig.pm
/usr/lib/X11/Xserver/misc/sam/C/icons/xconfig.pm
/usr/lib/X11/Xserver/misc/sam/C/sam.cb
/usr/lib/X11/Xserver/misc/sam/C/sam.ui
/usr/lib/X11/Xserver/misc/sam/sam.sl
Xserver.DDX-SLS,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/sbin/init.d/slsd
/usr/bin/X11/SLSd_daemon
/usr/contrib/bin/X11/SLSd_config
/usr/contrib/bin/X11/slsconfine
/usr/lib/X11/Xserver/brokers/extensions/Slsdx.1
/usr/lib/X11/Xserver/brokers/extensions/Slsx.1
/usr/lib/X11/Xserver/brokers/screens/Sls.1
/usr/lib/X11/Xserver/brokers/screens/Slsd.1
/usr/lib/X11/Xserver/modules/extensions/hp/slsdx.1
/usr/lib/X11/Xserver/modules/extensions/hp/slsx.1
/usr/lib/X11/Xserver/modules/screens/hp/XslsdExt.1
/usr/lib/X11/Xserver/modules/screens/hp/sls.1
/usr/lib/X11/Xserver/modules/screens/hp/slsd.1
/usr/newconfig/etc/rc.config.d/slsd
Xserver.DDX-UTILS,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/lib/X11/Xserver/modules/screens/hp/cfb.1
/usr/lib/X11/Xserver/modules/screens/hp/cfb16.1
/usr/lib/X11/Xserver/modules/screens/hp/cfb32.1
/usr/lib/X11/Xserver/modules/screens/hp/mfb.1
/usr/lib/X11/Xserver/modules/screens/hp/mi.1
/usr/lib/X11/Xserver/modules/screens/hp/utils.1
Xserver.X11-SERV,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/bin/X11/X
/usr/bin/X11/Xhp
/usr/bin/X11/convertscr
/usr/bin/X11/lbxproxy
/usr/bin/X11/proxymngr
/usr/bin/X11/xfindproxy
/usr/bin/X11/xrx
/usr/contrib/X11R6/examples/xrx/cgi-bin/xclock.pl
/usr/contrib/X11R6/examples/xrx/cgi-bin/xload.pl
/usr/contrib/X11R6/examples/xrx/htdocs/xclock.html
/usr/contrib/X11R6/examples/xrx/htdocs/xclock.rx
/usr/contrib/X11R6/examples/xrx/htdocs/xload.html
/usr/contrib/X11R6/examples/xrx/htdocs/xload.rx
/usr/contrib/bin/X11/X.alt
/usr/contrib/bin/X11/keymap_ed
/usr/contrib/bin/X11/slsclone
/usr/contrib/doc/keymap_ed.doc
/usr/contrib/man/man1.Z/keymap_ed.1
/usr/lib/X11/Xserver/brokers/extensions/Gie.1
/usr/lib/X11/Xserver/brokers/extensions/PolyPrim.1
/usr/lib/X11/Xserver/brokers/extensions/Sync.1
/usr/lib/X11/Xserver/brokers/extensions/Xie.1
/usr/lib/X11/Xserver/input/daisy/README.daisy
/usr/lib/X11/Xserver/input/daisy/cfgdaisy
/usr/lib/X11/Xserver/input/daisy/chk_daisy
/usr/lib/X11/Xserver/input/daisy/deldaisy
/usr/lib/X11/Xserver/input/daisy/test_daisy.c
/usr/lib/X11/Xserver/input/daisy/xbutton.c
/usr/lib/X11/Xserver/input/daisy/xdial.c
/usr/lib/X11/Xserver/input/daisy/xlsdev
/usr/lib/X11/Xserver/input/tablet/README
/usr/lib/X11/Xserver/input/tablet/cfgtblt
/usr/lib/X11/Xserver/input/tablet/chk_tablet
/usr/lib/X11/Xserver/input/tablet/tabinit
/usr/lib/X11/Xserver/input/tablet/xtablet.c
/usr/lib/X11/Xserver/modules/extensions/hp/gie.1
/usr/lib/X11/Xserver/modules/extensions/hp/polyprim.1
/usr/lib/X11/Xserver/modules/extensions/hp/sync.1
/usr/lib/X11/Xserver/modules/extensions/hp/xie.1
/usr/lib/X11/extensions/button.kmap
/usr/lib/X11/extensions/daisy.1
/usr/lib/X11/extensions/db.1
/usr/lib/X11/extensions/hid.1
/usr/lib/X11/extensions/hil_driver.1
/usr/lib/X11/extensions/hp7lc2k.1
/usr/lib/X11/extensions/hp7lc2m.1
/usr/lib/X11/extensions/libGIE.1
/usr/lib/X11/extensions/lpfk.1
/usr/lib/X11/extensions/minibar.1
/usr/lib/X11/extensions/mmii1201.1
/usr/lib/X11/extensions/mmii1812.1
/usr/lib/X11/extensions/pcmouse.1
/usr/lib/X11/extensions/spaceball.1
/usr/lib/X11/extensions/vcd8.1
/usr/lib/X11/extensions/wacom.1
/usr/lib/X11R6/libxrx.6.3
/usr/newconfig/etc/X11/98xxx.dcc
/usr/newconfig/etc/X11/A10xx.dcc
/usr/newconfig/etc/X11/SecurityPolicy
/usr/newconfig/etc/X11/X0devices
/usr/newconfig/etc/X11/X0pointerkeys
/usr/newconfig/etc/X11/X0screens
/usr/newconfig/etc/X11/XHPKeymaps
/usr/newconfig/etc/X11/lbxproxy/AtomControl
/usr/newconfig/etc/X11/proxymngr/pmconfig
/usr/newconfig/etc/X11/rgb.txt.98xxx
/usr/newconfig/etc/X11/rgb.txt.A10xx
/usr/newconfig/usr/lib/X11/extensions/libSX.1
Xserver.X11-SERV-MAN,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/share/man/man1.Z/X.1
/usr/share/man/man1.Z/Xf86.1
/usr/share/man/man1.Z/Xhp.1
/usr/share/man/man1.Z/Xserver.1
/usr/share/man/man1.Z/lbxproxy.1
/usr/share/man/man1.Z/libxrx.1
/usr/share/man/man1.Z/proxymngr.1
/usr/share/man/man1.Z/xf86config_convert.1
/usr/share/man/man1.Z/xfindproxy.1
/usr/share/man/man1.Z/xrx.1
Xserver.XEXT-DBE,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/lib/X11/Xserver/brokers/extensions/Dbe.1
/usr/lib/X11/Xserver/modules/extensions/hp/dbe.1
Xserver.XEXT-DBE-MAN,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/share/man/man3.Z/DBE.3x
/usr/share/man/man3.Z/XdbeAllocat.3x
/usr/share/man/man3.Z/XdbeBeginId.3x
/usr/share/man/man3.Z/XdbeDealloc.3x
/usr/share/man/man3.Z/XdbeEndIdio.3x
/usr/share/man/man3.Z/XdbeFreeVis.3x
/usr/share/man/man3.Z/XdbeGetBack.3x
/usr/share/man/man3.Z/XdbeGetVisu.3x
/usr/share/man/man3.Z/XdbeQueryEx.3x
/usr/share/man/man3.Z/XdbeSwapBuf.3x
Xserver.XEXT-DPMS,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/lib/X11/Xserver/brokers/extensions/Dpms.1
/usr/lib/X11/Xserver/modules/extensions/hp/dpms.1
Xserver.XEXT-DPMS-MAN,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/share/man/man3.Z/DPMS.3x
/usr/share/man/man3.Z/DPMSCapable.3x
/usr/share/man/man3.Z/DPMSDisable.3x
/usr/share/man/man3.Z/DPMSEnable.3x
/usr/share/man/man3.Z/DPMSForceLe.3x
/usr/share/man/man3.Z/DPMSGetTime.3x
/usr/share/man/man3.Z/DPMSGetVers.3x
/usr/share/man/man3.Z/DPMSInfo.3x
/usr/share/man/man3.Z/DPMSQueryEx.3x
/usr/share/man/man3.Z/DPMSSetTime.3x
Xserver.XEXT-HPCR,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/lib/X11/Xserver/brokers/extensions/HpCr.1
/usr/lib/X11/Xserver/modules/extensions/hp/hpcr.1
Xserver.XEXT-HPCR-MAN,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/share/man/man3.Z/HP-COLOR-RE.3x
/usr/share/man/man3.Z/XhpCrGetCma.3x
/usr/share/man/man3.Z/XhpCrPutIma.3x
/usr/share/man/man3.Z/XhpCrQueryV.3x
Xserver.XEXT-MBX,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/lib/X11/Xserver/brokers/extensions/Mbx.1
/usr/lib/X11/Xserver/modules/extensions/hp/mbx.1
Xserver.XEXT-RECORD,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/usr/lib/X11/Xserver/brokers/extensions/Record.1
/usr/lib/X11/Xserver/modules/extensions/hp/record.1
what(1) Output:
Xserver.OEM-SERVER,fr=B.11.23,fa=HP-UX_B.11.23_IA,v=HP:
/etc/rc.config.d/xf86:
None
/opt/graphics/common/ReleaseNotes:
None
/opt/graphics/common/bin/.sysinfo:
None
/opt/graphics/common/bin/gamma:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
/opt/graphics/common/bin/graphdiag:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:09:32 IST 2007)
/opt/graphics/common/bin/setmon:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:58:00 IST 2007)
/opt/graphics/common/kernel/drmfgl/hpux64/drmfgl:
Built for HP-UX 11.23
(build date: Fri Mar 17 19:14:07 MST 2006)
DRM Major Version : 2
DRM Minor Version : 0
DRM Patchlevel : 0
DRM Description : Fire GL2/3 driver kernel module
DRM Date : Mar 17 2006
/opt/graphics/common/kernel/drmfglrx/hpux64/drmfglrx:
Built for HP-UX 11.23
(build date: Fri Mar 17 18:22:55 MST 2006)
DRM Version: 2.8.0
HP-OEM Mapping: 8.14.1
DRM Description: ATI FireGL DRM kernel module
DRM Date: Mar 17 2006
/opt/graphics/common/kernel/gvid_hw_init/cons/hpux64/
gvid_him_cons:
Built for HP-UX 11.23
(build date: Thu Feb 8 22:20:00 IST 2007)
HW init - Cons (Graphics HIM DLKM)
/opt/graphics/common/kernel/gvid_hw_init/firegl23/hpux64/
gvid_him_fgl:
hw_init (fireGL4 graphics HIM DLKM) $Revision: 1.3 $
$Date: 03/12/2003 $
Built for HP-UX 11.23
(build date: Fri Mar 17 19:15:15 MST 2006)
/opt/graphics/common/kernel/gvid_hw_init/radeon/hpux64/
gvid_him_rad:
None
/opt/graphics/common/kernel/gvid_info/hpux64/gvid_info:
Built for HP-UX 11.23
(build date: Thu Feb 8 22:21:50 IST 2007)
gvid_info (graphics DLKM)
/opt/graphics/common/lib/hpux32/libOglTest.so.1:
None
/opt/graphics/common/lib/hpux32/libXTest.so.1:
None
/opt/graphics/common/lib/hpux32/libdrm.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Fri Mar 17 18:23:17 MST 2006)
/opt/graphics/common/lib/hpux64/libdrm.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Fri Mar 17 19:28:56 MST 2006)
/opt/graphics/common/lib/libgrm.1:
GRM Library A.01 Protocol 100 $Revision: /main/13
$
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:52:22 IST 2007)
/opt/graphics/common/lib/libgrm.2:
GRM Library A.01 Protocol 100 $Revision: /main/13
$
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:53:45 IST 2007)
/opt/graphics/common/lib/nls/msg/C/graphdiag.cat:
None
/opt/graphics/common/lib/pa20_64/libgrm.1:
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:52:24 IST 2007)
GRM Library A.01 Protocol 100 $Revision: /main/13
$
/opt/graphics/common/lib/pa20_64/libgrm.2:
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:53:47 IST 2007)
GRM Library A.01 Protocol 100 $Revision: /main/13
$
/opt/graphics/common/man/man1.Z/graphdiag.1g:
None
/opt/graphics/common/man/man1.Z/setmon.1:
None
/opt/hpsmh/data/htdocs/xlaunch/xml/graphics_tools.xml:
None
/sbin/init.d/xf86:
$Revision: 1.2 $
/usr/bin/X11/X:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:15:23 IST 2007)
/usr/bin/X11/Xf86:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:56:29 IST 2007)
/usr/bin/X11/Xhp:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 21:07:07 IST 2007)
/usr/bin/X11/Xvfb:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:57:12 IST 2007)
/usr/bin/X11/lbxproxy:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:00:41 IST 2007)
/usr/bin/X11/xf86config_convert:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:58:07 IST 2007)
/usr/contrib/bin/X11/keymap_ed:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
keymap_ed v1.8
/usr/contrib/man/man1.Z/keymap_ed.1:
None
/usr/lbin/grmd:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
Graphics Resource Daemon $Revision: /main/19 $ $Date
: 1996/10/29 17:46:18 $
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:53:57 IST 2007)
$ B11.23_ic71k Apr 15 2004 20:20:23 $
/usr/lib/X11/Xserver/info/screens/hp:
X Server Information for HP Devices
$Revision: 57.8 $
$Date: 2004/07/15 23:55:35 $
/usr/lib/X11/Xserver/loadinit/libinit.1:
Initialization Utils
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:12:05 IST 2007)
SharedX Extension Hooks
Smart Clipping Utils
/usr/lib/X11/Xserver/misc/sam/C/help/sam.hv:
None
/usr/lib/X11/Xserver/misc/sam/C/help/sam.hvk:
None
/usr/lib/X11/Xserver/misc/sam/C/help/sam00.ht:
None
/usr/lib/X11/Xserver/misc/sam/C/icons/config.pm:
None
/usr/lib/X11/Xserver/misc/sam/C/icons/monitor.pm:
None
/usr/lib/X11/Xserver/misc/sam/C/icons/nosetmon.pm:
None
/usr/lib/X11/Xserver/misc/sam/C/icons/printconfig.pm:
None
/usr/lib/X11/Xserver/misc/sam/C/icons/setmon.pm:
None
/usr/lib/X11/Xserver/misc/sam/C/icons/sls.pm:
None
/usr/lib/X11/Xserver/misc/sam/C/icons/terminal.pm:
None
/usr/lib/X11/Xserver/misc/sam/C/icons/toplevel.pm:
None
/usr/lib/X11/Xserver/misc/sam/C/icons/unconfig.pm:
None
/usr/lib/X11/Xserver/misc/sam/C/icons/xconfig.pm:
None
/usr/lib/X11/Xserver/misc/sam/C/sam.cb:
None
/usr/lib/X11/Xserver/misc/sam/C/sam.ui:
Graphics Configuration $Revision: /main/30 $ $Date
: 1996/11/19 17:38:53 $
/usr/lib/X11/Xserver/misc/sam/sam.sl:
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Fri Feb 9 10:36:54 IST 2007)
X Server Configuration $Revision: /main/39 $ $Date
: 1996/11/19 17:39:28 $
/usr/lib/X11/Xserver/modules/screens/hp/cfb.1:
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 21:00:24 IST 2007)
/usr/lib/X11/Xserver/modules/screens/hp/cfb16.1:
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 21:04:28 IST 2007)
/usr/lib/X11/Xserver/modules/screens/hp/cfb32.1:
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 21:07:04 IST 2007)
/usr/lib/X11/Xserver/modules/screens/hp/mfb.1:
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:57:17 IST 2007)
/usr/lib/X11/Xserver/modules/screens/hp/mi.1:
MI Control Utilities
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 19:38:19 IST 2007)
/usr/lib/X11/Xserver/modules/screens/hp/utils.1:
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:27:50 IST 2007)
VM bit-per-pixel
VM byte-per-pixel
Control Utilities
DI Utilities
Device Driver Utils
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/
libFglRX.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:08:40 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/
libFglRX_RV350.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:08:47 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/
libFireGL.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:08:28 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/
libR7000.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:08:21 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libDbe.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:16 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libDri.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:02 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libExtmod.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:30 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libGie.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:23 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libGlx.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:09 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libHPext.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:44 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libRecord.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:50 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libSx.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:36 IST 2007)
/usr/lib/X11/extensions/libGIE.1:
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:03:12 IST 2007)
/usr/lib/hpux32/X11/Xserver/info/screens/xf86:
None
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/drivers/
libFglRX.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:53:49 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/drivers/
libFglRX_RV350.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:53:58 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/drivers/
libFireGL.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:53:40 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/drivers/
libR7000.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:53:33 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libDbe.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:54:24 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libDri.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:54:08 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libExtmod.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:54:42 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libGie.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:54:34 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libGlx.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:54:16 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libHPext.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:55:02 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libRecord.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:55:11 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/brokers/extensions/
libSx.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:54:49 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/
libati.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:44:17 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/
libatimisc.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:44:24 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/
libfglrx.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Fri Mar 17 19:22:25 MST 2006)
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/
libfiregl23.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Fri Mar 17 19:20:35 MST 2006)
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/
libr128.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:45:46 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/drivers/
libradeon.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:47:48 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libdbe.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:49:59 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libdri.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Fri Mar 17 19:05:37 MST 2006)
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libextmod.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:39:04 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libexts.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:37:09 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libgie.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:54:19 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libglx.so.1:
Obsolete module
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
libhpext.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:53:01 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/extensions/
librecord.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:52:04 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/fonts/
libbitmap.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 20:51:23 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/fonts/
libfontbase.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 20:57:33 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/hpux/
libfbdevhw.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:48:50 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/input/
libmouse.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:51:09 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libbroker.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:55:24 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libddc.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:50:45 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libfb.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:00:39 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libi2c.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:50:15 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libint10.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:51:22 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/liblbx.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:48:53 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libloader.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:48:23 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libmfb.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:58:06 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libmi.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:34:52 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libpcidata.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:53:19 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/librac.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:50:04 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libramdac.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:49:39 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libscanpci.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:53:11 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libshadow.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:16:28 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libshadowfb.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:39:39 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libvbe.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:23:12 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libvfb.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:57:06 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libvgahw.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:48:42 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxaa.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:36:57 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxf24_32bpp.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:39:01 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxf86.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:30:20 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxf86_os.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:23:18 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxf86config.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:52:44 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxf8_32bpp.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:38:03 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxinput.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:47:47 IST 2007)
/usr/lib/hpux32/X11/Xserver/modules/xf86/libxkb.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:45:39 IST 2007)
/usr/newconfig/etc/X11/SecurityPolicy:
None
/usr/newconfig/etc/X11/XF86Config:
None
/usr/newconfig/etc/X11/XHPKeymaps:
(build date: Fri Feb 9 10:31:56 IST 2007)
X Window System, Version 11 R6
Built for: 11.23 on HP-UX Daily, -O +Onolimit
This file contains keymaps.
It is usually called XHPKeymaps and is usually in
/etc/X11 or /usr/lib/X11.
Use keymap_ed to view or make changes.
/usr/newconfig/etc/X11/lbxproxy/AtomControl:
None
/usr/newconfig/etc/X11/rgb.txt:
None
/usr/newconfig/usr/lib/X11/extensions/libSX.1:
libSX.1.stubs : SharedX stubs library
Order MPower to get a real SharedX library
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:55:01 IST 2007)
/usr/newconfig/usr/lib/hpux32/X11/Xserver/modules/xf86/
extensions/libSX.so.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 21:53:28 IST 2007)
/usr/share/man/man1.Z/X.1:
None
/usr/share/man/man1.Z/Xf86.1:
None
/usr/share/man/man1.Z/Xhp.1:
None
/usr/share/man/man1.Z/Xserver.1:
None
/usr/share/man/man1.Z/lbxproxy.1:
None
/usr/share/man/man1.Z/xf86config_convert.1:
None
Xserver.OEM-SERVER-PA,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/etc/rc.config.d/xf86:
None
/opt/graphics/common/ReleaseNotes:
None
/opt/graphics/common/bin/graphdiag:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:15:26 IST 2007)
/opt/graphics/common/kernel/gvid_hw_init/cons/gvid_him_cons:
Built for HP-UX 11.23
(build date: Thu Feb 8 22:52:13 IST 2007)
HW init - Cons (Graphics HIM DLKM)
/opt/graphics/common/kernel/gvid_info/gvid_info:
Built for HP-UX 11.23
(build date: Thu Feb 8 22:52:38 IST 2007)
gvid_info (graphics DLKM)
/opt/graphics/common/lib/libOglTest.1:
None
/opt/graphics/common/lib/libXTest.1:
None
/opt/graphics/common/lib/libdrm.1:
None
/opt/graphics/common/lib/nls/msg/C/graphdiag.cat:
None
/opt/graphics/common/man/man1.Z/graphdiag.1g:
None
/sbin/init.d/xf86:
$Revision: 1.2 $
/usr/bin/X11/Xf86:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:10:48 IST 2007)
SharedX Extension Hooks
/usr/bin/X11/Xvfb:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:11:09 IST 2007)
SharedX Extension Hooks
/usr/bin/X11/xf86config_convert:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:13:15 IST 2007)
/usr/lib/X11/Xserver/info/screens/xf86:
None
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/
libFireGL.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:08:28 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/drivers/
libR7000.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:08:21 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libDbe.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:16 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libDri.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:02 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libExtmod.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:30 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libGie.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:23 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libGlx.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:09 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libHPext.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:44 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libRecord.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:50 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/brokers/extensions/
libSx.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:09:36 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/drivers/libati.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:02:31 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/drivers/libatimisc.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:02:36 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/drivers/libfiregl23.1:
None
/usr/lib/X11/Xserver/modules/xf86/drivers/libr128.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:03:13 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/drivers/libradeon.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:04:04 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/extensions/libdbe.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:32:51 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/extensions/libdri.1:
None
/usr/lib/X11/Xserver/modules/xf86/extensions/libextmod.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:26:23 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/extensions/libexts.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:25:44 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/extensions/libgie.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:35:29 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/extensions/libglx.1:
Obsolete module
/usr/lib/X11/Xserver/modules/xf86/extensions/libhpext.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:34:30 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/extensions/librecord.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:33:35 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/fonts/libbitmap.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:07:56 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/fonts/libfontbase.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:11:45 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/fonts/libfreetype.1:
Obsolete module
/usr/lib/X11/Xserver/modules/xf86/fonts/libspeedo.1:
Obsolete module
/usr/lib/X11/Xserver/modules/xf86/fonts/libtype1.1:
Obsolete module
/usr/lib/X11/Xserver/modules/xf86/fonts/libxtt.1:
Obsolete module
/usr/lib/X11/Xserver/modules/xf86/hpux/libfbdevhw.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:04:42 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/input/libmouse.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:06:23 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libbroker.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:10:01 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libddc.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:06:02 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libfb.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:39:49 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libi2c.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:05:34 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libint10.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:06:45 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/liblbx.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:32:07 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libloader.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:04:23 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libmfb.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:38:21 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libmi.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:24:31 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libpcidata.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:07:53 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/librac.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:05:25 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libramdac.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:05:11 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libscanpci.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:07:46 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libshadow.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:49:55 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libshadowfb.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:00:35 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libvbe.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:53:17 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libvfb.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:11:04 IST 2007)
SharedX Extension Hooks
/usr/lib/X11/Xserver/modules/xf86/libvgahw.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:04:34 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libxaa.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:59:18 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libxf24_32bpp.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:00:23 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libxf86.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:56:10 IST 2007)
SharedX Extension Hooks
/usr/lib/X11/Xserver/modules/xf86/libxf86_os.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:53:22 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libxf86config.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 23:07:20 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libxf8_32bpp.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:59:55 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libxinput.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:31:18 IST 2007)
/usr/lib/X11/Xserver/modules/xf86/libxkb.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:29:25 IST 2007)
/usr/newconfig/etc/X11/XF86Config:
None
/usr/newconfig/usr/lib/X11/Xserver/modules/xf86/extensions/
libSX.1:
Built for HP-UX 11.23
X Window System, Version 11 R6
(build date: Thu Feb 8 22:35:01 IST 2007)
libSX.1.stubs : SharedX stubs library
Order MPower to get a real SharedX library
Xserver.AGRM,fr=B.11.23,fa=HP-UX_B.11.23_PA,v=HP:
/opt/graphics/common/bin/gamma:
$Revision: 92453-07 linker linker crt0.o B.11.16.01
030415 $
/opt/graphics/common/icons/Gamma.l.bm:
None
/opt/graphics/common/icons/Gamma.l.pm:
None
/opt/graphics/common/icons/Gamma.l_m.bm:
None
/opt/graphics/common/icons/Gamma.m.bm:
None
/opt/graphics/common/icons/Gamma.m.pm:
None
/opt/graphics/common/icons/Gamma.m_m.bm:
None
/opt/graphics/common/icons/Gamma.t.bm:
None
/opt/graphics/common/icons/Gamma.t.pm:
None
/opt/graphics/common/icons/Gamma.t_m.bm:
None
/opt/graphics/common/lib/libgrm.1:
GRM Library A.01 Protocol 100 $Revision: /main/13
$
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:52:22 IST 2007)
/opt/graphics/common/lib/libgrm.2:
GRM Library A.01 Protocol 100 $Revision: /main/13
$
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:53:45 IST 2007)
/opt/graphics/common/lib/pa20_64/libgrm.1:
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:52:24 IST 2007)
GRM Library A.01 Protocol 100 $Revision: /main/13
$
/opt/graphics/common/lib/pa20_64/libgrm.2:
Built for: 11.23 on HP-UX Daily, -O +Onolimit
X Window System, Version 11 R6
(build date: Thu Feb 8 20:53:47 IST 2007)
GRM Library A.01 Protocol 100 $Revision: /main/13
$
/usr/lbin/grmd:
$Revis |
