 |
≫ |
|
|
|
パッチ名: PHSS_36164
パッチ摘要: 11.31 rp4440/rp4410 PDC46.34/BMC04.05/MPE.03.30 FW
作成日: 07/03/12
公開日: 07/04/18
ハードウェアプラットフォームおよびOSリリース:
11.31
現象:
PHSS_36164:
BMCファームウェア04.05(最新リリース)で修正した不具合:
-----------------------------------------------------
- MPの"RB"コマンドを使ってBMCをリセットすると、システムLEDが不正にオ
フになることがありました。
- オペレーティングシステムとBMC間のトランザクションを処理するバスがハ
ングしたようになることがありました。HP-UXのEMS(Event Monitoring
Service)はこのバスを使ってBMSからシステムイベントログ情報を取得しま
すが、この問題が起きると、EMSが次のようなメッセージをsyslogに記録す
ることがありました。
"vmunix: ipmi_wd_heartbeat(): timer not refreshed."
問題点の説明:
PHSS_36164:
- 上記の"現象"セクションを参照。
-----------------------------------------------------------------------------
Patch Name: PHSS_36164
Patch Description: 11.31 rp4440/rp4410 PDC46.34/BMC04.05/MPE.03.30 FW
Creation Date: 07/03/12
Post Date: 07/04/18
Hardware Platforms - OS Releases:
11.31
Products: N/A
Filesets:
OS-Core.KERN-RUN,fr=B.11.31,fa=HP-UX_B.11.31_IA/PA,v=HP
Automatic Reboot?: Yes
Status: General Release
Critical: No
Category Tags:
defect_repair general_release firmware
Path Name: /hp-ux_patches/11.X/PHSS_36164
Symptoms:
PHSS_36164:
The following fixes appear in BMC firmware revision
04.05:
--------------------------------------------------------
- Corrected an issue where the System LED may
incorrectly turn off when the BMC is reset via the
MP 'RB' command.
- Corrected an issue where the bus that handles
transactions between the Operating System and the
BMC may appear to hang. The Event Monitoring Service
(EMS) in HP-UX uses this bus to get system event log
information from the BMC, upon this issue EMS may
report the following message in the syslog
"vmunix: ipmi_wd_heartbeat(): timer not refreshed."
Defect Description:
PHSS_36164:
- See Symptoms.
Enhancement:
No
SR:
0000000000
Patch Files:
OS-Core.KERN-RUN,fr=B.11.31,fa=HP-UX_B.11.31_IA/PA,v=HP:
/usr/conf/rp4440srvrflash
/usr/conf/rp4440saveFW
/usr/conf/rp4440fw.wrap
/usr/conf/rp4440bmcfw.wrap
/usr/conf/rp4440gspfw.wrap
/usr/conf/rp4440version.inf
what(1) Output:
OS-Core.KERN-RUN,fr=B.11.31,fa=HP-UX_B.11.31_IA/PA,v=HP:
/usr/conf/rp4440srvrflash:
Server Firmware Reflash Utility version 2.08 for PA-
RISC Servers
/usr/conf/rp4440saveFW:
Data Hdr A 00.01
Save Firmware Image Utility Rev 1.0 _ HP-UX Version
11.11
/usr/conf/rp4440fw.wrap:
Data Hdr A.00.01
------------------------------------------------
MW_0328_4634
Wed Aug 16 13:36:28 PDT 2006
------------------------------------------------
ShortFin CPU API Library Version 2.20
/usr/conf/rp4440bmcfw.wrap:
Data Hdr A.00.01
/usr/conf/rp4440gspfw.wrap:
Revision E.03.30 Oct 27 2006,13:43:15
/usr/conf/rp4440version.inf:
Data Hdr A.00.01
cksum(1) Output:
OS-Core.KERN-RUN,fr=B.11.31,fa=HP-UX_B.11.31_IA/PA,v=HP:
4152844703 133152 /usr/conf/rp4440srvrflash
511149503 32865 /usr/conf/rp4440saveFW
4201177064 4195584 /usr/conf/rp4440fw.wrap
1229899682 624640 /usr/conf/rp4440bmcfw.wrap
2595979842 4434829 /usr/conf/rp4440gspfw.wrap
4276420597 53 /usr/conf/rp4440version.inf
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies:
9000/800/rp4440
9000/800/rp4410
9000/800/rp4410#1
Other Dependencies: None
Supersedes: None
Equivalent Patches:
PHSS_36162:
s700: 11.11
s800: 11.11
PHSS_36163:
s700: 11.23
s800: 11.23
Patch Package Size: 2960 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_36164
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHSS_36164.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHSS_36164. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHSS_36164.text file is
available in the product readme:
swlist -l product -a readme -d @ /tmp/PHSS_36164.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_36164.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
1. This patch will only install and update the firmware
on these systems:
9000/800/rp4440
9000/800/rp4410
900/800/rp4410#1
If you wish to install the patch on a different system even
though it does not apply, you can force the installation of
the patch by touching the file '/tmp/force_patch_install'
before installing the patch. This may be useful when
creating a 'golden' archive image for Ignite-UX that may be
used on several different hardware platforms.
If the patch is installed on a system other than those
listed above, it will not modify the system firmware so no
harm will occur.
2. The existing firmware will not be saved during the
installation of the patch. Therefore, if the patch is
removed the original firmware will not be restored and
the firmware installed by the patch will remain loaded
after the patch is removed.
3. The firmware update is accomplished by temporarily
modifying the autoboot file on the primary boot disk.
To identify the disk, patch assumes that the primary boot
disk is the first disk listed in the /stand/bootconf file.
To ensure the firmware update is successful, please use the
setboot(1M) and ioscan(1M) commands to verify that the
primary boot disk is the first disk listed in the
/stand/bootconf file. If it is not, modify the bootconf
file appropriately. Please reference the man page for
bootconf(4) for information on this file.
4. It is recommended that the firmware update is performed
outside of an OS install, update-UX, or Dynamic Root Disk
session. If a firmware update is performed, it will be
excluded from installation to ensure that OS install,
update-UX, or DRD is fully functional.
5. The firmware update will be excluded from installation
if the firmware revision in the patch is the same or older
that the one the system is running on. This will ensure
that no un-necessary system reboot occurs.
6. Any future firmware versions in the system can be
downgraded with firmware in this patch by touching the file
'/tmp/force_patch_install' before installing the patch as
well as removing any superseding patches.
7. The firmware update will be excluded from installation
if the system is running in a VPAR session. To update the
firmware, shut down all VPAR's and reboot the server into
standalone mode using the primary path.
8. The firmware update will be excluded from installation
if the autoboot flag is not set. This is to ensure that the
end-to-end firmware update process goes smoothly without
user intervention once the patch installation is started.
Please use setboot(1M) command to set the autoboot flag on
prior to installing the patch.
9. The firmware update will be excluded from installation
if the BMC Administrator Password is set. To update the
firmware, clear the password by interacting with the MP's
Command Menu and use the 'BP' command.
10. The firmware update will be aborted if the currently
installed MP firmware revision is less than E.02.29. In
order to upgrade MP firmware using this patch first update
the MP firmware to E.02.29 and then install this patch.
11. If the currently installed MP firmware revision is
E.03.13 or later, the MP firmware update will fail if
the "Allow MP Firmware upgrade via PCI" option is
Disabled in the MP Security Options menu. To update the
firmware using this patch, enable this option in the
MP Security Options menu.
12. Prior to updating the iLO MP firmware an MP reset
needs to occur via the "XD-R" command in order to free
up enough contiguous memory.
|
